ikarma70

Not illegal as we refill the soldering blow torch bottles and we have the proper facilities. Heard bad things about the madbull adapter unless it was an earlier version.

Hi all, I have just got a kwa glock 19 with full trades( must be a pre glock getting arsey example!) and I would like to run it on propane if I possible. However I'm having difficulty finding the right adaptor for the Coleman but I can get propane from work so I would need a refillable bottle, any suggestions? Lastly how many if you guys use lasers on your pistols? Atb Andy

I bought a kwa glock 19 with full trades in good condition. Decided to go green gas as I am looking to use Coleman propane if I can.

Wouldn't fitting a slightly stronger spring to the valve reduce the fps or packing the standard spring to increase spring tension? I do this on my crosman co2 pistols.

Take it back to the shop, if it's not fit for it's intended use then you can get a replacement or a refund under the 1974 consumer act.

Ok I seen one my supplier has and it's a WE XDM 3.8, any good? I know it's not co2 bit I would buy the bulk Coleman propane cylinders anyway if it's a good gun.

Ok well I'm not having much luck in finding a decent ww2 co2 GBB so let's throw this open to all co2 nbb or GBB and ww2 is not essential!

Src any good

I get my co2 capsules for 35p

Are the any good KWC co2 pistols?

What about a WE 5.1?

Hi guys, buying a GBB pistol and I have my eye on a WE 1911, are these any good and are there any better? I would like to keep my loadout as close to ww2 as possible so beretta and glocks are not in the equation, however I do like Lugers and Brownings. Co2 is a viable option for me too. Atb Andy

Ah thankyou for that, just made my job easier! Thanks buddy!!

Hi all, does anyone know if silver plated wire is called something else as I can't find it on eBay or maplins? Thanks Andy

Too many?....PAH RUBBISH! you need at least 2 back ups for each gun you have

Need to m100 spring fitting in my KA tommy gun military and to relube it, can anyone help? Atb Andy

A g&g cm16 is a good gun, although the externals are plastic, it's really good quality plastic and very hard wearing. The internals are the same as their top tech range and are very reliable. The combat machine range is possibly the best budget range out there and they cost around £130-150. Then I would buy 2 or 3 7.4v lipo batteries, a good smart charger and some decent magpul spring fed magazines plus some protective gear and possibly that will leave you a few quid left over for some extra goodies or perhaps a nice pistol. Not a fan of m4's but it is a very versatile platform and highly customisable.

If one isn't already fitted, a tight bore barrel should increase the fps.

Well the hop up and barrel is a good place assuming there isn't a tight bore barrel already fitted. Do you know what fps the gun is doing?

Depends on the gun you buy, some need a few parts but some need more.

I own a Dragunov svd springer and I can hit a tin can at 40 yards quite easily. I chose the svd springer purely down to the fact it uses AEG springs, all I have down to mine is upgrade the hop up and fitted a 650mm 6.03 tight bore stainless barrel and it really is a simple gun to work on plus there is a co2 gas conversion kit that is easy to fit. I would also recommend the cocking bolt extension as you can get very sore fingers after a while. It's also the only dedicated sniper that comes with iron sights as standard and it comes with a 60 round magazine. I would suggest trying a few sniper rifles before you buy.

I used Darren to buy my hop up upgrade and I found him to have excellent customer service!

Hmmm then there are a lot of rfd's doing it and quite publicly too so sorry but I stand by my original statement!

I could find out. When I got my Dragunov from an RFD and they said it was defined as an air gun due to its fps. I also bought a dan Wesson 6" 6mm on those exact conditions.

http://ukapu.org.uk/wp/?p=566