Root Admin proffrink Posted June 3, 2016 Root Admin Share Posted June 3, 2016 So I noticed Zenith finally finished the new design for his VSR tabs. I know I mustn't be the only one that has issues with removing stubborn VSR magazines, and I wanted a cleaner solution to the bit of Paracord that I've threaded through VSR magazines in the past. These seemed perfect, but they're expensive because Shapeways charge £9 for shipping. http://www.shapeways.com/product/AYX54S5QC/zenith-fasttab-vsr Being the stingy person I am (and knowing how many of us on here run VSRs), I thought I'd see if anyone else wants to go in on a large order and we all split the postage. Getting them sent out to the UK from me will only cost about 75p anyway, so effectively we could get the postage as low as about £2 per person all-in (assuming 6-7 of us go in on some). Let me know if you're interested. I'll be ordering mine in a week anyway. Link to comment Share on other sites More sharing options...
Hef Legend Posted June 3, 2016 Share Posted June 3, 2016 Why not just ask spoon to whip some up Link to comment Share on other sites More sharing options...
Root Admin proffrink Posted June 3, 2016 Author Root Admin Share Posted June 3, 2016 Actually was my first port of call. He says it's not possible on the V2s to make them any cheaper because they couldn't be hollow. Edit Sp00n is going to try some prototypes and we'll see. Should be able to get them around the same price as Shapeways has them on for. Link to comment Share on other sites More sharing options...
Supporters Samurai Posted June 3, 2016 Supporters Share Posted June 3, 2016 Designing takes about 10 minutes, printing is quick and easy. Too bad I don't have problems removing VSR mags. Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted June 3, 2016 Supporters Share Posted June 3, 2016 I'll jump on board whichever way you decide to go. Link to comment Share on other sites More sharing options...
Root Admin proffrink Posted June 3, 2016 Author Root Admin Share Posted June 3, 2016 Designing takes about 10 minutes, printing is quick and easy. Too bad I don't have problems removing VSR mags. We're all happy for you. Link to comment Share on other sites More sharing options...
Supporters Samurai Posted June 4, 2016 Supporters Share Posted June 4, 2016 We're all happy for you. Ok, here you go. http://www.thingiverse.com/thing:1607574 Link to comment Share on other sites More sharing options...
Root Admin proffrink Posted June 4, 2016 Author Root Admin Share Posted June 4, 2016 Looking good. Maybe 1-2mm narrower though to the edge doesn't catch on something and it's torn off. Thanks Link to comment Share on other sites More sharing options...
Supporters Samurai Posted June 4, 2016 Supporters Share Posted June 4, 2016 Looking good. Maybe 1-2mm narrower though to the edge doesn't catch on something and it's torn off. Thanks I put it on the mag with a weak double sided tape just for the photo, maybe it moved. It is a bit narrower than the mag. Link to comment Share on other sites More sharing options...
Seany.exe Posted June 5, 2016 Share Posted June 5, 2016 Ooh these look nice, I'd like a few of these for my VSR if possible Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.