Heps_417 Posted May 6, 2016 Share Posted May 6, 2016 Hey all, right I've near enough lost my rag with this the sight!!! it slides on the rail fine, I then try to screw it down but it can lifted off with no force at all? Even though I've fully screwed it down? The instructions are as helpful as always and provide no help! Can some one please help!? Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted May 6, 2016 Supporters Share Posted May 6, 2016 either your rail is massively off spec or the clamp on the sight is knackered. Link to comment Share on other sites More sharing options...
Heps_417 Posted May 6, 2016 Author Share Posted May 6, 2016 either your rail is massively off spec or the clamp on the sight is knackered. My rails not off spec as it's had other sights on there so I'm guessing it's the sight! Link to comment Share on other sites More sharing options...
Heps_417 Posted May 6, 2016 Author Share Posted May 6, 2016 My rails not off spec as it's had other sights on there so I'm guessing it's the sight! I've just took the outer housing off and noticed it has been assembled incorrectly, I've fixed it and mounted it to my rail! However... the screw is fully tightened and it's still wobbly in all directions!? Link to comment Share on other sites More sharing options...
tinkle60 Posted May 6, 2016 Share Posted May 6, 2016 Pad it out with something. Unfortunately you really can't expect any semblance of standard from cheap airsoft products. Link to comment Share on other sites More sharing options...
GunmanAirsoft Posted May 7, 2016 Share Posted May 7, 2016 I've just took the outer housing off and noticed it has been assembled incorrectly, I've fixed it and mounted it to my rail! However... the screw is fully tightened and it's still wobbly in all directions!? Never had an issue with them not fitting, you've either got a faulty one in which case you should return it, your rail is a weird size or you're somehow fitting it wrong. If you have an L85 it's possible that it's an 18mm rail on it rather than a 20mm rail in which case some sights might not clamp on properly. Standard weaver/picatinny rails are 20mm. Real steel L85 and some Airsoft versions (including WE) are 18mm. Link to comment Share on other sites More sharing options...
BrightCandle Posted May 9, 2016 Share Posted May 9, 2016 Mine fits ok but the glass is extremely brown and IMO unusable. This is the reason I don't rate the We holo's. Link to comment Share on other sites More sharing options...
Mr Monkey Nuts Posted May 11, 2016 Share Posted May 11, 2016 WE There is your problem. Link to comment Share on other sites More sharing options...
Heps_417 Posted May 11, 2016 Author Share Posted May 11, 2016 I sent it back and ended up getting this instead http://www.patrolbase.co.uk/airsoft-sights-scopes/asg-strike-systems-dot-sight-red-green-1x30-w-mount-black.htm#.VzMr6Mh4WnM (it's literally arrived as I was typing this! #WINNER) Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.