Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. Time Left: 6 days and 23 hours

    • Wanted
    • Used or as new

    FCW TM Saiga 12K Shotgun Short Barrel FCW TM Saiga 12K Shotgun 10" M Lok Rail Handguard Set 5KU SAIGA 12 / SAIGA 12 SBS Blaster Tracer B-13 Style Scope Mount [for Marui Saiga-12K Airsoft] [GBTM12K005] [Black]

    £12,345

    - GB

  3. Time Left: 6 days and 23 hours

    • For sale
    • Used

    A good condition tm akm. Internally has minimal wear. The gun has a Prometheus 9ball purple bucking and bavtac nub bridge thingy. Previous owner has also added an extra spring section to the recoil spring which has increased the rate of fire equivalent to a 130% recoil spring. Is otherwise stock. Externally has a real power steel kit fitted with a small amount of material ground away to prevent rubbing on the bolt. It otherwise fits perfectly and does not affect function. The rear sight has been replaced with a picatinny mount but the original steel rearsight is included. Has the original plastic handguard on it, a 5ku zenitco stock and an dtk2 muzzle break. Original body is included as well. Comes with 6 gas tight magazines King arms gp30 has some external damage. The nub that acts as a stop for the bottom of the sight assembly is broken. This does not affect function. The frontsight has also snapped off. The firing mechanism works as it should and it retains shells as it should. The mounts included are 3d printed. The retaining catch on the front one has snapped so it will need remaking or replacing.

    £850

  4. Today
  5. Time Left: 6 days and 22 hours

    • For sale or swap
    • As new

    G&G MXC9 with 5x mags (2x low caps, 2x mid caps and 1x high cap). Upgraded perun g&g etu mosfet. Zombie night / sci-fi custom paint job and internal led light strip. Truly unique. Mag pouches included. Message for further details. pick up from North Bristol area. Can be seen working. Postage available

    £350

  6. Time Left: 6 days and 22 hours

    • For sale
    • As new

    Custom build based on the ICS Mars2 featuring upgraded internals (master mods piston and nozzle, madbull tight bore barrel, 16:1 gear set, high speed motor) ICS split gearbox, Perun V2 Hybrid mostfet with Clicker. Amazing Aeg but just not being used due to hpa projects. Note: sight not included. Message for further details. Pick up from North Bristol area. Can be seen working. Postage available

    £350

    Bristol, Avon - GB

  7. Time Left: 6 days and 22 hours

    • For sale
    • Used

    Used but in good, fully working condition. From my research, I believe this LCT started life as an AIM Carbine NV. It has however gone through quite a face-lift. Comes with everything pictured including: - LCT AK RIF - 2 High-Capacity Magazines - Suppressor - Muzzle Brake - LCT TX-1 Rail Handguard - LCT TX-4 Side Mount Rail - Repro (I believe) Magpul ZHUKOV-S Folding Stock - Handgrip - Laser - Foregrip - Case (repurposed tool case) -(if wanted) - A brand new 7.4v LiPo Battery -(if wanted) - I can also throw in a brand new LCT PK-218 rear rail (pictured) for an additional £10. This fits where the rear sights would normally go and is standard picatinny/RIS so most red dots/sights will fit. I bought this from the forums a long time ago, intended as a gift for a friend. I don't know much about the work that's been done to it. All I do know is that it all works and functions exactly as it should, and has some cool extras with it. Whilst the house was being redecorated, this rifle (along with all my other RIFs, gear, etc) was boxed up and put in the loft for a year or so. I have since moved house 2 years ago and my collection still hasn't seen the light of day. It's gutting to see them all go but I'd rather someone else made good use of them and enjoyed them like I once did. Open to offers & negotiation. Can post at buyers expense. Please take a look at my other listings (more to come over the next few days) if you want any accessories, bundle deals, etc too.

    £200

    Berkhamsted, Hertfordshire - GB

  8. Time Left: 6 days and 22 hours

    • Wanted
    • Used or as new

    Hi I’m after functioning sear or whole assembly for hi capa. One on the pic is not locking anymore.

    £123

  9. Currently have a SAI branded G34 and a G18C stuck in customs-hell but I'll post them here when they arrive and show how they are in person, fingers-crossed they're good [and have the trades!]
  10. Time Left: 6 days and 21 hours

    • For sale
    • Used

    Never used. Leak free mag 50 posted

    £50

    - GB

  11. Time Left: 6 days and 21 hours

    • For sale
    • As new

    KKM Precision titanium heat treat colouring Guns modify 14mm CCW barrel STEEL £43.55 ZEV aluminium threaded barrel £22 Postage £3.99 tracked

    £22

  12. Time Left: 6 days and 21 hours

    • For sale
    • Used

    no idea what brand, for m1911s £24 posted for both, buyer cover pp fees

    £24

  13. Time Left: 6 days and 21 hours

    • For sale
    • Used

    Make: Tokyo Marui Gun/Model: M4 MWS CQBR GBB Accessories: 1 leak free magazine, Z-Parts steel outer barrel, replica Knights Armament suppressor, original Knights style foregrip (not pictured) Condition: Used FPS: Gas and temp dependent. Splits/Swaps/Part Exchange: N/N/N Price/Payment: £380 posted Pictures: Attached The Z-Parts barrel is thicker at the receiver end than the original barrel, therefore I have had to file the inside of the upper and lower rail sections in order for them to fit. As can be seen in the photos, although the lower rail section fits into the delta ring, it is not fully seated, but using cable ties or tape for cable management will ensure the lower section does not come off.

    £380

  14. Set of Real Steel Hogue grips for the Desert Warrior to make the pistol a touch sexier and make it look less like an overload of beige.
  15. Well he could, if he was in fact a retailer 👀
  16. This advert is COMPLETED!

    • For sale
    • Used

    An old DMR based on the Specna Armas M4. Just needs some TLC to sort the fps that's only firing at 150 with the 1 mag I have left. Unfortunately I just don't have the time to do it. Comes with a verity of springs to try, has quick change spring system. Hasn't been used in a few years so time to sell. Has Upgraded internals feat Rocket piston set , nozzle , prom my purple jpp & rubber + SHS HT motor. Potentially more but it was a while ago since building it. Madbul Barrel runs full length of silencer. Scope & bipod works as should. PEQ box only a dummy box / battery box, Charging handle missing £100 posted. More than likely that in parts alone.

    £100

  17. cropzy

    Specna M4

    Time Left: 6 days and 20 hours

    • For sale
    • Used

    Awesome beginners package. Specna Rock River Arms M4. Midwest industries rail. Maple leaf bucking. Surefire clone torch. Emerson sling. Wired to deans. 2 hicaps 2 midcaps. Gearbox hasn't been opened so it's internally stock. Perfect working order. I used this after I got a new hobby for the odd skirmish, but this hobby has now fully taken over and I no longer Airsoft. A couple of marks here and there. Stock isn't the best condition.£120 posted OBO

    £120

  18. I'm looking to sell my old bolt action rifle, but have been away from airsoft for 10+ years so I'm a little hazy on exactly what upgrades went into it. Internals are compatible with Type 96 parts and I know it has an upgraded CNC hop-up chamber which fits AEG barrels, but unsure on the manufacturer. It also has a 6.01 tightbore barrel, but again I can't remember the manufacturer after all these years. The spring was upgraded and I have a feeling some other internals too (piston head, spring guide?) but can't say for sure and it's not really apparent from looking at them - so for the purposes of pricing should be excluded. Barrel cap has been replaced with a threaded one, but doesn't currently have a silencer fitted. Front bolt to secure the barrel to the stock is loose and tricky to align, so I usually just wrap with electrical or sniper tape, which holds it solidly in place - even without this, there isn't a huge amount of movement. 2 mags included and the pictured 3-9x scope could also be included in sale. I've disassembled, cleaned and greased the moving parts and put a brand new Guarder hop rubber and nub in. I've test fired at home, bolt cycles smoothly and it's shooting an average of 445fps on the chrono using 0.2g BBs. I think the gun was also sold as a "Warrior G22", but essentially it's an L96 with a custom stock. Retail price for new ones seems to be around the £120-140 mark. Appreciate this is a difficult one given my uncertainty around some of the parts, but even a ballpark figure would be helpful!
  19. Possibly. I'd be surprised if postage for any of those would be a little as £3 though (at least if he wants any kind of tracking or insurance)
  20. Time Left: 6 days and 20 hours

    • For sale
    • Used

    A maruyama fmg9 with an extra fmg mag. Only tested it and used it sparingly at one gameday. Cool gun and a good performer but I need to reorganise funds. I'm asking 205 TYD and will come in the original box However I am open to offers dropped price to 205 as i need gone asap

    £205

  21. Just ordered an actual real Safariland holster (rather than the clone I'd planned on buying) for my P320 X-Carry. Decent price too! https://www.varusteleka.com/en/product/safariland-7390-7ts-als-pistol-holster-sig-sauer-p320-unissued/79876
  22. Time Left: 6 days and 20 hours

    • Wanted
    • Used or as new

    New or second hand

    £10

    , Dorset - GB

  23. I'm guessing that's MINUS £3 ?, probable cost of posting ?
  24. "Or collect from Skirmish Airsoft Billericay Skirmish Wood, Outwood Farm Road Billericay, CM11 2TX , price -£3" That's a new one, charging for collection from a site. No wonder he's financially fucked
  25. TM Desert Warrior with Replica Surefire X300u-a and RS Hogue Grips
  26. Time Left: 6 days and 20 hours

    • For sale
    • Used

    Double eagle mws bolt and trigger mechanism without zet plate. £35 for the bolt £55 for the trigger pack £80 for both. Work as they should but with some minor wear on the bolt, trigger mech is pretty much as new. Prices include fees and postage.

    £80

  1. Load more activity
×
×
  • Create New...