Jump to content
Classifieds rule 5 - adverts must have the username and date in photos. Adverts failing rule 5 will be deleted

All Activity

This stream auto-updates

  1. Past hour
  2. Cooperman26
    No difference. And now the motor isn’t working at all 😩 than you for advising though!
  3. Baldie
    Baldie joined the community
  4.    davidf reacted to an advert: VFC HK416A5 GBBR
  5. BigAl
    Should add some for rule against stunts like that. Something like posts dprice must be the actual price, if unsure post £1234. Wow that is belter, reckon he was ripped of if he paid that new, let alone trying to flog it for that. lol
  6.    BigAl reacted to a post in a topic: Macks airsoft dreamers of the week thread
  7.    BigAl reacted to a post in a topic: Macks airsoft dreamers of the week thread
  8. EDcase
    Yeah, that could be the problem I mentioned of a short in the body. With the motor in place try pushing the main wire around to see if that makes a difference.
  9. Cooperman26
    Red circles, the main screws to keep it into place. As soon as I go over half way into them, it again dies and nothing happens. Take them back out and sit motor in place and it’s fine. 😩
  10. EDcase
    Hmm, that IS strange. What do you mean, 'screw it in half way'? What about if you pull it out slightly so the screw holes don't line up? Also try moving the wire with each trigger pull.
  11. Today
  12. Cooperman26
    I don’t 😭 it’s now working when in the pistol grip position. But as soon as I screw it in half way it again stops. Won’t lie, it’s giving me a headache 🤕
  13. EDcase
    That indicates there is a short in the body. Do you have a multimeter? If so check continuity between the body and each motor wire.
  14. Jordone

    Time Left: 6 days and 22 hours

    • WANTED
    • USED

    Stock ish saiga 12k + mags ideally NO HPA Have a GHK URGI 10.3 V2 fully upgraded internally (no mags) for trade if interested

    Ask for price

  15.    Gunboat Diplomat reacted to a post in a topic: If you could change the joule limit, would you?
  16. Tommy_Rockstar
    Tommy_Rockstar joined the community
  17. Travel The World
    Travel The World joined the community
  18.    Austeyr reacted to a post in a topic: Cybergun Thompson
  19. Cooperman26
    No joy. when it’s out on its own no issue works. as soon as I attached it into the grip position nothing. I cant see any wires broken or anything
  20. canystore
    canystore joined the community
  21.    Cannonfodder reacted to a post in a topic: Macks airsoft dreamers of the week thread
  22. Cooperman26
    Morning sir! I shall have a look! Thankyou for an option
  23. Hawke
    Hawke joined the community
  24. Schorah
    Schorah joined the community
  25. Yesterday
  26. Gloucestertaxis
    Gloucestertaxis joined the community
  27. cotswoldminibus
    cotswoldminibus joined the community
  28. Ujustgotsarged

    Time Left: 6 days and 14 hours

    • FOR SALE
    • NEW

    Victor optics 1-6 x24. Lvpo. Illuminated reticle, throw lever, clone geisellle high mount, 1 of the tabs on rhe mount is missing, but its still secure. £90 all in posted

    90.00 GBP

  29. Ujustgotsarged

    This advert is COMPLETED!

    • FOR SALE
    • USED

    Mp9 gbb, fully working. Just serviced it, fully working, mag is gas tight. Holo has been shot but still works, just a few extra reticle. Has 14mmccw outer barrel and orginal outer barrel included. Originally 2 tone, most of the blue is off £140 all in posted

    140.00 GBP

  30. Ujustgotsarged

    Time Left: 6 days and 14 hours

    • FOR SALE
    • USED

    Tm 416 delta ngrs, fully working. Used, couple of scratches. Dean's conversion, fps soft air piston and piston head, m95 spring, prommy barrel and begady bucking. 1 aeg epm1 mag, aeg mag adapter included. Last round sear broken (replacements are £6), this doesn't effect operation. £330 all in posted

    330.00 GBP

  31. nikvanorton left Positive feedback for TheGasAddict
  32. Austeyr
    From what I remember (Cyma/Cybergun same pew?) I had to shim my Cyma Thompson screw as it was able to be tightened too much to the point it wouldn’t fire but if it was loose the grip was also loose. The same happened on the dodgy KA one I bought off of here a while back, to the point there was at least half a centimetre gap from receiver to pistol grip to get it to work. Not a guarantee it’s the same issue, obviously, but that was my issue so maybe the same for you?
  33. Lyndication
    There aren't any, you gotta import them
  34.    Impulse reacted to a post in a topic: If you could change the joule limit, would you?
  35. EDcase
    Yeah if that solves the problem try it for a while. It will loosen up but hopefully still do the job
  36. Fergus66
    I wonder what a none working SomoGear MK1 Ngal would bring ? Thank you to everyone who has replied to my original post I genuinely appreciate the advice and guidance.
  37. Shotround
    Maybe im going mad, but really struggled to find a madbull adaptor that is in the UK
  38. Cooperman26
    My god! Stress levels 100000x fitted the wood kit, a few amendments needed not an issue. Plug her in, ran a few mags no issues. Then just went dead. Took her apart, checked the fuse, checked the connections, no issues, took the motor out where it sits plugged in, Pew pew! Awesome! Screwed motor back into place, attached battery, NOTHING. Took the motor back out, tested again, ABSOLUTELY FINE. Put it back in position, DEAD. Did this numerous times. Am I missing something blindingly obvious!?
  39. Austeyr
    The more you use it, the Velcro will wear in and make it easier whilst still securing it better
  40. Alfie_0
    Cheers for the reply all, to answer @EDcase, no I can't pull the mag out. I had some velcro strip laying around, have shoved some of that in the magwell, seems to have removed the play, bit too late to test atm though, might upset neighbours. Only trouble is it has made it a bit of a pain to get the mag out, but is something I can live with
  41. Ujustgotsarged

    Time Left: 6 days and 11 hours

    • WANTED
    • NEW

    Looking for a p-10c, with extra mags if possible

    1,234.00 GBP

  42. EDcase
    I think the 'click'is just the mag touching the top of the mag space. When the mag is in can you pull it out without pressing on the mag release? Rather than modify all the mags out might be possible to add a shim or JBWeld to the top of the mag catch
  43.    Austeyr reacted to a reply to a status update: Lovely T2 1911 clone I’m selling on!
  44.    TommyPee reacted to a reply to a status update: Lovely T2 1911 clone I’m selling on!
  45.    PopRocket123 reacted to a post in a topic: Gun picture thread
  46. Shotround
    Shotround joined the community
  47. 337 left Positive feedback for Which gun????
  48. Grave Squirmer

    Time Left: 6 days and 10 hours

    • FOR SALE
    • USED

    Medium Price includes postage and fees.

    30.00 GBP

    Leeds

  49. Colin Allen
    Two possible solutions: 1. Find a hop unit with a somewhat longer feed tube. 2. Shim the top edge of the mag catch recess on the mags.
  1. Load more activity
×
×
  • Create New...