Jump to content

Favourite Weapon


airsoftdirect
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

My personal favorite is my Sniper Machine Gun P90 AEG with SPIN UP! Much better than hop up.

It has 450 fps and can hit those noobs that piss everyone off throught the day from 50 meters away! The rate of fire is higher than the echo 1 minigun. It's a sniper, a pdw, and a support gun in one! And now, for a unlimited time, you can get it in BRIGHT MOTHER FCKIN ORANGE. Be proud to stand out on the battlefield. After all. You are the greatest player on your team with this gun.

This is the best airsoft gun in the market and you can buy it for an AMAZING £40! Here at JBBG, the UK's leading airsoft retailer. http://www.justbbguns.co.uk/product/517/2-TONE-BB-GUNS/338/ELECTRIC-GUNS/4/D90H-P90S-PRO#.UrilqKogGSM

I would recomend bulldog 0.12g bb's with this beauty. The greatest bb's around. Top quality.

Link to comment
Share on other sites

Mokyo Tarui C63G*

 

One of the sturdiest guns you can buy really. You can't really f*ck up a Nylon/ABS brick with a V3 in it. Good few people I know use almost or decade old ones with over 100k on the clock. It's probably the only gun clone companies did REALLY well on.

 

Mokyo Tarui 10RSV**

 

Really tough externals,simple and easy to take down and work on,lots of upgrades and really good stock performance. Silent as a church mouses fart and still performs well at low FPS,especially the over volumed Gspec. Mine has over 70k rounds on the clock,doing 250 with a dead on air seal and still lobbing .28s to 50m.

 

SealRword Vragunod***

 

Homina homina homina. Greatest gun of all time in airsoft,ever. I only shot 5 rounds and held it for a minute and I'm in love. almost 6 kilos of machined steel and plywood. True 1:1 scale,almost indistinguishable from the real thing. It's so good It was personally approved by Yevgeny Dragunov's son,Alexi Dragunov and his son,who's an airsofter.

 

*Tokyo Marui G36C

 

**Tokyo Marui VSR 10

 

***RealSword Dragunov

Link to comment
Share on other sites

Mokyo Tarui C63G*

 

One of the sturdiest guns you can buy really. You can't really f*ck up a Nylon/ABS brick with a V3 in it. Good few people I know use almost or decade old ones with over 100k on the clock. It's probably the only gun clone companies did REALLY well on.

 

Mokyo Tarui 10RSV**

 

Really tough externals,simple and easy to take down and work on,lots of upgrades and really good stock performance. Silent as a church mouses fart and still performs well at low FPS,especially the over volumed Gspec. Mine has over 70k rounds on the clock,doing 250 with a dead on air seal and still lobbing .28s to 50m.

 

SealRword Vragunod***

 

Homina homina homina. Greatest gun of all time in airsoft,ever. I only shot 5 rounds and held it for a minute and I'm in love. almost 6 kilos of machined steel and plywood. True 1:1 scale,almost indistinguishable from the real thing. It's so good It was personally approved by Yevgeny Dragunov's son,Alexi Dragunov and his son,who's an airsofter.

 

*Tokyo Marui G36C

 

**Tokyo Marui VSR 10

 

***RealSword Dragunov

AAARRGGHH damn it! you messed with my brain!

 

anyways....

 

I have to confess, I don't have it but i'm in love with the Snow Wolf M82A1 CQB.

 

I love going semi auto and hardly ever go full auto partially because my shyte ak can't go full auto.

 

I love the look of it and I've actually used a Socom Gear m82 before. Super heavy and destroyed my back but it felt awesome. So, as a lighter and shorter option, this would be my perfect weapon.

 

http://www.landwarriorairsoft.com/acatalog/Snow-Wolf-Barrett-M82A1-CQB--Tan--VG_SW_02A_CQB_TAN.html#.Uri7ufRdXXo THAT AWESOMENESS

 

 

Also, my perfect secondary is a TM P90 HIGH CYCLE. I mean, HOW CAN YOU NOT LOVE THIS GUN OUT OF THE BOX?!?!?!?!?!?!?!?!?!?!?!

 

Super fire rate out of the box with an 8.4v, compact enough to sling around shoulder or hand it somewhere. Perfect secondary http://www.landwarriorairsoft.com/acatalog/Tokyo-Marui-PS90-High-Cycle-TM_PS90.html#.Uri8K_RdXXo

Link to comment
Share on other sites

Me being a sucker for German guns (apart from the G36c) and my undying love for G&G's, when I get my UKARA and some sort of income, I think i'm going to get the G&G TR4-18. Then I might try my luck again with sniping and get a TM AWS (L96)

 

Also, I love my WE Glock 18 to bits :wub:

Link to comment
Share on other sites

I kinda love MP5's. I have a Well MP5SD (okayish gun) and a CA MP5 (not yet tried in skirmish but seems pretty good). My dream gun would probably be a G&G top tech MP5.

My other gun is another H&K, the HFC H&K MK23 Socom. It's an amazing pistol, non blowback means its very quiet and it comes with a silencer that incorporates an extended inner barrel. This means that it is the absolute best gun for silent takedowns in a CQB environment. The best bit though is it cost me £45 new :) Kinda tempted to buy a 2nd one, shave my head and get a barcode tattoo :D

I've been toying with getting a G36 next, dunno what it is about H&K guns?

Link to comment
Share on other sites

  • Supporters

ICS AKS-74U => needs a spring upgrade from stock to an Element M105 to make it outperform an average AEG in woodland settings since it fires @318+/-2FPS stock. They are so well built that their consistency is incredible, even when they have been heavily used, which is a bit of a bummer (not really but read on) because the stock spring is attached to the POM piston pretty solidly and I couldn't get them apart, so it was easier to use an ICS Drilled Aluminium Piston and a Double O-Ring Piston Head w/ Bearings I had lying around from another project.

 

This has reproduced the previous consistency, but unless you're prepared to buy bits like that whenever you see them going cheap, as I do, regardless of whether I have a purpose for them at the time, you'd have to pay a fuck sight more than usual for a simple spring upgrade :lol: That said, I did not apply any of what I would define as "brute force and ignorance" to the task of separating the stock spring and piston and, for all I know, mine may just be a pig like that, especially considering that it had already been hammered before I got it. Probably best to get the shop gun tech to install the spring before you get it - make it their problem not yours :lol:

 

Obviously the addition of a TBB helps - the Systema BS 6.04mm one I have in there at the moment is good, but not as good as the previous one. The problem is I can't remember the manufacturer :lol: but it is a 6.02mm chromed brass one and will, the next time she's in bits, be going back in...

 

Oh yeah, and the stock flash hider has to go... whomever decided that a funnel is what you want on a muzzle needs to have one inserted. The standard AK-74 flash hider looks great on there though, see:

 

39979249823539689167423.jpg

Link to comment
Share on other sites

GG top tech mp5,it has a lovely solid feel and shoots like a dream....I bought it as I wanted one weapon that was capable of undertaking just about any role,cqb,woodland or urban shooting

post-8266-0-14112800-1388137560_thumb.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...