All Activity
- Past hour
-
-
HZR13 reacted to a post in a topic: Gun picture thread
-
-
TM AK102 NGRS. Bought 2nd hand and thought I'd gotten a bit of a deal but turns out the previous tech work was very damaging. It looks like the original problem was the little nub that allows safe, semi, full auto had snapped but instead of fixing or fitting a new nub the tech had modified the selector plate, cut a new full auto slot in the receiver, removed the plate that stops the trigger from moving on safe and fitted the worlds biggest fuse holder under the front handguard. cue designing and printing a new safety plate, drilling and pinning a new nub into place, fitting a eagle6 AK selector and adding a leviathan, filling in the new selector marking with JB weld and then sanding and painting the receiver. Since I had it in bits I fitted a steel stock catch (TM one has a habit of breaking if you drop the AEG), heavily modified a lower foregrip to fit the NGRS (much drilling, sanding, grinding and then painting). Also fitted a mock Bulgarian flash hider as it came with the AK105 bell flash hider and not the TM AK102 one. It came with a upgraded inner barrel, gears and spring and is sitting nicely at 340 on a .2
-
Any help welcome and appreciated on this one. Just completed (well, assembled) a new HPA build using an Inferno Gen2 on my boneyard Specna M4. I’m getting inconsistent output shot to shot. On semi, each shot is very weak with an audibly weak output (think mouse fart), often failing to fire completely or posting very low sub 100 fps. On quick double taps of semi, the second shot is much stronger. And on full auto, output is audibly more consistent shot to shot. Have tried output pressure between 90-110psi with no observable change in behaviour. Reg pressure gauge cycles as expected with each shot. Splitting the lower shows it’s nothing barrel or hop related. Will post a vid to demonstrate shortly. https://youtube.com/shorts/Rv-CdfinMqk?si=EQp79Y1U4V8hxUiB
-
MW Airsoft Shipping joined the community
-
HZR13 reacted to a post in a topic: Pricing LCT rifles that take up way too much space
-
Tackle reacted to a post in a topic: Pricing LCT rifles that take up way too much space
-
Tackle reacted to a post in a topic: Pricing LCT rifles that take up way too much space
-
So wtf was that about ?, is he marketing other people's kit for them & adding a big lump for himself ?
-
Tackle reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
Tackle reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
Pricing LCT rifles that take up way too much space
Enid_Puceflange replied to Johndaniel4863's topic in Appraisals
There is low balling, then there is sub cretaceous 😂 -
I always say patience is a virtue and if it's for you it won't go past you
-
Enid_Puceflange reacted to a post in a topic: Pricing LCT rifles that take up way too much space
-
HZR13 reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
Macks airsoft dreamers of the week thread
Enid_Puceflange replied to Mack's topic in General Discussion
Been there with that seller… I was bursting to get a GHK sg553 a couple of years ago, and he had one Priced at not much less than retail I just couldn’t give him my money, but patience paid off I got the very gun he was selling then, a month later , from one of his “mates” at £150 cheaper -
HZR13 reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
Enid_Puceflange reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
"But I saw it on Joe Bloggs Airsoft for £150!"
- Today
-
Pricing LCT rifles that take up way too much space
HZR13 replied to Johndaniel4863's topic in Appraisals
I liked this old post, never noticed date...🤣 -
Pricing LCT rifles that take up way too much space
Lee Shangfeng replied to Johndaniel4863's topic in Appraisals
Sorry about the lowball in advance. Would you sell either gun for £100 without the magazine? -
KABAR Rubber Knife that doesn't look like a toy?
Hatchet replied to Austeyr's topic in Guns, Gear & Loadouts
Link above for the repro one looks good. Worth checking your site rules as I've been places where cold steel type rigid knives aren't allowed to be used for melee kills and only bendy rubber types are (assuming your site even allows knife/melee kills, some don't.). The other option if you're only using it for looks and not drawing it is just to get a sheath and a Kabar handle. -
I've seen mosfets die or go on the fritz in heavy rain as they're a bit more exposed than normal AEG electronics, but normal AEG electronics are pretty good in the rain. If there are torrential downpours you may get some issues, but in general you'll be fine
-
KABAR Rubber Knife that doesn't look like a toy?
Enid_Puceflange replied to Austeyr's topic in Guns, Gear & Loadouts
I want a foam breaching hammer ! -
Lilltlegs joined the community
- Yesterday
-
Macks airsoft dreamers of the week thread
Punisher3990 replied to Mack's topic in General Discussion
Tokyo Marui Curve stealth pistol mint condition with spare mag - £125 https://www.usedairsoft.co.uk/rif-s/gas-powered_1/tokyo-marui-curve-stealth-pistol-mint-condition-with-spare-mag_i86837 Brand New on AirSoftWorld - £72 ASW - £72 -
It's so he can point to it as proof to the Mrs that has selling it all up but just...no one is biting.
-
Time Left: 6 days and 13 hours
- FOR SALE
- USED
1. RIS front rail for Magpul PTS Masada. This will NOT for the A&K version without modification. £50 collected £55 posted 2. 10 inch / 25cm long over barrel quick release suppressor with adaptor. £35 collected £40 posted 3. Very short clone quick release Surefire suppressor £15 collected £20 posted 4. Basic CCW suppressor. Just the tube. No guts to it. £10 collected £15 posted10.00 GBP
Aldershot
-
Time Left: 6 days and 12 hours
- SALE OR SWAP
- USED
I don't play anymore but I still get itchy fingers to mess about with guns while watching TV or whatever. Bored with this one now so just seeing if anyone wanted to trade for something for me to pointlessly spend money on to upgrade. GBB pistols with upgrade potential or Spring BAR'S ideally as I never was very good with a soldering iron. AAP01 Mini mamba upper CTM 22/45 Lower Real 1911 grips (modded a little for the mag release) Cheap shitty suppressor Ghost ring sights Waldo springs Cow cow enhanced nozzel / piston head 5ku lightweight bolt Cow cow trigger CTM cocking handle 5KU grey Nozzel return spring retainer bit (forget the name) Maple leaf bucking Inner barrel and hammer are stock got bored before i got round to them. Believe I still have all the original gubbins so can inclued those if needed. Swap would be ideal or £250 inc postage and fees250.00 GBP
Addlestone - GB
-
charlieford4 joined the community
-
-
Time Left: 6 days and 12 hours
- FOR SALE
- USED
Crye Precision Field set G3 field trouser and combat shirt trousers 36s, shirt, lrg R. £160 plus post for set , or sold separately £70 and 105 for shit and trousers (plus post) WAS RPC SIZE ML, wit extras, triple m4 panel, drop pouch, free mechanix gloves, grenade pouch £115 all in back panel - assulaters style £15 plus post (£4) postage is £4, buyer to pay PayPal fees helmet and coms set up - as seen includes helmet, lights, cover, baofeng Uv5r flexible aerial, padding, coms kit Ptt, headset - all working and decent £85 plus postage and fees offers for multiple purchases drop me a message to chat115.00 GBP
- GB
-
mancmewtwo joined the community
-
-
Time Left: 6 days and 11 hours
- FOR SALE
- USED
Really don't want to be selling this, but needs must. TM PSG-1 - NEEDS WORK. This gun works fine when stripped and bench testing, so nothing dreadful. When back together, it has a dead trigger. It needs either a selector plate or trigger switch.... and a rear pin (see second photo) It has a brand new motor (what i was told was the problem) and a brand new Guarder piston fitted. Original motor and spare piston included. It even has a service receipt from Fire-Support dated Jan 2017 £200 collected £215 posted200.00 GBP
Aldershot - GB
-
Aiden Chen left Positive feedback for olleytom4
-
olleytom4 left Positive feedback for Aiden Chen
-
Time Left: 6 days and 11 hours
- FOR SALE
- USED
1. LEAPERS 4-16x50 A hefty size scope with great eye relief. Seen some use over the years but still fully functional with plenty of years left to serve. £100 collected £110 delivered 2. CLONE Eotech VUDU 1 - 6 LPVO on a CLONE Geissele mount. £100 collected £110 delivered 3. West Hunter 1.2 - 6 LPVO £60 collected £70 delivered 4. VICTOPTICS 4x32 ACOG style £50 collected £60 delivered50.00 GBP
Aldershot
-
-