SSPKali

Spent an afternoon with some four star removing multiple layers the previous owner had applied 🤣 As much as I love a painted rifle the MWS will stay black, I have my G&P aeg for that! Loving the paint you have done though, don't put it down in dead bracken...you will never find it again 😁

TM MWS CQBR with some internal upgrades and external accessories. Stripped off the old paint for a clean look.

So on inspection there was not only the sharp edges of the trigger guard wings but also a hefty burr from a knock it had taken. I cleaned up the burr with some fine wet&dry paper, de-greased the area and then masked it off ready. I used black Sugru to fill the gap and blend into the trigger guard wings and also around the scuffed area. I let it set over night and removed the tape then used a craft knife to tidy up the front where it had overlapped the tape. Feels great and you would not notice it unless you turned the gun over and squinted 😁

I have the same issue, seems the previous owner scuffed it and left a burr on there. Will break out the Sugru later and post some pics too....because I have sod all else to do.

I shoot rifles left handed so pretty much essential! Not a cheap but easy to fit and makes life much easier.

Spent a useful afternoon removing many, many layers of paint from my MWS...and then the 5 mags. Looking much nicer in the dark grey / black and slightly battered look 😁

I have an FRV shooter belt so carrying weight is no problem. What coyote pouches do you have to shift? Happy for you to DM me to keep off this thread.

Slightly odd question but I am after recommendations for magazine pouches to use with the MWS on a belt set up. I alternate between a Viper VX chest rig and a full plate carrier (& weighted plates) with kangaroo M4 pouches at the moment but fancy using my FRV shooter belt for lighter load outs. I think I want a single open pouch and a closed double one (4 mags in total is more than enough for CQB games) What pouches put up with the hefty MWS magazines bouncing about in them? WAS? HSGI? Other?

Fire Support now have MWS magazines back in stock!!! Just ordered my own (taking me up to 6) and there are 59 left....GO!!!

I have found the Eagle6 videos on YouTube handy for general disassembly / reassembly guides: https://www.youtube.com/channel/UCIHcndZaGIOO8l4FVv0JQtQ They have videos on removing the barrel / front end and the hop-up - that should cover most of those questions. NPAS is quite easy, again watch the relevant video and simply replace the stock part when you re-assemble! Other than that YouTube and this thread cover most of it. IIRC there are some pics on here how to mod the selector to single shot only. Oh, and welcome to the club

MWS mags back in stock at Firesupport today 😀

Games Workshop called, they want their Bolt pistol back 😁🤣🤣

Ruger actually based the grip angle of their .22 automatic on the Luger due to the excellent ergonomics.

I fitted the AngryGun one as I shoot left handed as well, was a pretty simple job and seems to work fine. There are some good vids on YouTube showing how to do it. Eagle6 is my go-to. I also added a larger bolt release so I can manipulate it with my left hand after putting a fresh mag in with my right.

@wo1f can I ask what Propane adaptor you are using? Any changes to the mag fill valves? TIA

Glad it isn't just me! I think I will return the Laylax valves for a refund then. Glad I have not invested in a 6kg propane cylinder to re-fill from! So, where does Abbey gas in bulk? I am in Gloucester but play in Bristol and Birmingham....would be good to grab a box of 12 cans at a discount!

I have ordered some 9Ball fill valves to give them a go. Failing that I will get a genuine Madbull propane adaptor. ....or just buy shares in Nuprol Green Gas!!!

Soooo I have major issues trying to fill my MWS mags with Propane (and to a lesser extent my MP7 mags too!) Using regular cans of Nuprol green and red gas is no issue, they fill fine and only spray a little liquid when full. I have a Madbull-type adaptor for my Coleman propane and it tends to get a little in the mag but mainly spray liquid propane over my hands. I purchased the Airsoft Innovations adaptor and have tried that without the extra adaptor (fail) and with (slightly better but still more into the atmosphere than the mag!) I fitted one of the Lees Precision silent fill o-rings (please don't derail, I know the TM thinking behind the valves) and it silently fills with Nuprol gas...but still pisses propane out of the two adaptors! Do I have a dodgy Coleman tank? Are these adaptors inherently hit-or-miss? Is there an issue with the fill valves on the mags? Please, any advice is very welcome!

Use some low strength threadlock and it should adjust ok, but not vibrate loose.

I have been using the Vortex on my G&P and Cyma AK74 for a while, got used to both eyes open!

Hi all, At last I have managed to register for the forum and stop lurking reading all 90+ pages of (mainly) wisdom. A big thanks to BadaBing / Wolf, @ATRG_ and Stu (@BeefyMilsim) for getting me hooked on the MWS platform and Beefy for selling me his CQBR I am yet to field it due to a torn knee ligament but I have had fun tweaking it and making it ready. As I run a G&P M4 AEG I knew what lay out I wanted and it is almost there (my wallet can breathe a sigh of relief now!) Magpul pistol grip (ERG? Too many TLAs in their product range!) Magpul AFG Ladder RIS covers DP light weight bolt RA Tech NPAS (Silver one, needed some fettling to fit) DP nozzle spring set DP Nozzle seal cup Modify Tan and Laylax hop arm (already fitted when I got it) Ambi safety (I shoot left handed as my right eye is Mr Magoo standard!) Magpul grips on mags (5 so far, I am not too trigger happy!) On Order: Extended mag release Extended bolt release (again, for lefty use) Angry Gun Speed Buffer weight Angry Gun nozzle with MPA PTS QD sling plate I then have the parts to re-build the original BCG as a spare. Not sure I need a spare but for weekenders / milsim I would be happy to throw it in the case. Topped off with Vortex red dot and PEQ / Olight Valkyrie for light and "lazers" I might try and find a way to cram the X301 tracer into the can, that might be a good weekend project! Only other possible upgrade is a Magpul CTR stock but I am finding the current one ok. Good news is the knee is almost healed so I can play again and try to get some fitness back!