Jump to content

Mechanically locking my ics m4 to semi


n1ckh
 Share

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

As the title says

 

How would I go about locking my ics m4 temporarily to semi so I can use it as a DMR ??

 

I don't want to use a bells & whistles fet as I've installed one already, I'm sticking an m120 spring with a hi torque motor into using another upper gearbox so I can swap them out at a moment's notice

Link to comment
Share on other sites

little bit of solder or something to prevent the tappet plate from moving all the way back?

personally I like what fire-support (at least I think it was fire-support) where they drilled a small hole and threaded it for a tiny bolt which prevents going into full while the bolt was in.

Link to comment
Share on other sites

  • Supporters

Burst fet one of them plug in ones for quick fix

 

Lock burst to single shot perhaps ?

 

Actually might have one them crappy avacado burst bollox things around - small tamiya that might work

Ask around or have a Google n see if it might work

If so his a shout and maybe a fiver if it does the job in the end

Link to comment
Share on other sites

  • Supporters
  On 29/09/2015 at 18:29, n1ckh said:

As the title says

How would I go about locking my ics m4 temporarily to semi so I can use it as a DMR ??

I don't want to use a bells & whistles fet as I've installed one already, I'm sticking an m120 spring with a hi torque motor into using another upper gearbox so I can swap them out at a moment's notice

Wait you got a bells n whistle fet already ??

 

Then if its programmable then set it to one shot burst

Link to comment
Share on other sites

I like the idea of the bolt job to restrict the selector plate :)

 

Cheers for the offer duck, I'll look around & get back to you mate :)

Link to comment
Share on other sites

  On 29/09/2015 at 19:09, Sitting Duck said:

Wait you got a bells n whistle fet already ??

 

Then if its programmable then set it to one shot burst

 

My bad duck, as usual my brains worked than faster than my hands, I've got a basic mosfet permanently installed

Link to comment
Share on other sites

  • Supporters

Have a butcher's around, somewhere I saw on some Philippines airsoft site about the avacado burst

 

Either it worked with a basic 3034

or

It didn't -lol

 

Yeah I know that helps a lot but saw something but can't for life of me was it a yey or ney outcome

 

Think the burst stuff was something to do with a Philippines guy programmer.

No I wasn't look for a new bride or odd lady boy site

But something about a Philippines AIRSOFT site n burst wizards

 

If you end up on a totally different site do not blame moi

Link to comment
Share on other sites

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...