Austeyr

Umarex/Ares G36X. All external work was carried out by the previous owner: Barrel extension secured with either glued or loctite Paint job is mediocre at best, may look okay once worn in but each to their own One side of the handguard retainer has been drilled out. The pin will stay in place however the flat side has to be on the damaged hole side or it will fall out Cheap carry handle optic with the reticle being tilted (Picture makes it look worse, it's rotated at roughly the 1 O'Clock position) but magnification and glass is of good quality Internal work (Carried out by myself): Wiring repaired from where the previous owner had destroyed the majority of it Rewired to deans Begadi MAXX g36 hop unit installed, I don't recall what bucking is in it however it'll be a maple leaf of some kind no doubt Maxx adjustable nozzle to pair with the Begadi hop unit Piston replaced Electric blowback removed Motor was changed out for a generic new spare motor as the one it had when I purchased it made a lovely burning smell when you fired it Will include x3 PTS G36 mags that feed flawlessly, possibly a bag full of G36 mags that may/may not work in it too if I can find them (Roughly 8 mags iirc) I haven't fielded it since building it so honestly can't speak on how it'll perform, however chrono'd at 290ish on .25g BB's consistently with a 3 fps variation up/down. Obviously with it being Ares and their proprietary EFCS on the exterior of the gearbox it's limited on what it can achieve however a JG G36 gearbox will fit into the replica beautifully (Which was my initial plan and build a second AEG G36KA4 but that didn't come to fruition) Price includes postage, paypal only please. Reposted due to automatic renewal keeping adverts at the back

I bought this from the classifieds last week under the assumption it was a Cyma, sadly it was a WE Aeg. The rifle itself is pretty nice, however I don't like the extras on the gearbox shell like the bolt latch etc which seem important to the case sitting in the receiver correctly. When I received it, the motor sounded like it was dying so I've replaced it with another generic V2 style motor. The hop unit has a maple leaf yellow bucking and an omega nub fitted. The inner barrel has marks to show it's been cut down, not sure why. I hollowed the stock out a bit more so that the battery connector could be pulled through should it need disassembly at any point - This was done when I replaced the Tamiya connector with a Deans style connector. The receiver had some scratches which I covered over with paint however the paint as well as a horrible CE mark, however admittedly the paint hasn't covered the CE mark very well. Will be sent with one mid cap which I received when I purchased the replica, as well as the carry handle. Price includes postage and fees. No original box etc as it was sent to me the same way. Low FPS, around 0.7J which I assume is due to the shorter inner barrel. Never got around to fixing it up when I saw the WE gearbox shell as I knew I wouldn't be keeping it. Knew I'd forget something - Not pictured but it will include a KAC style broom handle grip