-
Posts
28 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by B4by_Dr1v3r
-
-
https://www.patrolbase.co.uk/cyma-ak-fire-selector-plate?fv=16821 https://www.patrolbase.co.uk/cyma-tactical-extended-fire-selector-lever-for-ak47-74-aeg . Specna and CYMA (vfc spec ones, 040, 048 etc) are supposedly entirely compatible save for minor fitment issues.
-
-
-
Ah, apologies, this is true - I've known people to use thick perspex/acrylic too like you say - still a great source of disks
-
Hey there! https://www.ebay.co.uk/itm/283588380472 One of these could work, 20mm wide, at least 3mm thick - you use large heat shrink to keep it on, then trim that to clean it up. Here are some examples, including one torch!
-
CYMA G36 - Negative Airsoft Upgraded
B4by_Dr1v3r commented on Point Two Balls's advert in Electric Rifles
-
-
Ideas: https://docs.google.com/spreadsheets/u/0/d/1SP0FAw9ytpG-p-mNt8c2po8mVRdOfkdP/htmlview?pli=1
-
-
-
Oof, yeah take it easy on that, at least like you say you were able to keep doing something at the time - did something similar stepping a football that I didn't realise had been kicked under my feet from behind me, actually fractured a metatarsal as I put all my weight on a sideways foot to instinctively stop myself falling.
-
Oh yeah not dissing it, very cool stuff indeed!
-
Funny how it's literally just this dude
-
Time Left: 11 hours and 41 minutes
- For sale
- As new
A panel of three single or double M4 magazine pouches, elsticated to keep single magazines secured. 6 molle wide, 3 rows down. CRYE Multicam 1000D Cordura Nylon fabric, water resistant. Large eyelet drainage holes. Elasticated to ensure even single magazines stay secure. Internal flap retainer strap (Pic 4) to enable use as open top pouches. Decent seams, no loose threads. Brand is unknown, most likely Warrior Assault Systems. Unfortunately will not close over AK74 or AK47 magazines. Look at it in 3D because why not lol: https://www.kiriengine.app/share/ShareModel?code=5SD7ID&serialize=9b360daa86b24b30b9e4ad1931387dc2 £15 + £5 Postage (Royal mail 1st class parcel) Contact via WhatsApp if it's easier: 07396703567 Thanks for looking!£15
St Austell
-
-
What have you just 3d printed (for airsoft)
B4by_Dr1v3r replied to sp00n's topic in Guns, Gear & Loadouts
-
Yeah, true there - should've just said motor recommendations in general, they're pricey but worth it over other budget options if you save up for one in the long run.
-
This range, mostly known as ASG Infinity (just as that's what's on the side) but sometimes with the added Ultimate in shop listings, yeah.
-
Yeah, here here and all that; Budget motors ASG Infinity 18k (28 TPA) ASG Infinity 22k (22 TPA) Gears SHS 13:1 or 12:1 gears MOSFET Perun Hybrid V2 precocking etc Edit: Batteries wise an EDGE can take an 11.1v stock and that'll instantly increase trigger response over a 7.4v so unless you have one find an 11.1v from any of these companies: Zeee, GensAce, Turnigy, CNHL (China Hobby Line), Racedayquads (RDQ), Tattu, GNB (Gaoneng), Auline or Ovonics This is just to have a guarantee of legitimate rating claims and cell quality, there are others but this is a trusted list
-
What tools have you used for the markings?
-
My Specna EDGE 2.0 ak-105: Replaced the plastic handguards with Specna's wooden ones, shimmed them and the folding stock so it's all rock solid, used gorilla tape to keep the hopup center, yet to shim and relube the gearbox and buy a few upgrade parts and still haven't skirmished with it but I'm loving it so far.
-
I'd have just gone with the hybrid.