FreeFrag.UK Posted June 30, 2019 Share Posted June 30, 2019 @Wo1f What sort of light are you using? If it's a Surefire X300 or an Streamlight TLR-1 then a Blackhawk Omnivore should do the trick. Link to comment Share on other sites More sharing options...
Wo1f Posted June 30, 2019 Share Posted June 30, 2019 On 30/06/2019 at 14:19, FreeFrag.UK said: @Wo1f What sort of light are you using? If it's a Surefire X300 or an Streamlight TLR-1 then a Blackhawk Omnivore should do the trick. Expand Sbal-PL. I could get a new light though I suppose. Link to comment Share on other sites More sharing options...
Guest Posted June 30, 2019 Share Posted June 30, 2019 On 30/06/2019 at 14:38, Wo1f said: Sbal-PL. I could get a new light though I suppose. Expand I just picked up an Olight PL2, stupidly bright (1200 lmn apparently). It was enough to dazzle me with a reflection from a white wall in daylight Link to comment Share on other sites More sharing options...
Wo1f Posted June 30, 2019 Share Posted June 30, 2019 On 30/06/2019 at 14:52, rocketdogbert said: I just picked up an Olight PL2, stupidly bright (1200 lmn apparently). It was enough to dazzle me with a reflection from a white wall in daylight Expand I’ve been looking at the Olight range. If I can get a holster for it, that’s what I’m leaning towards. Link to comment Share on other sites More sharing options...
Guest Posted June 30, 2019 Share Posted June 30, 2019 On 30/06/2019 at 15:53, Wo1f said: I’ve been looking at the Olight range. If I can get a holster for it, that’s what I’m leaning towards. Expand It’s VERY similar in size and shape to the Surefire X300, I can get you exact dimensions if it helps? Link to comment Share on other sites More sharing options...
Wo1f Posted June 30, 2019 Share Posted June 30, 2019 On 30/06/2019 at 15:59, rocketdogbert said: It’s VERY similar in size and shape to the Surefire X300, I can get you exact dimensions if it helps? Expand If it’s not too much trouble that’d be great 👍 Link to comment Share on other sites More sharing options...
Guest Posted June 30, 2019 Share Posted June 30, 2019 On 30/06/2019 at 16:30, Wo1f said: If it’s not too much trouble that’d be great 👍 Expand Total Length, including switch Length from front to trigger guard Width Length from mount block rear to front Total Height Height from top of mount block Diameter of lens Length of lens Link to comment Share on other sites More sharing options...
emilianoksa Posted June 30, 2019 Author Share Posted June 30, 2019 The Night Evolutions available on the Bay for 30 quid from China are Surefire clones and pretty good for the money. Probably the same size since it will fit the Nuprol Glock light bearing holster. I have no problems with mine. I'd go for the Omnivore universal , even though it is belt loop and paddle only. Doesn't work with the Serpa molle adaptor or low ride attachment, apparently. Different screw sizes and thread pitch. Still seems like the best option though. And there is enough room inside to stop it from scratching the slide and frame of the gun. You can also get it with tan highlights to match the colour of the FNX45. Which is nice.😁 I will be getting one myself. An Omnivore that is. I'm tired of having to have different holsters for different pistols. The Omnivore isn't cheap but it works out cheaper in the end. And they also do a universal one for non light bearing guns which have rails. One of each and you can get rid of all your other holsters and avoid some of those unsightly scratches on your guns. Link to comment Share on other sites More sharing options...
Wo1f Posted July 1, 2019 Share Posted July 1, 2019 That’s perfect. I’ve had a good google and it seems like the general consensus is it’s should fit in most Surefire 300 holsters Link to comment Share on other sites More sharing options...
RMDavis Posted July 16, 2019 Share Posted July 16, 2019 My FNX 45 arrived today and I'm really impressed. It's a tough call between it and my H&K 45T but it does feel bloody nice in the hand! I ended up changing the back strap for the medium with the straight lines as apposed to the 'stippled' one. I was disappointed to see that the red dot sight mount appears to be specific to the TM micro sight? I might be wrong there, but I certainly can't see a way to securely mount my Vortex Viper red dot which I'm pretty gutted about... Any ideas chaps? 😔 As for a holster I'm currently waiting on 'Kydex Customs' which are making me one that will work with my Olight PL2. I messaged them and asked them whether they could, to which they replied yes and I've just had to send my torch to them so I assume they can mould around it. I will get some photos up when the holster is made 2-3 week wait, but they're making one for my H&K also again with the Olight. 👍🏻 Link to comment Share on other sites More sharing options...
Guest Posted July 16, 2019 Share Posted July 16, 2019 On 16/07/2019 at 21:11, RMDavis said: was disappointed to see that the red dot sight mount appears to be specific to the TM micro sight? I might be wrong there, but I certainly can't see a way to securely mount my Vortex Viper red dot which I'm pretty gutted about... Any ideas chaps? 😔 Expand @Dan1712 Link to comment Share on other sites More sharing options...
Dan1712 Posted July 16, 2019 Share Posted July 16, 2019 On 16/07/2019 at 21:11, RMDavis said: My FNX 45 arrived today and I'm really impressed. It's a tough call between it and my H&K 45T but it does feel bloody nice in the hand! I ended up changing the back strap for the medium with the straight lines as apposed to the 'stippled' one. I was disappointed to see that the red dot sight mount appears to be specific to the TM micro sight? I might be wrong there, but I certainly can't see a way to securely mount my Vortex Viper red dot which I'm pretty gutted about... Any ideas chaps? 😔 As for a holster I'm currently waiting on 'Kydex Customs' which are making me one that will work with my Olight PL2. I messaged them and asked them whether they could, to which they replied yes and I've just had to send my torch to them so I assume they can mould around it. I will get some photos up when the holster is made 2-3 week wait, but they're making one for my H&K also again with the Olight. 👍🏻 Expand Depending on your mount for your viper sight you should be able to modify it pretty easily, It took me around 20 mins to custom modify the mount for my RMR to bolt to the FNX and be very secure. (it may not be the prettiest or best solution but it seems to work perfectly for me ). PM me if you'd like me to see if I can help 👍 Link to comment Share on other sites More sharing options...
hunter511 Posted July 25, 2019 Share Posted July 25, 2019 On 30/06/2019 at 19:03, emilianoksa said: I'd go for the Omnivore universal , even though it is belt loop and paddle only. Doesn't work with the Serpa molle adaptor or low ride attachment, apparently. Different screw sizes and thread pitch. Expand @emilianoksa sorry for the late reply but the Omnivore does have other mounting options. Mine is set up on a G-Code Mule using the mount adaptor Tactical Kit offer. Link to comment Share on other sites More sharing options...
emilianoksa Posted July 25, 2019 Author Share Posted July 25, 2019 Thanks for the tip. I had no idea the Omnivore would fit the G-Code Mule. So do I just buy the Mule and Omnivore or do I also need to get a separate adaptor for them? Link to comment Share on other sites More sharing options...
hunter511 Posted July 25, 2019 Share Posted July 25, 2019 @emilianoksa the SERPA version of this (https://www.tactical-kit.co.uk/g-code-rti-adaptor-kit-for-blackhawk-serpa--safariland-6004-type-holsters-21460-p.asp) screws onto the back of your holster (no mods required) and then its compatible with the RTI mounting plates G-Code use. As a side note the omnivore should already be compatible with any Serpa mounts. Link to comment Share on other sites More sharing options...
emilianoksa Posted July 26, 2019 Author Share Posted July 26, 2019 Thanks. Link to comment Share on other sites More sharing options...
hunter511 Posted July 27, 2019 Share Posted July 27, 2019 Blatant show-off post. On a related note, a trijicon genuine RMR will not fit the FNX without modification. It looks like there are 2 centre punch marks on the 'L' bits that align with the mounting holes on the RMR. However it would need either a spacer plate making up or the mounts grinding back flush. Either way you'd still need to tap and drill holes for the mounting screws. Link to comment Share on other sites More sharing options...
Guest Posted July 27, 2019 Share Posted July 27, 2019 On 27/07/2019 at 17:14, hunter511 said: Blatant show-off post. On a related note, a trijicon genuine RMR will not fit the FNX without modification. It looks like there are 2 centre punch marks on the 'L' bits that align with the mounting holes on the RMR. However it would need either a spacer plate making up or the mounts grinding back flush. Either way you'd still need to tap and drill holes for the mounting screws. Expand Yup. The pot metal (zinc-aluminium alloy) means it’s almost impossible to tap threads into the BBU, just ask @Dan1712 Link to comment Share on other sites More sharing options...
Dan1712 Posted July 27, 2019 Share Posted July 27, 2019 On 27/07/2019 at 17:14, hunter511 said: Blatant show-off post. On a related note, a trijicon genuine RMR will not fit the FNX without modification. It looks like there are 2 centre punch marks on the 'L' bits that align with the mounting holes on the RMR. However it would need either a spacer plate making up or the mounts grinding back flush. Either way you'd still need to tap and drill holes for the mounting screws. Expand 1 Advanced issues found ▲ 1 On 27/07/2019 at 17:45, rocketdogbert said: Yup. The pot metal (zinc-aluminium alloy) means it’s almost impossible to tap threads into the BBU, just ask @Dan1712 Expand Drilling and tapping the crappy metal the bbu is made out of is very hard if not impossible I found. it didn`t come out the other side looking too great 🙈 It is definetly possible (or how would TM do it XD) but doing it by hand is definetly not easy at all. Link to comment Share on other sites More sharing options...
hunter511 Posted July 28, 2019 Share Posted July 28, 2019 @Dan1712 so.. how would 1 go about mounting an rmr? Link to comment Share on other sites More sharing options...
hunter511 Posted July 31, 2019 Share Posted July 31, 2019 Soooooo Anyone got any reccomendations on how to gas the mags given that the cans of abbey 144 I just tried all bottom out on the base plate? Ideally I'm looking for a shorter baseplate option. Currently trimmed down the plates a bit with a scalpel but it looks bork. Link to comment Share on other sites More sharing options...
Guest Posted July 31, 2019 Share Posted July 31, 2019 Abbey extension, or better use Nuprol, has a longer reach Link to comment Share on other sites More sharing options...
Dan1712 Posted August 5, 2019 Share Posted August 5, 2019 On 28/07/2019 at 00:47, hunter511 said: @Dan1712 so.. how would 1 go about mounting an rmr? Expand Apologies have been away h past few days so I missed this Are you trying to mount an actual RMR or a dr style sight? If your trying to use an RMR then its quite easy, I started with the Glock mount that came with my sight and ground off the rectangle part that mounts it to the Glock, I then cut the plate down to the sight was just at the front of the sight cut out on the fnx already. Lastly drilled two holes to line up with the threads already in the bbu and countersunk them and that's it all done. id say all in took about half an hours work and looks awesome. Excuse the self vector promotion its the only pic I have on the pc of the fnx Link to comment Share on other sites More sharing options...
Guest Posted August 5, 2019 Share Posted August 5, 2019 Gratuitous pistol pic Link to comment Share on other sites More sharing options...
Dan1712 Posted August 5, 2019 Share Posted August 5, 2019 On 05/08/2019 at 18:04, rocketdogbert said: Gratuitous pistol pic Expand Show off with probably the only black TM FNX out there 😂 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.