Wo1f

Wolf armouries have them in I believe

I use the plumbers/welders propane I guess you’d call it. Usually rothmans branded I think. Cans are tall like a GG can but thicker.

Airsoft innovations. The tan coloured plastic one. Done the green gas mod (cutting the tubes down, not removing). Nothing to the valve itself.

Mine ran great at the night game on Saturday. 4 degrees and briefly snowing ran on propane topped up with some Mapp gas. The modify tan does seem to wear down quicker, but the results are great. I think I’ll get the other modify bucking and run some tests. I’ll post up what results I get.

I thought it was a ptw scar. Got any links to this?

416 receiver I believe

A man of refined taste if I do say so myself

Ready for a night game

That’s plan B. The plug looks like it’s a 2.5mm jack where the dual pressure switch is a 1.5 jack. A friend of mine is going to attempt to solder the end I need onto the switch. I don’t trust myself to that extent with a soldering iron.

Dbal a2 and a pressure switch that doesn’t bloody fit it 😑

Be interesting to hear what you think of it after a bit of use. Been looking at them for a while but I don’t know if it’s worth ditching my crossfire ii for one

I thought that was the shite KWA version?

They kinda did, didn’t they? The haphestus custom one?

Must be an LMG weekend... bullgear PKM mag insert bullgear CNC hop chamber Barrel and sorbo from AK2M4 5000mah 11.1 LIPO and a raptor PKP to put it all in. Much better than a TM mk46 for half the price. Bloody heavy though...

This is probably the most annoying part. GHk fanboys keep quoting they have more aftermarket support but they really don’t. TM just needs an adapter ring for some rails because of the lip on the barrel. Personally I have just bought an aftermarket barrel and it fixes the issue without the need for an adapter. (bought a longer than standard for my mk12 and a shorter than standard for my URGI) . The receiver is AEG thread so it will take virtually every airsoft rail/hand guard. Pistol grip is RS/gbbr spec same as the Ghk and the stock tube is milspec which I also assume the Ghk is. GHK uses AEG spec barrel and buckings out of the box. TM is VSR style.

You can actually hit someone at distance out of the box with it. It’s within FPS limits out of the box. It’s got a cerakote finish that’s really nice and hard wearing. Had a good hop setup, not an awful plastic one you need to dismantle the hand guard to adjust. Cheaper mags. Much better and less bitter community... GHK pro’s: the trigger looks more realistic. Considering you can’t see it unless you’re cleaning it that’s kind of irrelevant. Trigger pull is nicer. Kicks a bit more but isn’t as ‘snappy’ unless you’re running £70+ co2 mags. Owned and build multiple GHK’s and MWS’

Well I’m not happy with them. Ordered a raptor pkp from them and it’s arrived poorly packaged with pita missing and metal bits snapped off. Sent them a message and waiting on their reply. Why send an 8kg gun in a thin cardboard box with absolutely zero padding.

That’s impressive from a barrel nearly 100mm shorter than standard

That’s cool. What are you like FPS wise with that barrel?

Back of the nozzle inside the BCG

If you’ve got a complete standard bolt, just throw that in and test. If it locks back that your bolt is out of spec or your nozzle is adjusted to the point where not enough gas is going to the blowback. Have you changed the sealing cup cup on the MPA nozzle back to standard? The angrygun one can cause jams.

Have you done anything to the nozzle at all? Fit an NPAS etc? If so, change it back and let us know if that fixes it. have you lubed up your ZET plate in the lower by any chance? Grease etc will slow it down dramatically

There needs to be about 2.5 threads showing between the end of the buffer tube and the buffer retention post if I remember correctly.

What rail? Mad bull are generally good quality. I had a Viking tactical rail made by them years ago and it was very nice