Hi all

 

So here for sale is my LCT VSS (she's a beauty isn't she?). Selling it due to trying to thin down the collection for when my gf moves in with me.

 

Shoots like a charm and is very silently as it's nicely shimmed with decent range too.

 

All work done by Skunkworks back when he used to be open:

-Around 320 fps

-Wired to deans, 7.4v lipo (no mosfet)

-Short stroked gears if I remember correctly and reshimmed

-Around 320fps on 0.2

-Slightly better than stock motor

-Wires re routed to go under suppresser thread instead of over to avoid getting cut wires

-Polished stock barrel

-Chinese "Vector optics" 4x PSO scope (problems with this explained below).

-4 100 round mid caps which need new springs (don't feed), 1 50 round midcap, 1 300 round high cap in plum.

 

Issues: So as discussed 4 mags don't feed and need new springs, I believe this is due to me overloading the mags previously (woops).

Biggest issue: So the PSO is rusted onto the rifle and the lever to disengage the mount has broken off, meaning the PSO scope is stuck onto the side of the gun. I haven't attempted to remove this with a hammer or through other means as the scope completes the look of the gun. The other issue being that the PSO is wonky and is impossible to completely zero so it is only used for looks (the bbs shoot slightly to the right and above the reticule). 

 

There is a slight solution to the problem of the PSO being stuck on the rifle: You can unscrew the 4 screws you see on the PSO mount which lets you take off the PSO but will leave the mount attached to the dovetail mount on the side of the gun. 

 

Any questions please ask and no time wasters please. Postage and Paypal fees are extra.

 

Cheers!