RonLancs

The aim was to get rid of the horrible cheap toy vibes these pistols had out of the box and to achieve the look of the vintage/modified Luger & Mauser props used for the movies
 
A180 weathering inspired by the Rogue One hero prop and the digital renders of the Battlefront videogames
 
DL-44 weathering inspired by the 1977 Episode 4 hero prop
 
physical weathering, chemical aging and a paintjob require equipment/skills and takes long man hours to do therefore it's not cheap at all and most importantly can't be done in your garden with a can of spray paint and tree leaves/mesh
 
stock internals
never skirmished been on display only
hand made wooden wall mounts are included
wall mounts not for sale separately
pistols not for sale separately
I'm in no rush to sell
no swaps
collection welcome from Leeds
paid: £700
asking: £550 including PayPal fees and cost Parcelforce 48 delivery
 
You can text me on 07752937369 for a faster response
 
(I don't use whatsapp so just regular text)
 
please see my trader feedback for confidence 
 
 

Hi all
 
So here for sale is my LCT VSS (she's a beauty isn't she?). Selling it due to trying to thin down the collection for when my gf moves in with me.
 
Shoots like a charm and is very silently as it's nicely shimmed with decent range too.
 
All work done by Skunkworks back when he used to be open:
-Around 320 fps
-Wired to deans, 7.4v lipo (no mosfet)
-Short stroked gears if I remember correctly and reshimmed
-Around 320fps on 0.2
-Slightly better than stock motor
-Wires re routed to go under suppresser thread instead of over to avoid getting cut wires
-Polished stock barrel
-Chinese "Vector optics" 4x PSO scope (problems with this explained below).
-4 100 round mid caps which need new springs (don't feed), 1 50 round midcap, 1 300 round high cap in plum.
 
Issues: So as discussed 4 mags don't feed and need new springs, I believe this is due to me overloading the mags previously (woops).
Biggest issue: So the PSO is rusted onto the rifle and the lever to disengage the mount has broken off, meaning the PSO scope is stuck onto the side of the gun. I haven't attempted to remove this with a hammer or through other means as the scope completes the look of the gun. The other issue being that the PSO is wonky and is impossible to completely zero so it is only used for looks (the bbs shoot slightly to the right and above the reticule). 
 
There is a slight solution to the problem of the PSO being stuck on the rifle: You can unscrew the 4 screws you see on the PSO mount which lets you take off the PSO but will leave the mount attached to the dovetail mount on the side of the gun. 
 
Any questions please ask and no time wasters please. Postage and Paypal fees are extra.
 
Cheers!
 
 
 
 
 
 
 
 
 
 
 

Bought new about 4 weeks ago.
 
Not gamed with, saw a steel and wood AKM and impulse bought.
 
Cars power steering pump has decided to start screeming, selling this softens the blow a bit.
 
I only play cqb or western games so I really don't know why I bought it to be honest.
 
Collection strongly prefered, Stoke on Trent, Staffs.

Internals
 
Gate titan V3 advanced 
upgrade SHS cylinder/piston head
SHS nozzle upgrade
U-3000 ASG ultimate motor 
Retro arms battery cage
Metal hop assembly 
Maple leaf 60 Macaron bucking
Laylax barrel
 
Externals
 
Real Magpul handguard
Original handguard
PTS palm AK grip
OG grip
Clone Zenit grip
Real magpul angled foregrip
Railed dust cover option
og flash hider
LCT Bulgarian style flash hider 
Clone Midwest rail attachment
Clone rail attachment 
T1 sight replacement rail
3d printed odin adapter
Triangle stock option
M4 style stock buffer tube
5 mags 
 
 

Im selling my L1A1 SLR by Ares
Comes with the RIF, 2 mid cap mags and one high cap. Also comes with original British Army sling.
In good condition and has had a tight bore barrel fitted. Only issue is the mag release catch has had a repair done but doesn’t effect use or looks!
 
 
Call on 07731022836 or message on text or WhatsApp!
Can do collection based in Leicester City Centre or deliver for extra £25!

CLASSIC ARMY B&T PROLINE MP5A3 WITH SEF LOWER
 
Definitely gunna hate myself for this, but here we have thee coolest looking oldschool MP5 you can (not anymore) find. This was my first AEG, 9 years ago. It was older than that for sure, and it still runs like a rabbit on heat. It's practically indestructible thanks to Classic Army's stellar build quality. The metal upper feels incredibly solid, and the polymer of the lower group could literally be used to bash nails into conrete. Very robust! 
 
I had the internals serviced about a year ago, if that. And it makes that very satisfying Marui like thumpy sound. No scratching or grinding, just perfectly clatering thump-Ghatting. The range is superb and the FPS is a nice constant 310-320. It rips on a 3000MAH 7.4 Lipo, emptying the mid caps in a matter of seconds.The only loose bit really is the charging handle from the HK slappin, but it literally just requires a tighten with a thin scredriver down the gas tube.
 
This gun is a bit of a collectors piece. It's tough to find AEGs with the oldschool SEF lower, let alone the trademarked Classic Army B&T model. This is sure to last many many more years. It deserves a better life than sitting in my gun cupboard or being used by a noobie mate at the odd game, it needs some lovin'. I'm moving over to the devilish and cursed side of airsoft and going almost completely GBBR and so it's time for this to provide someone else with endless hours of enjoyment. 
 
PLEASE DON"T COVER IT IN RAILS AND SHITE!! (Joking, I love this oldschool look, but to each their own!!)
 
ACCESSORIES!!!
 
With it I will include:
2x Mid Cap mags (Maybe 3 if I can find it)
1x Long Hi Cap
1x Short double hi cap
FLASHLIGHT HANDGUARD (Yep, you're welcome...)
Standard handguard
HK Rail mount
Rail riser allowing you to mount a small red dot but still use the ironsights.
 
No battery and charger as I'm already muggin' myself off here.
£280 ONO incl postage
SERIOUS OFFERS THOUGH. This is priced to it's quality, it's rarity, and the recent internal tune up as well as the included bits. NO SPLITS
 
 

My old reliable, Gen. 2 E&L AKS-74 with real plum handguards and converted plum mag. Shoots at 0.86j 
Have 6 more midcap mags, plus a side rail and the original wood handguards, also have a black set and pistol grip. 
 
Internally it's wired to deans, has an rhopped stainless steel tightbore, JG Blue HT motor, SHS Steel rack pistol and pistol head. 
 
I've also refinished it to be as close as possible to the real thing, by painting it with 3 coats of satin black paint and baking it in the oven. I've let it weather naturally for the been through the wars look. But I can make it look factory fresh for any buyer. 
 
£280 shipped with tracking from ireland

PJ Spr mod 1 dmr
Set to 450fps on single fire only. Wired to deans and quick change spring
Rotary hop unit with flat hopand nub
460mm 6.02 stainless tightbore barrel
All full metal and nice weight
Comes as see in pic sprayed in woodland camo
Bipod . Scope fake peq box . Shorty p mag mid cap

Make: LCT
Gun/Model: PP-19-01
Accessories: See Below
Condition: Good
FPS: 330
Splits/Swaps/Part Exchange: N/N/N
Price/Payment: 415
Pictures: 

Selling my beloved LCT PP19, I do love this but I'm reducing my collection to fund a new car, I have fully upgraded this externally and it has cost a reasonable amount to do so, please see below the total cost of the package RRP:

LCT PP-19-01 £319
LCT Z Series Suppressor £42
LCT Z Series PT-3 Stock £109
LCT Z Series Rail Extension £15
LCT Z Series RP-1 Charging Handle £8
Replica B10M Handguard £25
Russian 2DPS Flashlight £100
Replica RK-06 £15
Airsoft Artisan Buffer Tube Adapter £54
MRO Replica £45
Spare Mid Caps x4 £56

Total RRP: £808

*Please note the PT-3 stock doesn't fold, it is a LCT stock on an LCT AEG, it was just solid, once I got it closed it didn't want to open again, but if that bothered you, the buffer tube adapter is included so you can swap them over, personally I never needed to fold the stock so it never bothered me.

Also please be aware this is not a light SMG, it weighs around the 5kg mark, which may not seem a lot but when you lug it around all day you feel it, though it turns a lot of heads so it makes up for it. 

I would like £415 All inc Postage and Paypal fees

This was put together by me, nuprol base gun, madbull tbb and guarder clear hop rubber.
Will come with attachments in pic and 1 hicap stanag mag
Fps around 320-330
Good trigger response and range

For sale is my lovely ICS L85/SA80 A2 version AEG, it has been modified to fit the Daniel Defence railed front end/Elcan Spectre Optic which gives it the late A2 appearance.
 
I believe the price I am asking is very fair, as the rifle new is £300, the optic is £100-120 and the rail around £130.  Meaning building something similar new would be around £550.
 
I believe it is running around 320 fps, however cannot be sure as due to lockdown and my job I haven't been able to play since late 2019.
 
Daniel Defence Rail
It has the Daniel Defence rail, I am not sure which brand, however it has been modified to fit.  This fits the weapon rock solid with no movement or play.  It also has some of the sand coloured rail covers and a grip pod.  The grip pod currently works, however keep in mind that the locking mechanism in both the real steel and replica ones eventually wears out, although at current its fine.
 
Due to the rail system its not possible to fit the battery under the top cover, however I have fitted an extension to the battery leads (removable), which allows fitting a lipo in the bottom section of the rail.  I use a zip tie then to prevent the battery slipping out, you can of course use a rail mounted battery box (I didn't do that as I wanted the rifle to look authentic).
 
Elcan Spectre optic
Its a very good replica of an Elcan Spectre optic which includes trades, it has the side mounted lever which toggles between 1X and 4X zoom.  It also has a rotary dial on the side offering either a red or green illuminated reticule.  There is some dark blue paint on the lever and the illumination dial, to aid quick referencing.  The sight also has the top mounted red dot complete with cover.  The replicas of these are around £100-£120 alone.
 
It also comes with;
An optic riser in case you want to raise the optics (this was more common when the ACOG was used) Carry handle and iron sights.  Although I cannot find the bolts for attaching the carry handle. The fake gas parts (plug, cylinder and piston) although the wiring prevents these fitting in. P Mag, again very in keeping with the late A2 issued weapons.  I believe this is around 100 round midcap.  
I will accept paypal and can provide my phone number if you have any questions about the rifle and included accessories.  Am not interested in swaps!
 
If buying please be prepared to provide evidence of UKARA defence.
 

G&P M16 with launcher. Price includes case, battery and charger, mags, mag pouches and grenades. In perfect working order. No modifications. Selling due to downsizing my collection. 

Hi all, 
 
Cracking little gun just over 2 months old. I have given it the worn look and wood stained the hand guard to give it a more realistic look. It’s got a SHS nozzle in it. 
 
Comes with:
 
Sight mount
x3 Midcaps
x 1 Hi-cap
Red dot sight
 
Includes P&P