Austeyr

CL Project was on fire support but out of stock so set up an email reminder. Gonna refit the restrictor so I can field it this weekend though

Sadly not, but have had a look around and will get one asap! Thanks for the help!

What would I be looking for in the nozzle to see if it is an NPAS?

At the risk of sounding very stupid (Nothing unusual!) Is this shiny silver adjustable thing the NPAS adjuster? My fps is 225 roughly on a 0.25g bb which seems a little low ?

I’m not sure as I’m not rich enough for an LCT haha, sorry!

I swear everything he lists ends up here because it’s a few quid under retail ?

Yeah, they are interchangeable ? source: I own both

The blu-link literally is just a controller for Gate mosfets. Unless you’ve fitted a gate aster or Titan into the L85 the blu-link won’t do anything for you at all I’m afraid. They’re an awkward gearbox, to my knowledge no programmable mosfet will fit into one

Doesn't sound like much of a difference to airsoft ?

I’ve now fitted 3 slim grips to my LCT AK’s and have only just thought of this… Should I be changing my gears out for high torque as well or will stock LCT gears be fine for a while? Taken from HPA.Uk the specs are: 8.4V DC 26500rpm TORQUE 300

Has been for years tbh. They get outdoor sites up and running, trash the land or have the farm life harmed (One of their sites was a working farm and a player thought it would be hilarious to shoot a pig?) then get kicked out. They went into “liquidation” a while back and then was miraculously bought out the next day but kept the same trading name ? The same area they were using allegedly had an application for axe throwing denied a few months prior. Seems to be a case of trying to avoid the legalities, getting caught out and their players kicking up a huff. I doubt a petition will sway the local council

As long as it’s an AEG thread for the nut it should fit

I guess it counts as made ? Bought an S&T Mosin on a whim because the price was great from @Pierre It was missing the front sight/muzzle as S&T for some silly reason have it split and held on by a grub screw?! Purchased a PPS mosin barrel (And extras) from @airsoftshooter123 with a hope and dream of fitting the barrel to the S&T After eight hours of grinding, sanding, testing and a lot of “oh ffs” The barrel has been transplanted to the S&T and now I have a “historically accurate” one piece barrel ? Found an original Izhevsk front sight too (Which matches the “manufacturer” of the S&T) to finish it off! Eyeing up the bolt action dude upgrade kit & the BAD PU bolt if/when he releases it and a PU scope now. Wrap it in some burlap and go all “Enemy at the gates” ?

Wood ones being retired anyway, stocks getting really wobbly due to poor securing points. Only used it once ? it’ll be a place holder until I can afford a real sword or LCT

Well, I have finally found the cause. After putting the stock piston back into my replica it was still all over the place. Fast forward a few days and I buy a lovely replacement from @strykerles For shits and giggles I figured I’d try the hop up from his (Which was consistent with nearly every shot) and my old wooden furnitured SVD was also consistent! Huzzah!

I think I found the fault. My piston is cracked near enough all the way down… And they’re out of stock ?

After messing about more and taking the gearbox apart a million times, the issue still persists. FPS is all over the board. I've checked the hop unit a million times too... Very lost. I thought perhaps air seal issue, but I don't think an air seal issue would cause 200 - 300 fps variations?!

I went back to the original black bucking and nub as thought the ML may have been the issue.

Wanna do a third? ? I think I found the cause, the nozzle spring is a bit worn and not sitting straight

Gone back to trying to fix this headache. I fitted a Cyma nozzle and cylinder head, fps is all over the place still (114 - 492 on a .28g BB) I noticed the nozzle seems to do this strange “bounce” IMG_8266.mov

When this was initially listed, I was ready to buy it until I saw it was from the Netherlands and his shady "buyers risk" and quickly realised

Replica + 7 mags & 3 - 5 day shipping for £745. Replica alone over here is nearly £700 I must admit, their prices have gone up but then so has WGC (Tiger111 was cheaper than WGC on the ak too!)

Gave in and back ordered a VFC AK74M GBBR from Tiger111HK. Meant to be early March restock, wonder when it will actually be restocked ?

You didn’t miss much bud, hit calling was atrocious today - Other than that it was your average day at Splatoon ?