Tezza211 Posted August 17, 2015 Posted August 17, 2015 Hey guys just received my rifle and I'm not to happy with the accuracy now I'm looking for a tight bore for it but here's the issue I have a 435mm inner barrel and I'm not sure what barrels are compatable ? Thanks
Supporters jcheeseright Posted August 17, 2015 Supporters Posted August 17, 2015 tightbore won't necessarily help with accuracy, I'd change your hop bucking and nub first.
Tezza211 Posted August 17, 2015 Author Posted August 17, 2015 Ooo could you recommend any In particular
Supporters TheFull9 Posted August 17, 2015 Supporters Posted August 17, 2015 Make sure to give the stock barrel a good clean out as well if you haven't already, probably coated in dirt and gunk from the factory.
Tezza211 Posted August 18, 2015 Author Posted August 18, 2015 Cool guys best way to clean it I'm a newb to airsoft ?
Supporters jcheeseright Posted August 18, 2015 Supporters Posted August 18, 2015 cleaning rod with a bit of lint-free cloth on the end, first couple of pulls soak it in some kind of alcohol (I use cheap vodka if I can't get hold of proper rubbing alcohol). Just keep pulling it through until the cloth comes through clean.
joshcowin Posted August 18, 2015 Posted August 18, 2015 Hop rubber wise, promethius, madbull, firefly are decent
Supporters M_P Posted August 18, 2015 Supporters Posted August 18, 2015 Clean out the barrel, hop rubber and hop unit as said. WE rifles often take a while to wear in and are often crap till done so, so keep putting rounds through it. Worst case scenario switch to a maple leaf nub and bucking- probably worth doing anyway, makes a difference. Try not to play with the quick release barrel nut too, apart from when needed, it's a stress point and best left alone.
Tezza211 Posted August 18, 2015 Author Posted August 18, 2015 Is the barrel but the one with the spanner attached to it under the forward rails ?
Recommended Posts