jsmithski

I just ordered the Ra-Tech Black NPAS but see what I’ve came across. Anyone tried that DIY NPAS? Super simple to do (the example is from WE)

See if you can get hand warmers. Put them in your mag pouches with magazines, they will keep the temperature.

Anyone tried the G&P complete BCG already? Are they worth the money? I’m looking for a second complete BCG.

Guys, any advice on what upgrades or mods are needed to get a more snappy crispy recoil? I got a feeling that mine (all stock except for hopup and barrel) produce unpleasant sound comparing to my other gbbrs.

Just installed into the stock hop up chamber. Seems to fit in just perfectly. https://www.evike.com/products/47672/

Muslim is not a race so how can he be racist? Maybe Islamophobic but that’s like being vegan, you just don’t fancy certain ideas in your life.

or KWA LM4 cqb valve. Or cut the valve spring a bit. Or both (most likely only then you’ll get to 1J).

No matter what FPS you’ll have, use green autobot bucking if you’re going to have the fixed hop up, also pair it with a crazy jet inner barrel. Make sure you have spare nozzle, hammer spring and few nozzle springs.

One of the best additions is the maple leaf/ra tech hop up chamber and barrel. There are several upgrades available but seriously keep it stock and you’ll be happy. It is a great gun out of the box. Better spend the money on mags.

Most likely (99%) you put the lever arm in the wrong spot. I did that the first time.

There are many factors here. Do you have a good seal on the nozzle2bucking? What green gas are you using? I’m pushing over 2.6J using 380mm barrel, autobot bucking and KWA rocket valve in the nozzle.

@Bada Bing just noticed something on your SD3 video. You did not remove the rubber plug, with that part in, your lever does not work at all, so when you removed it completely you obviously did not notice any difference. Remove the rubber plug and then tell me if you feel stronger recoil or FPS increase.

Maybe they got better these days, I got very bad experience using bio bbs few years ago and I decided to leave it until some convinced me. I remember bio bbs swelled so much on me I could not get them out from a midcap mag. Maybe it’s time to do some testing again

Give me a quote. Is that a v1 or v2? Shipping to Poland. Another info from VFC (apparently they like me): “there is an oval rubber piece includes in V2 conversion kit, which is a locking piece to invalidates the ejector function, in most normal weather days which could saving the gas consuming” so when you insert it, the lever is always in the low position.

Maybe I’ll buy another one then

I’ve asked VFC, here’s what they said “will lock the valve knocker till bolt is ran enough distance to the backward, to make sure the gas output is enough the V2 ejector is redesigned for new magazine pressure” so it’s there to make sure there’s still gas going through when the bolt is traveling back. V2 lever is a bit longer, so it’s probably to make the recoil stronger

Just get your own opinion. I’m done with cleaning my barrel after every game from Bio residue. Bio bbs also suck in humid weather, during a 48hrs milsim it’s a pain when they swell and get soft.

This is 100% true. Longer barrel gives more FPS but there’s no accuracy improvement. There is no single proof that says otherwise.

V1. To me it works the same with or without the lever but I did not do a proper comparison. Here they show a new version of the lever (longer on part close to firing pin), I’m not sure why this is needed, it keeps the firing pin from retracting apparently but the gun operates without it anyway. So what’s the benefit? edit: I think the purpose is to keep the release valve open a little longer (more gas = stronger recoil?). Normally the release valve closes when the bolt starts traveling back, with the lever on it will be open until the bolt engages the lever which is a bit later in the cycle. I will test that but I think by removing the lever I get better gas economy but slightly weaker recoil and FPS.

I’ll need to do some testing then, fill the mag just a bit twice and test with and without to see if there’s less gas used with the lever off. But it would also mean the recoil or FPS is lower without the lever. Interesting.

@Bada Bing do you know what the extractor lever does here? I removed it and see no difference in the operation of the gun except for the fact it does not scratch the bolt anymore.

Looks like the bucking in pinched. Try the new one without the C clip on it

This is weird, hi flow valve gives you more gas not less so recoil and FPS should increase unless there’s a leak somewhere. Swap the valve and test. Is it still the same, worse or better?

Whatever

is it the same as in original TM mags? Swap it and check if possible.