Grey
-
Posts
27 -
Joined
-
Last visited
-
Feedback
0%
Reputation Activity
-
Grey got a reaction from Floperator in TM 416D Died! **NOW FIXED**
It LIVES!
So just to close this off - after taking it apart a couple of times and testing where everything worked, everytime I reassembled and tested it didnt work.
In the end I gave in and dropped it to Wolf Armouries.
The tech initially had the same issue as I did with parts working when disassembled and then not working when assembled. He finally traced the fault to a tiny bit of corrosion on the motor that the initial drop must have dislodged.
I'm happy to have the gun back - working and serviced with new lipo connections and happy with the service I recived from Wolf.
-
Grey got a reaction from Emergencychimps in TM 416D Died! **NOW FIXED**
Nope! Not only that, I snapped the solder connection on the buffer tube!
Theres a chance its not working because of the connection so I'll probably send it to a shop now.
I did disassemble again so will look to carefully put it back together and try to solder and see how I get on.
I'll keep the thread updated to completion just in case someone else ever has this issue.
-
Grey reacted to Emergencychimps in TM 416D Died! **NOW FIXED**
My suggestion at this point would be to stop, connect the motor up, attach a battery and "pull" the trigger (move the bit to simulate a trigger pull). Does it turn the motor?
If not you have a break in the circuit and that is what needs sorting.
Also, make a not of any shims, where they are etc so you can replace them exactly when reassembling.
When I reassemble I have the piston forward. assuming it's not caught on the gears it'll go forward when you add the spring anyway.
Also, I'd check the lever thing is moving up and down freely at the back.
-
Grey got a reaction from Nick G in TM 416D Died! **NOW FIXED**
Yes you’re right. I tested with a mag that allows this gun to dry fire.
Maybe the bolt stop feature is something to look at 👍
Yes, motor was connected up with both wires. This gun has a Lipo mod and can run two batteries.
I’m going to try and connect the motor to another battery out of the gun to make sure.
Unfortunately I don’t have another motor to test.
-
Grey got a reaction from Emergencychimps in TM 416D Died! **NOW FIXED**
Yes you’re right. I tested with a mag that allows this gun to dry fire.
Maybe the bolt stop feature is something to look at 👍
Yes, motor was connected up with both wires. This gun has a Lipo mod and can run two batteries.
I’m going to try and connect the motor to another battery out of the gun to make sure.
Unfortunately I don’t have another motor to test.
-
Grey reacted to Prisce in What are you driving?
Got me a new rig last week. It was factory built, have a few little mods I’m doing to it.
-
-
-
-
Grey reacted to Prisce in What are you driving?
Landrover Master Race
Heres one of my others too!
Also have a Disco 3.... and people think Airsoft is expensive.
-
Grey reacted to CES_williamson in What are you driving?
Second land rover i have owned, this one is a 2006 Land Rover Defender 90 Black Edition hard top. 2.5 TD5 (and yes the insurance is astronomical since i am 18! )
-
-
-
Grey reacted to Enid_Puceflange in What are you driving?
Perfect for getting to the hard to access sites 👍