AngryDad223 Posted July 26, 2020 Share Posted July 26, 2020 Hey all i need some advice/help deciding which route to take, I love the look of the M17 but the awful QC reports I’m seeing from every post so far seems to say to stay clear..... the off putting factor on the other hand for the Marui is the seeming inability to use propane with it? Any truth here? Thanks Link to comment Share on other sites More sharing options...
Guest Posted July 26, 2020 Share Posted July 26, 2020 I don’t know anyone who has used the Sig M17 that hasn’t had trouble, they really are a bad VFC gun that comes with CO2 mags which blow it up. The FNX will run reliably on green and red with zero issues, but you might run into fps issues using propane. Link to comment Share on other sites More sharing options...
Monkman Posted July 26, 2020 Share Posted July 26, 2020 I own a SIG & a TM HK45tac...and hands down the TM is waaay better. The Sig is a cool gun and all that, but I am having constant issues with it feeding and cycling properly. Sometimes it cycles fine and accuracy & range is good, but sometimes it's the slide gets stuck and gas just pisses out. TM..no issues at all, none whatsoever. Sig is running on Greengas, wanted to avoid the CO2 as it's too powerfull and cracks the nozzles in the gun. Buy a TM. Link to comment Share on other sites More sharing options...
BigStew Posted July 26, 2020 Share Posted July 26, 2020 3 hours ago, AngryDad223 said: Hey all i need some advice/help deciding which route to take, I love the look of the M17 but the awful QC reports I’m seeing from every post so far seems to say to stay clear..... the off putting factor on the other hand for the Marui is the seeming inability to use propane with it? Any truth here? Thanks A TM doesn't need Propane it will run fine on low power gas. A TM will run on propane you will just shorten it's life expectancy. my team mate runs a 5-7 on propylene he just have to replace them every 18 months or so. I think he is on number 9. Link to comment Share on other sites More sharing options...
RMDavis Posted July 26, 2020 Share Posted July 26, 2020 7 minutes ago, BigStew said: A TM doesn't need Propane it will run fine on low power gas. A TM will run on propane you will just shorten it's life expectancy. my team mate runs a 5-7 on propylene he just have to replace them every 18 months or so. I think he is on number 9. The five seven is made out of cheese though... 😂 Link to comment Share on other sites More sharing options...
heroshark Posted July 26, 2020 Share Posted July 26, 2020 Fnx will run an last fine on propane. There's no comparison or good reason to get the other thing. Link to comment Share on other sites More sharing options...
AngryDad223 Posted July 27, 2020 Author Share Posted July 27, 2020 14 hours ago, Monkman said: I own a SIG & a TM HK45tac...and hands down the TM is waaay better. The Sig is a cool gun and all that, but I am having constant issues with it feeding and cycling properly. Sometimes it cycles fine and accuracy & range is good, but sometimes it's the slide gets stuck and gas just pisses out. TM..no issues at all, none whatsoever. Sig is running on Greengas, wanted to avoid the CO2 as it's too powerfull and cracks the nozzles in the gun. Buy a TM. Cheers chaps Hoe do you find the 45T ? I’ve decided to permanently forget the M17 or anything VFC. For the same money I can buy the 45T and it comes with a suppressor over the FNX Link to comment Share on other sites More sharing options...
heroshark Posted July 27, 2020 Share Posted July 27, 2020 19 minutes ago, AngryDad223 said: Cheers chaps Hoe do you find the 45T ? I’ve decided to permanently forget the M17 or anything VFC. For the same money I can buy the 45T and it comes with a suppressor over the FNX you mean the hk45 ct, its a vfc although well regarded. I'd still get an fnx over it. I thought the tm fnx came with a suppressor. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.