jsmithski

Guys, one of my friends who runs a Polish airsoft store will soon make a huge order from WGC. He promised me attractive prices as he got a deal with them so I told him there’s a great interest in TM MK18, mags and custom parts on this forum. He will make us an offer if we give him a list of items we would like to get. Shipping from PL to UK is not expensive so it may be a great deal to everyone. Obviously individuals will be purchasing stuff through the store so it’s not a group purchase or anything like that so no payment is needed upfront but he’d like to know what items to order. Anyone is interested?

It is not a complete upper. You still need the inner and outer barrel, hand guard, gas block etc. it makes sense to switch to that product not to build another upper with it, that’s the whole point as you can easily replace the inner barrel here.

Important thing is to not twist the spring while installing the nozzle in the carrier. The TM spring is weaker than the DP enhanced (I fckin hate that word popping up on every piece of crap nowadays) spring but the DP works fine on my MWS. 300% probably does not even allow the nozzle to stay with the bucking for a split second.

Continuing the digression I used to play at Tac City North and South, Forge Arena and a cool site in Ventura County. I used to live in California for some time but also few other states.

“Probably” isn’t a good argument don’t you think?

I doubt this has anything to do with adjustment. You can’t twist the spring, also it would not do anything honestly. I just don’t see what the c clip is for if the whole thing screws in/out.

Something is wrong with that design. How come the oring seals against the bolt if it’s not screwed all the way out? And what about the return spring rotation?

disassemble the trigger box and lube all contact surfaces, it helps a bit. The most drag is on the small part here, I think it needs shimming as it scratches the unit body.

It doesn’t look good. Is this a crack?

I lubed the crap out of mine and it still does not sound like that but it’s stock TM one.

I had the same wish when I saw that video first time. I haven’t seen any other that has the same sound though so I bet it’s the mic juju.

Last one on Redwolf went for £900

Got it but is there a posibility to move that screw in/out? There’s an oring on the other side so screwing it out would make the oring sit tighter possibly. I got no experience with GP npas.

I think that “upgrade design” is to better seal against the end of the bolt. Does it allow to screw/unscrew that shiny end part? If so, does it do anything?

Good deal if you bought 4 additional mags for that price.

So how much was that beatutiful mk18? I’m planning to get one for myself too but can’t yet convince my consciousness to get another TM m4.

Please record how the trigger works before and after.

Just note that mapp gas smells like shit so you’ll need to get used to it. Or add some scent oil just like you would add silicone oil to the top of the can before screwing in the adapter

Nope. You need the same adapter that is used for propane bottles. I use this one https://www.airsoftatlanta.com/products/airsoft-innovations-gungas-propane-adaptor-kit

Mapp is as dangerous as green gas, they are all highly inflammable. Black gas is just Nuprol’s trade mark, what it is chemically I don’t know but Red and Black most likely contain propylene. Mapp is just cheaper.

I was testing on 0.3g bbs. On Mapp FPS were over [email protected], Puff Dino was [email protected] and smart gas was giving [email protected]. Using NPAS is a must in such case. I used Rothenberger. When it’s below 10C imho it makes sense switching to Mapp but some small npas adjustments may be required (however on lighter bbs it may not be a problem).

Some info regarding Mapp Gas. Today I was out playing in the cold: 9C but no wind. I did a test using 3 different gases, so here are the results: 14kg Puff Dino: 1J Smart Gas Power Green Gas (they claim it works in low temps): 1.16J Mapp Gas: 1.2J But the real difference was in recoil and cool down. Mapp had no issue firing on full auto even after I emptied the mag by releasing all gas at once (so the mag was really cold). Sorry for no pictures or video but I had no one to help me with that today. I will continue testing even in lower temp.

Yes, the one on my pic is from the mp5, but that’s the same part just different shape. You insert the screw from the inside so that you can use an Allen key later to turn it just like the angry gun npas.

Here there’s no washer, the screw positions the floating valve by pushing it off the nozzle spring retainer. Question to you all, what’s the trick to make the MWS sound like Inokatsu? If you ever heard how Inokatsu m4 sounds then you know what I’m talking about. Anyone has an idea?

Tech tip: if your original handguard wobbles, it is most likely a stripped screw at the bottom of the barrel. Using a few mm longer one will fix it, there’s much more room and the original screw is very short. Since original threading is short you will need use some force to screw in the longer one, but you can do that without a threading tool.