Help modding Cyma M14 socom for range

[wwcgang]

ok need some help with modding my cyma m14 socom. what basic modification can be done to shot slightly longer distance ?

[Samurai]

Good quality heavy BBs. Thorough cleaning of the barrel and hopup.

[wwcgang]

https://www.amazon.co.uk/Lonex-Reinforced-Airsoft-M14-Unit/dp/B015BPUB1Q

 

this one any good ? 

[Lozart]

22 hours ago, wwcgang said:

https://www.amazon.co.uk/Lonex-Reinforced-Airsoft-M14-Unit/dp/B015BPUB1Q

 

this one any good ? 

 

The installed hop UNIT is fine. You could try a better hop RUBBER though. If you're shooting at around 350FPS then something like a purple Prometheus rubber works well.

 

After that you could look at flat hopping. 

 

[kasaran]

.

On 9/4/2017 at 9:56 AM, Lozart said:

 

The installed hop UNIT is fine. You could try a better hop RUBBER though. If you're shooting at around 350FPS then something like a purple Prometheus rubber works well.

 

After that you could look at flat hopping. 

 

 

Im looking at getting this gun.  Id like the fps max to be 345 for the sites i visit.  One has a 350 fps max and only uses 0.2g bbs the other has a max fps of 345 but i can have heavier bbs. Im thinking going up to 0.25g maybe for that one.  Would that hop up work fine?  Is there varation in rubbers when it comes to bb weight?

[Lozart]

19 minutes ago, kasaran said:

.

 

Im looking at getting this gun.  Id like the fps max to be 345 for the sites i visit.  One has a 350 fps max and only uses 0.2g bbs the other has a max fps of 345 but i can have heavier bbs. Im thinking going up to 0.25g maybe for that one.  Would that hop up work fine?  Is there varation in rubbers when it comes to bb weight?

 

Yes the hop should be fine. In terms of the rubber, at the FPS and BB weight you want to use then no, there will be no difference. You will have to adjust the amount of hop between the two weights though.