Daveoc33
-
Posts
320 -
Joined
-
Last visited
-
Days Won
1 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Daveoc33
-
Time Left: 6 days and 7 hours
- For sale
- Used
This is my cyma electric blowback ak in real wood and metal. It comes with 2 hi caps and 1 mid cap magazine. Fps is very close on 0.2g bbs at 349fps. On 0.28 it's at 275fps so 0.98 joules. I wouldn't run it on 0.2g bbs. Its just too close to the limit. This used to be 2 tone where the wooden furniture was blue. The furniture has been cleared of the blue, sanded, and restrained in oak. Shoots really nicely and the ebb gives a gentle nudge when shooting. Sad to see to go but I've bought something else so this has to go. I'm after £150 including postage. You need ukara or defence to buy this please.£150
- GB
-
Time Left: 6 days and 6 hours
- For sale
- As new
This is my sig p365. This is the co2 proforce version (not the vfc version). A bit of an impulse buy on my part. It's a very snappy shooter. After a few shots it settles at 275 fps on 0.25g bbs. That puts it at 307fps on 0.2. It's a fixed hop but it's very happy hopping 0.25g bbs. I've owned this from new and it's had 1 mag through it and them put back in the box. The only issue I've had with it is where I inserted the mag when the pistol is uncocked and the valve knocker put pressure on the release valve and it would vent gas. If you cock it forst and then insert the mag it doesn't do this anymore. New these are £120. I'm after £75 including postage.£75
- GB
-
FML there are some deals at zero one at the moment. Wave goodbye to your hard earned cash! Apologies to anyone trying to sell TM stuff in the classifieds at the moment... TM mws for £369.99 TM hi capa DOR £99.99 Loads of other tm pistols and ngrs discounted as well. https://www.zerooneairsoft.com/products/Tokyo-Marui-GBB-M4-MWS https://www.zerooneairsoft.com/products/Tokyo-Marui-GBB-Hi-Capa-DOR
-
Finally we can all complete our Gloria from lock stock and two smoking barrels loadout! 😎
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
TM hi capa with a shuey custom metal slide a pdi 6.01 barrel and what looks like a purple prommy hop rubber. The trigger is also aftermarket but I'm not sure what it is. Really crisp action on this. Comes with 2 gas tight TM mags and a hard case. You need a valid defence to buy this please. £135 including postage.£135
-
This advert is COMPLETED!
- For sale
- Used
This is a kwa usp 45. It has some scratches to the slide but nothing too major. Works and shoots fine. Comes with box and 2 mags. I don't have the hop up adjustment tool but you can use a flathead screwdriver for this. The hop up is set for 0.25 currently and fps is 290fps on 0.2g bbs with green gas. I'm after £95 with 2 mags or can do £85 if you just want 1 mag. Price includes postage and fees.£95
- GB
-
Problems uploading photos and general forum issues.
Daveoc33 replied to mightyjebus's topic in Forum Feedback
Thank you for fixing the website @proffrink 👍 very much appreciated! -
I've never used them but there are mail forwarding services who's whole business model is this scenario. You'd have to check T&C that they don't restict what you want to buy. Eg. https://www.stackry.com
-
This advert is COMPLETED!
- For sale
- Used
This is my g&g Gtp9 pistol. It comes with 1 leak free mag and is in OK condition. I listed this about a month or so on here, and it was fine then. But retesting it now it shoots very well for 5-10 shots then it gasses out. It didn't do this before. When it does shoot the hop up is excellent (it has a g&g rubber in it). I'm after £45 posted for this.£45
- GB
-
This advert is COMPLETED!
- For sale
- As new
Single shot pump action shotgun made from metal and wood. Never been fielded, only shot in the garden and I've owned it from new. It's got a tdc hop which is currently set for 0.43g bbs and it's chronoing at 234fps on 0.43s which puts it at 1.09 joules. If you use lighter bbs it'll go over the joule limit. You need a valid defence to buy this please. I'm after £75 including postage.£75
- GB
-
This advert is COMPLETED!
- For sale
- Used
G&G Cm16 with a few upgrades that does semi on full auto. This isn't intentional. It used to do full auto and did for a moment when I tested it but it looks like the selector plate needs replacing or looking at. This is kind of a bits box build. The intention was to make a lightweight m4 that was good power and accurate. It's quite long and is all polymer so weight 2.2kg. I really like it but I like other guns more so this one is having to go. Its got a king arms club foot stick. There's no end cap for the stock so the battery is just in there loose. I squeeze a small bit of sponge in there to stop the battery from falling out. It's a cm16 v1 polymer lower with a combat machine v2 upper with a g&g m-lok handguard. G&G gearbox. It has a generic silencer and generic red dot. It has a 500mm (approx) madbul tightbore barrel, maple leaf macaron hop rubber and g&g hop unit. It comes with a d boys high cap that I've checked feeds fine. It shoots well at approx 325fps on 0.2g bbs. You need a valid defence to buy this please. I'm after £90 plus £10 postage for rifle mag and red dot.£90
- GB
-
I'm not getting email notifications when I get a private message again. Is this just me or has this problem resurfaced?
-
Time Left: 2 days and 4 hours
- For sale
- Used
WE glock tan lower. The hammer unit in this is faulty. The hammer doesn't stay clocked when the slide is racked. The rest of it is fine but beware of this hammer unit. £25 posted.£25
- GB
-
Time Left: 2 days and 4 hours
- For sale
- Used
Asg Aug (it's a trademarked JG Aug) suffering from low fps shooting at 260fps on 0.2g bbs. It's missing the button to remove the barrel but you can still operate this with a screwdriver. It's also missing the fake silver gas block end and it has an incorrect flash hider. The foregrip is also wobbly. Externally it's pretty good but the barrel has some wear on it. The optics are good and it shoots on semi and full fine. It's just low fps. It has a new maple leaf macaron hop rubber and hard nub. It comes with 3x midcaps and 1x high cap. I do think this is a fixable RIF, if you can just get the fps up you'll be fine. You need a valid defence to buy this please. I'm after £65 plus £10 postage if you need it posting.£65
- GB
-
This advert is COMPLETED!
- For sale
- Used
Good condition replica aimpoint compM2 with trades on the sight and covers etc. Works fine. £35 including postage£35
-
Thank you. Regarding the g3, have LCT addressed the feeding issues in their mid caps detailed here (scroll down to the bit titled "the mid cap magazines") And do you have a release date for the mp5?
-
Please could you make some psg1 furniture for your g3 series?
-
This advert is COMPLETED!
- For sale
- Used
This is my g&g umg. It comes with 1 high cap mag and qd suppressor. It's in reasonable condition overall. It's missing the side picatinny rails and the lower rail looks like it was drilled to fit. Wired to mini tamiya and shooting around 315fps on 0.2g bbs. It cycles fine but perhaps a bit noisy like a lot of g&gs are. I want to like this gun but I prefer my mp5s so this one won't get used so it's up for sale here. £100 all in£100
- GB
-
This advert is COMPLETED!
- For sale
- Used
This is a boneyard g&g m14 that I originally got as a box of bits. This was originally listed with a broken motor cage and no mag. It now has a new motor cage fitted and it comes with a mag. However it's double feeding and it's still missing the front sight sixmm.com have a cyma front sight in stock that may fit. The externals are in very good condition. Feel free to ask questions. I'm after £80 including postage and fees You need ukara or valid defence to buy this please.£80
-
@Johnboy is this m14 any good to you? -
We've already had a short chat about that and I'm not sure we'll find a price we're both happy with. Just saw this thread now and I can see why you're not keen on buying a whole boneyard m14 for the sake of one part. This is going to sound horrible but you can use a purple plunger from a calpol tube cut to size to repair an airsoft feed tube. I've done it once on a proprietary hop unit. It wasn't pretty but it worked. The part is already broken so you've nothing to lose by trying.
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Starting from top to bottom. Asg cz p09 green gas newish, used once SOLD WE glock 17 green gas sold Kjw hi capa green gas £10 Nuprol raven G17 co2 sold Nuprol raven G17 extemded co2 £18 Nuprol raven G17 co2 sold Kjw hi capa green gas no base plate £9 Kjw hi capa co2 £10 Kjw hi capa co2 £10 WE M9 chrome leaky £8 Postage £3£15
- GB
-
Landwarriorairsoft.com have £15 off orders of £100 or more. Valid until the end of Monday Use code HANSHOTFIRST to get £15 off your order of £100 or more
-
I understood that the gen 1 is fixed hop with a hop patch (not a full hop rubber) and gen 2 is adjustable hop. See here. Gen 2 has a hop wheel. Gen 1: Gen 2:
