Canen Posted March 15, 2019 Share Posted March 15, 2019 So, I came into possession of the aforementioned beautiful little sidearm a while ago, and I've been dying to use it but it's current FPS is coming back at around 340, which is 10 above my regular CQB site's cap. I googled to see if I could find a way of lowering the FPS below this cap, but it would appear that the options were somewhat limited and involved surgery on the weapon. Before I give up completely, is there anything else I can do to sort this out? Perhaps a part I can buy or a god I can pray to? Please bear in mind my technical knowledge on airsoft guns is limited, as I am new to the sport, so please talk to me as if you were teaching a two year old.... Link to comment Share on other sites More sharing options...
heroshark Posted March 15, 2019 Share Posted March 15, 2019 http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_GBB_Air_Nozzle_Airsoft_Surgeon_Adjustable_FPS_Enhanced_Nozzle_Set_for_RWA_KWC_Cybergun_Elite_Force_Co2_1911.htm Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted March 15, 2019 Supporters Share Posted March 15, 2019 hmm, interesting, i have one of these that was converted to sub 1j by means of drilling a hole in the nozzle and fps consistency (and by extension any hope of accuracy) is nonexistent. might try grabbing one of those see if it makes the thing fieldable. Link to comment Share on other sites More sharing options...
Canen Posted March 15, 2019 Author Share Posted March 15, 2019 12 minutes ago, heroshark said: http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_GBB_Air_Nozzle_Airsoft_Surgeon_Adjustable_FPS_Enhanced_Nozzle_Set_for_RWA_KWC_Cybergun_Elite_Force_Co2_1911.htm You sexy bastard. Thanks so much, heroshark! 3 minutes ago, Adolf Hamster said: hmm, interesting, i have one of these that was converted to sub 1j by means of drilling a hole in the nozzle and fps consistency (and by extension any hope of accuracy) is nonexistent. might try grabbing one of those see if it makes the thing fieldable. That's what I'd read on other forums and a few googles, which I was really loathe to do given the quality of the pistol. I'll chuck some cash at it and let you know how it works for me. Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted March 15, 2019 Supporters Share Posted March 15, 2019 1 minute ago, Canen said: That's what I'd read on other forums and a few googles, which I was really loathe to do given the quality of the pistol. I'll chuck some cash at it and let you know how it works for me. externally she's a beaut, but been nothing but trouble for me, especially leaky mags, kinda put me off co2 pistols tbh. whatever you do, don't go drilling holes in the nozzle if you want to be able to hit anything more than 5 feet away. Link to comment Share on other sites More sharing options...
heroshark Posted March 15, 2019 Share Posted March 15, 2019 No worries bud. Link to comment Share on other sites More sharing options...
Canen Posted March 15, 2019 Author Share Posted March 15, 2019 8 minutes ago, Adolf Hamster said: externally she's a beaut, but been nothing but trouble for me, especially leaky mags, kinda put me off co2 pistols tbh. whatever you do, don't go drilling holes in the nozzle if you want to be able to hit anything more than 5 feet away. Yeah, I'd heard about this. I really like the 1911 and just hope when I can actually use the damn thing that it keeps its shit together. I raised an eyebrow when I read about drilling the gun; now you've absolutely convinced me it’s the worst thing to do. I mostly use a MK23 Socom with green gas mags and although its entry level it doesn’t leak and conserves gas well. Just hope I don’t end up disappointed by leakage. Link to comment Share on other sites More sharing options...
AK47frizzle Posted March 15, 2019 Share Posted March 15, 2019 You could try a large bore barrel which should reduce the fps. Although, never own a cybergun 1911, so no idea what it would be compatible with. But ye, that nozzle seems like it would do the trick too. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.