sjhirst
-
Posts
285 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by sjhirst
-
This advert is COMPLETED!
- For sale
- As new
HI, I made two of these, so have this hpa tapped one going spare. fed from a 470 hi cap, these were tried and tested at my local site the other day, and worked perfectly. Two straps also help keep the mags together- I dont trust those mag lugs!! £75 posted. Thanks£75
- GB
-
This advert is COMPLETED!
- For sale
- As new
HI, I made two of these, so have this hpa tapped one going spare. fed from a 470 hi cap, these were tried and tested at my local site the other day, and worked perfectly. Two straps also help keep the mags together- I dont trust those mag lugs!! £75 posted. Thanks£75
- GB
-
You most likely have looked at this already, but check the regulator on the Tippmann. If it is set too low, it will also do as you described, from what i remember!
-
This advert is COMPLETED!
- For sale
- Used
Hi, This has been sitting in the cupboard for a good while now! Used condition as youd expect, but all working perfectly. Price includes paypal and postage (what would be best postage?? lol ) Thanks£55
-
This advert is COMPLETED!
- For sale
- Used
Just recently sold my gbbr to fund another hobby, so had this as a backup.it's a few months old and has been used in a few games. Includes another mid-cap, though it is the wrong-looking type as extreme airsoft sent me the wrong one. A nice aeg, but it just doesn't float my boat No major blemishes etc, just the usual ak scratch from the fire selector. £220 paypal and posted. Thanks£220
- GB
-
This advert is COMPLETED!
- For sale
- Used
Hi, I'm putting my we ak up for sale, as i need to put funds towards my other hobby (need a new laser module) Externally ive changed the handguards to a cyma keymod one. Took a bit of modifying but sits nicely, the only thing i never get round to was gluing or bolting the upper to the lower. Its not a problem but you can move it upwards. Its a friction fit so hasn't been an issue The grip has been replaced with a fab defense one. I also fitted a 5KU buffer adaptor recently. It does wobble a bit, but that didn't bother me, and there is the original stock to fit back on. There is a dtk type muzzle brake on the end, as the original red plastic one went in the bin! Internally, it has the RA Tech Recoil buffer kit and dynamic spring system- I ended up preferring the full travel though! There is a maple leaf yellow hop rubber and RA Tech precision barrel. I use hpa a lot and make my own adapted mags, so this will include two dual mag set ups. Use one for hpa and the other for gas if you want! If i remember correctly, this thing fired hot for our 1 joule limit! This gets used maybe twice a month, so over the year its been faultless. It has the usual wear marks, but nothing drastic or detrimental to its use. Price includes paypal and postage (pf48)£440
- GB
-
This advert is COMPLETED!
- For sale
- Used
2 x gas mags for the p90 for sale. Long story, but given up with this thing! so have these going spare. Minor wear on the mags. £60 includes postage but not paypal fees. Thanks£60
- GB
-
This advert is COMPLETED!
- For sale
- Used
I found another gas mag so have converted it to hpa. Therefore i have my tried and trusted original dual mag for sale. The base plate is missing from the bottom of the gas mag (ordered one from kyairsoft, but got sent the wrong one) but is held in with a bracket anyway, and there is a square cut out on the mag shell - it was originally for a hpa valve, but i found that just adding a tap to the gas port was a more reliable way to go. This has served me well on my AK74SU when i get the chance to get out! It's all held together with my own 3d printed mag clamp, as it takes the mags spines into account, and is really solid and secure. Looks a bit rough but has stood up to under a years worth of use! Price includes postage and paypal fees. Thanks£75
- GB
-
a lfs restrictor disc would bring it down, but im not sure on your site limits? the blue 20% one, or an npas. Either way, if you dont want to go the diy route, give me a shout as i have both going spare. The p90 hated the npas and the restrictor disc was too big to get a decent bolt cycle, so i lasered my own disc!
-
This advert is COMPLETED!
- For sale
- As new
Hi, These have been sat in my cupboard for a good while! The AOW is a lovely little shotgun and has been barely used- it has the usual marks on the cocking levers but thats about it! This will over hop on a 3 round burst out to a good distance, but on 6 will reach out with a flat trajectory. Seeing as its a cqb shottie its not a big deal, but thought i'd mention it! The M870 seems unable to feed the shells in. It was a hpa'd one with a drum mag. If i cock the gun back, i can feed the bb's in and it will fire, so something minor feeding wise i hope. Also missing the latch. Hence its marked as spares/repair The grips are interchangeable so you can swap the aow from gas to hpa if you wanted to. These also include 9 shells and the original bag of bbs...wow!!! lol price includes postage (pf48) i have a bigger box to put them both in sop will hopefully be ok. buyer to add paypal fees if paying via that method. Thanks£130
-
I know you're asking for a tech, but how confident would you feel doing it yourself if needed? I had the SD version and its very easy to work on. One pin holds the hop unit and barrel in, and then it all slides out of the guns receiver. The unit itself is easier than some to work on aswell.
-
yeah, i usually get my stuff from them quicker than some uk sites.
-
Powair6 currently have them in stock if you're still looking?
-
Bought a p90 the other week and got to field it. I hpa converted it as i heard the mags were pretty bad to use with gas- they were right lol. Other than the mags, this is a superb smg. So manoeuvrable and even with only .25 bb's it was spot on.
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
HI, For the life of me, i cant find an advert i saw for various spare parts for the we p90 So, putting out a request! ThanksNO VALUE SPECIFIED
-
I think the g36 will be my next purchase. I've a p90 on the way, so better ease off the wallet for a while!
-
Just to throw one into the mix. You could always go GBB with a hpa adapter. Good all year round then.
-
Sorry, I cant help you with that problem, but there is a tm mp5 mgrs section in the guns, gear and loadouts subforum. Might be worth posting in there as well?
-
This advert is COMPLETED!
- For sale
- Used
Hi, The mp7 has been sold, so have these spare. They are hpa tapped with a wider hole on the base plate for the hpa line to fit. Can be reverted back to gas if needed. Price includes delivery. PayPal fees to be added. Thanks£55
- GB
-
Tm mp7 gbb-hpa angel customs drum mag adapter
sjhirst replied to beanyweanywoo's topic in High Pressure Air
It looks like Airtac have currently sold out of theirs, but it might be worth giving them a shout? They are pretty responsive on Facebook etc. -
This advert is COMPLETED!
- For sale
- Used
Hi, As much as I love this little smg (having just purchased the drum mag for it) I find myself coming back to the AK I just find it an easier platform to aim and work with. We have the mp7 itself with standard flash hider that will be fitted back on. 2 mags- hpa tapped with an extra wide hole at the bottom for the line, but can be converted back to gas. plus the drum mag ( with the third mag being one for the donor parts) mp7 probably used 2 or 3 times in the field. I can include a regulator and line if needed for an additional £80 Price includes postage but not paypal fees. Thanks Open to sensible offers as ive just spotted a bargain elsewhere! Can be split: mp7 and 2 mags: £295 hpa drum mag : £150 (its brand new more or less)£425
- GB
-
Yep, its a shame. I regularly sold my mp5 handguards on there, then they were removed. Apparently because they will fit the real firearm they are not allowed.
-
This advert is COMPLETED!
- Swap only
- Used
Hi, As much as I love this little smg (having just purchased the drum mag for it) I find myself coming back to the AK I just find it an easier platform to aim and work with. So, putting it out there for any potential swaps. We have the mp7 itself with standard flash hider that will be fitted back on. 2 mags- hpa tapped with an extra wide hole at the bottom for the line, but can be converted back to gas. plus the drum mag ( with the third mag being one for the donor parts) mp7 probably used 2 or 3 times in the field. I can include a regulator and line if needed. MOVING TO FOR SALE SECTION-£0.01
- GB
-
You need a slide check by the sounds of it : https://www.highpressureairsoft.co.uk/ninja-slide-check You can buy a line with it already on if needed. https://www.justpaintball.co.uk/products/v-tac-remote-line-with-slide-check
-
Hi folks. Just to say I can vouch for the seller. (Brother)
