Jump to content

Hamster Has a Clearout, and Doesn't Want to End up on Macks….


Adolf Hamster
 Share

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

  • Supporters

So I’ve decided to have a bit of a clearout, I normally have a policy of not selling gats but tbh I’ve reached the point where I’m only fielding a couple of guns so not much point keeping everything.

 

First up is a boneyard vsr clone, cost me £20 for the bare gun deactivated and with a few hand-me down parts she’s just about functional but not any better than a stock gun, maybe a good base if someone wants a shell to start off a build. Mainly got it to try out bolt guns and it’s just not my style.

Shooting ~0.8j, consistency is ok just a weak spring for our 1j limit.

IMG_20200722_125510.thumb.jpg.955e822ac26b5b5076feacb13d35840b.jpgIMG_20200722_125524.thumb.jpg.cfa13bf42eef4ce10ab6b9e7512b6d88.jpg

Reckoning maybe £40 scope included?

 

Next is an even more boneyard cybergun (kwc?) 1911, no mags and don’t let the externals fool you she’s pretty much dead inside, especially the trigger mech. Pretty much only good for parts, or if someone wants a pre-weathered a1 style body

No idea what she’s shooting, hasn’t been functional in a long time. No mags.

IMG_20200722_125904.thumb.jpg.3ce100ec351f501a86cf31f6a2f54689.jpgIMG_20200722_125849.thumb.jpg.6be9719d1102f8262fd9f7f684e78dda.jpg

£20 tops methinks?

 

Now we have a lockdown boredom project m4, built off an old king arms receiver, has an e&c qd gearbox and a hodge podge of internals, good compression although reckon the hop-nozzle seal isn’t quite right as she’s about 0.6j. she’s wired for a GATE mosfet, currently has a nanohard fitted but a warfet would be a straight swap. only cutoff lever I had that fit had been modded for an internal mosfet so she’s locked to semi. The red dot has a crack in the lens but is still functional.

Again, another parts/project gun.

IMG_20200722_125301.thumb.jpg.d22dd27841f7a6bba3fafae6d76ebca1.jpgIMG_20200722_125308.thumb.jpg.5227889f1d84d46151c7ad5a9f8c60fd.jpgIMG_20200722_125315.thumb.jpg.88e4f823540985675f173bdfe4476ae6.jpgIMG_20200722_125358.thumb.jpg.16c22a271bfc3080dab1dd76d84ade3e.jpg

Maybe £75?

 

Finally we have a VLTOR front rail, pretty weathered but very much a solid piece of fore-end. Comes with the flip up sight and whatever bolt-on rail sections I can find. Was always too heavy for my liking:

IMG_20200722_130058.thumb.jpg.f321da8b5f611fb5c545e3a9d1818c75.jpgIMG_20200722_130105.thumb.jpg.541c80ee38286f0ce66c80a1944c5745.jpgIMG_20200722_130113.thumb.jpg.1843e95e411b4af09b2a664c8d98e94f.jpg

No idea what these are worth, whether it’s legit or a clone, so any advice welcome.

 

First up is a “battle worn” tm hicapa, perfectly functional with 2 leak free mags. Mods wise she’s just running a pdi 6.01 inner barrel and home-brew tritium night sights (they’re not very bright but readable in darkness). Nothing wrong with her shooting wise, I just prefer running a makarov. Was keeping her as a night gun but I doubt I’m going to be doing many night shoots these days:

IMG_20200722_125716.thumb.jpg.2b22d0fb22fd144e04adb3097663e064.jpgIMG_20200722_125725.thumb.jpg.e68065972fc7376fb695bd35bd2542f9.jpg

Reckoning £75 all in?

 

Next is a 40mm launcher of unknown provenance, bit rattly and the safety has been removed to get enough movement to fire a 40-mike properly, otherwise perfectly functional if not pretty. Comes with a pair of 40-mikes that have seen some use but pretty good nick and work just fine. I just don’t get close enough to justify the extra weight of a tube….

IMG_20200722_125559.thumb.jpg.48c2ba11c104330ca77a550e716b8a83.jpgIMG_20200722_125603.thumb.jpg.f7dd1040203b85efadc7a62d85cd3f26.jpgIMG_20200722_125613.thumb.jpg.cf0de8a041f82fbf7381ce31189a6db8.jpg

Reckoning £100 all in (£20 for the  tube and £40 apeice for the shells)?

 

next are a bunch of Cyma 140-round ak midcaps, fielded a couple of times but i preferr the straighter 5.45 type:

IMG_20200722_130024.thumb.jpg.36dabee4b1cc8de63830d4a1527c5fb2.jpg

£20 for the lot?

 

And finally we have this heretical beast:

IMG_20200722_124338.thumb.jpg.5771630875b93c969011ed80bdc919d8.jpg

She started out life as an AGM mg42, but the split gearbox design made reliability atrocious as an aeg and the receiver was pretty weak (dropped it and she bent). She’s been straightened up and has had a pair of 10mm steel bars mounted inside the receiver to re-enforce it, possibly one of the rare guns where “gun hits don’t count” might have some actual validity. the bipod snapped at the pivot point and has been bolted back together as solid as can be done.

 

She’s running a polarstar jack with a modded sr25 nozzle. To get her cycling well at 1j the inner barrel is much shorter than the original, but I’ll include the original (all 650mm of it). Fps is of course adjustable and for added hilarity she can also be switched to semi-only operation if you want the worlds worst cqb gun. The right hand half of the fcu screen doesn’t display numbers but the programming works just fine (you just can’t tell what the actual number is).

Currently she’s setup for firing .2’s at ~1200rpm (to match the original rof) I’ve no idea how fast the box feeds but she should be capable of faster.

 

The original magazine mech was pretty godawful and blew up immediately, much of her life has been spent gathering dust while I figured out how to get something decent on there. Currently it’s a classic army M249 box mag, this is entirely external (it’s a hicap that cuts off when it’s wound up) so it’s entirely feasible to do actual mag changes if you had another box and the box adaptor is removable if you want to revert to classic configuration.

 

Comes with original gurttrommel shell, the plan was to try and 3-d print an adaptor to put the 249 box mech inside it (there is space). Also comes with a polarstar mini fcu and m4 jack nozzle (modded for low-flow but can be reverted to default, it’s just some glue plugging the ports). The sling is a pkm sling.

Not the worlds most accurate gun and it’s a pain to carry, but it makes one hell of an impression.

IMG_20200722_124343.thumb.jpg.753e8063d17d6f35f5c131a4408a4ff9.jpgIMG_20200722_124355.thumb.jpg.3520d82617a84d38fe97862cf67606ec.jpgIMG_20200722_124424.thumb.jpg.89ae4f6aafb5cbe4c06f3e8e83b7d5d1.jpgIMG_20200722_124511.thumb.jpg.1c9670cb591d5836d2df64d22009043b.jpgIMG_20200722_124615.thumb.jpg.5ee2f84a04f8adeae5e9878bb9014e3b.jpgIMG_20200722_124621.thumb.jpg.bd12152c7d01180d45dde4dd2c342c07.jpgIMG_20200722_124705.thumb.jpg.db3ccaff7612084f42998912ad3ac32f.jpgIMG_20200722_124818.thumb.jpg.be95e8677fa4ceb6586969b42b8e38c4.jpgIMG_20200722_124826.thumb.jpg.920bf0db57c4c006719fa0ede227c7cb.jpgIMG_20200722_124911.thumb.jpg.d0f9ddcee5fcd36f8bd7a77aa95dda80.jpgIMG_20200722_124915.thumb.jpg.f3d2031e1694423175bbe95667a55475.jpg

Reckoning around the £500 mark?

Any tips on how to the hell you post a package that big would be appreciated, it’s a lot of gun and not light….

 

IMG_20200722_124506.jpg

IMG_20200722_125349.jpg

IMG_20200722_125519.jpg

IMG_20200722_125621.jpg

IMG_20200722_125637.jpg

Link to comment
Share on other sites

  • Supporters
18 minutes ago, L3wisD said:

If I hadn't just got my USP - I'd have had that Hi-Capa off you :(

 

you know what's better than a usp right? ;)

 

14 minutes ago, Chev Chelios said:

That MG42 should be snapped up for £500. Parcel Farce will take it no problem just at the min with the coof they have stopped large & XL stuff shipping. 

 

hmm, might have to look into that and see, i do have the original box i'll maybe try setting it up and seeing what they say.

Link to comment
Share on other sites

  • Mostly Retired Moderators
17 hours ago, Adolf Hamster said:
18 hours ago, L3wisD said:

If I hadn't just got my USP - I'd have had that Hi-Capa off you :(

 

you know what's better than a usp right?

 

might be in touch on payday.

Link to comment
Share on other sites

  • 3 years later...
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...