We msk (acr)

[Tezza211]

Hey guys just received my rifle and I'm not to happy with the accuracy now I'm looking for a tight bore for it but here's the issue I have a 435mm inner barrel and I'm not sure what barrels are compatable ? Thanks

[jcheeseright]

tightbore won't necessarily help with accuracy, I'd change your hop bucking and nub first.

[Tezza211]

Ooo could you recommend any In particular

[TheFull9]

Make sure to give the stock barrel a good clean out as well if you haven't already, probably coated in dirt and gunk from the factory.

[Tezza211]

Cool guys best way to clean it I'm a newb to airsoft ?

[jcheeseright]

cleaning rod with a bit of lint-free cloth on the end, first couple of pulls soak it in some kind of alcohol (I use cheap vodka if I can't get hold of proper rubbing alcohol). Just keep pulling it through until the cloth comes through clean.

[joshcowin]

Hop rubber wise, promethius, madbull, firefly are decent

[M_P]

Clean out the barrel, hop rubber and hop unit as said. WE rifles often take a while to wear in and are often crap till done so, so keep putting rounds through it.

Worst case scenario switch to a maple leaf nub and bucking- probably worth doing anyway, makes a difference.

 

Try not to play with the quick release barrel nut too, apart from when needed, it's a stress point and best left alone.

[Tezza211]

Is the barrel but the one with the spanner attached to it under the forward rails ?