Jump to content
Classifieds rule 5 - adverts must have the username and date in photos. Adverts failing rule 5 will be deleted

All Activity

This stream auto-updates

  1. Past hour
  2. TheFull9
    I misunderstood the OP originally, but FN posted on IG and clarified this. They're only stopping making/selling the civilian versions they sell in the US, military production is unchanged. I don't know the MSRP per se, but a taking a quick look on GunBroker the various rifles seem to start at around $3700 and go up from there, which most likely means they were hardly actually selling any. With companies as big as FN, even if something is making profit they often won't deem it worthwhile unless there's really huge volume/money in it. I'd imagine their more 'conventional' 5XX series pistols and the FN15 ARs do a good bit more volume since they're more suited to the American market and much cheaper. I remember many years ago there was a relatively brief period where they sold semi-only F2000s in the states (called the FS2000 I think), which I believe were made in Belgium then shipped over the pond. But again I'd bet there was very little profit in it comparatively speaking, so they're fairly rare and collectible in the US now. Does leave me wondering if they'll end up cancelling the likes of the PS90, M249S etc in future.
  3.    HZR13 reacted to a post in a topic: Gun picture thread
  4.    HZR13 reacted to a post in a topic: Gun picture thread
  5.    HZR13 reacted to a post in a topic: Gun picture thread
  6.    MistakenMexican reacted to a post in a topic: Gun picture thread
  7.    MistakenMexican reacted to a post in a topic: Gun picture thread
  8.    MistakenMexican reacted to a post in a topic: Gun picture thread
  9. Jakubb
    Hi guys, I'm going to my first airsoft game soon. Besides my gun and gear, what else should I bring? Any tips on useful things to take?
  10.    Socks reacted to a post in a topic: Macks airsoft dreamers of the week thread
  11.    Socks reacted to a post in a topic: Macks airsoft dreamers of the week thread
  12.    Socks reacted to a post in a topic: Macks airsoft dreamers of the week thread
  13.    Cannonfodder reacted to a post in a topic: Macks airsoft dreamers of the week thread
  14. Jakubb
    Jakubb joined the community
  15. Lyndication
    It's a GBBR, you can just use an NPAS to set the power output independent of the PSI. It's handy because you might want a higher PSI for better cycling, without making it run too hot.
  16. Today
  17. Cannonfodder
    Tbh I'd leave it alone as that equals 1.05j. You won't need to up the muzzle energy much before it becomes too hot for 99% of sites and that small increase will do bugger all to increase performance. If you need more range then you're better off upgrading your hop up or use heavier bbs (note joule creep from heavier ammo might make the gun hot so you'd possibly need to dial the psi down)
  18. DavidRZ
    I see no real difference — good quality matters more than bio or non-bio.
  19. DavidRZ
    DavidRZ joined the community
  20. july_pi
    custom gbb workshop S&W CS-1 US Customs service ares airsoft CO2 https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg15IVz04Hb00wPlRUTEzjBouB8ZmH8m0pB4jlSzMNp0SgBgZs9ygVZWnuG_HNWV4h1X2PiANWya2ER [/img]
  21. ENCLAVE-COMMANDO

    Time Left: 6 days and 18 hours

    • FOR SALE
    • USED

    selling the tag co2 multi power shell launcher please dm me for more info if needed

    80.00 GBP

  22. ENCLAVE-COMMANDO

    Time Left: 6 days and 18 hours

    • FOR SALE
    • USED

    selling an boxed S&T m320 with two aps hellfire shells co2 with co2 charger, Also has a 3d printed stock . the hellfire shells are a bit tricky they leak sometimes and sometimes they don't , i apply ptfe grease to the seals . please DM me for more information

    150.00 GBP

  23. aandbird
    aandbird joined the community
  24. Yesterday
  25. Markusx0
    Asked him to check if some parts on a pistol were steel and he just copy pasted the item description from the site instead 😂
  26. Jonathan7787

    ARMY SA-80-A1

    Jonathan7787 posted an advert in Boneyard

    Time Left: 6 days and 15 hours

    • FOR SALE
    • USED

    In great condition other than the fact the gearbox has developed 'zinc pest' and has started to spontaneously disintegrate. This can happen to cheap die cast metals over time where the metal simply breaks apart. I have no photos of the internals, its too tricky to dis-assemble just to show broken bits, but it is safe to say the housing of the gearbox is un-usable and would need replacing if this was to be re-commissioned. As far as I can tell everything else is fine. Item has never been skirmished by myself, it was used as a training aid. The replica SUSAT is of unknown manufacture - I cant see anything on there but it is full metal and very similar to the real thing. The optics are not that good (just like the real thing) and the 'reticule' is just a graphic and NOT a pillar like on the real thing. Spares / repair only. Sale terms : UKARA / Skirmish membership or suitable proof of age is mandatory for the sale. Please ask questions, can supply additional photos Open to offers

    150.00 GBP

    Ashford, Kent - GB

  27. Tackle
    Tell us more ?🤔
  28. CELICANIGE

    Sniper Rifle

    CELICANIGE posted an advert in Guns Wanted

    Time Left: 6 days and 15 hours

    • WANTED
    • USED

    After starting back up after 20 years away. Wanting a cheap basic spring sniper rifle. Preferably with scope and bipod. Im in Lancashire. Thanks

    Ask for price

    Clitheroe - GB

  29. CELICANIGE
    CELICANIGE joined the community
  30. 1967PF44 left Positive feedback for adcole
  31. drgrzly left Positive feedback for ButcherBill
  32. Lyndication
    You can adjust the power by modifying the valve. Really recommend the Explosive Enterprises video on the VFC M249, (and the follow up video). Tonnes of really solid advice including getting it set up on HPA.
  33. TBTrig
    TBTrig joined the community
  34. Markusx0
    Avenger63 is also an unhelpful git 😆
  35. navyvet86

    Time Left: 6 days and 14 hours

    • FOR SALE
    • NEW

    Ultra high rate of fire folding yet long inner barrel length accuracy / power / speed gun. Huge package here with premium parts, a lot of work and an absolute work horse. All working fine. Occasionally trigger will need tuning to prevent it going burst on single, but that will happen at these RoF The original pistol grip has been sanded down to slim the profile so it doesn't bulge when taped to the front magazine folder/rail. So it is filed down underneath that. Now to the parts ... AAP 01 Aluminium front end kit Thread protector AAP folding stock Daniel defence sights Romeo 5 red dot optic Optic mount M600 surefire scout light and pressure switch Daniel defence offset light mount MVG ROE front grip Killer innovations trigger Ultra lightweight bolt Cow cow recoil buffers Recoil rod 150% recoil spring 200% nozzle spring 6.01 inner barrel (full length) Maple leaf autobot bucking Lightweight charging handle Tab selector Full stainless steel hammer set 2 magazines Had absolutely HUNDREDS put into this build and it is a total minigun RoF weapon. £8.99 tracked and signed postage. PayPal F&F Next day pick up.

    325.00 GBP

  36. mrfoxhound
    i did i left them a review, a very constructive one a year ago , nothing has changed , i predicted they would be done with in another year , gone are the days of throwing pallets on a field and taking cash in hand for a days airsofting
  37. shatis
    What psi should i be running a VFC M249 LMG at? I have mine HPA tapped. it currently shoots .25s at 300fps on 110psi
  38. woi
    woi joined the community
  39. iSkyeLuna left Positive feedback for Special K
  40. Special K left Positive feedback for iSkyeLuna
  41. ButcherBill
    Sellers remorse?
  42. Genc
    Genc joined the community
  43. Austeyr
    Looks terrible, send them to me and I'll take high grade quality photos of them for you... Start with the F90 😉😏 Looks good though, and lets it be the main focus without having any clashing from the background because it's a nice plain colour 👍
  44. mightyjebus
    https://www.sixmm.com/en-gb/products/maddog-g-style-smr-tactical-rail-handguardblk7-0inch?_pos=22&_sid=b6ddf8f1f&_ss=r only 1 left in stock at the time of posting. You'll need a 3d printed barrel shim and if you buy this let me know and I'll give you the file. It gets glued/epoxied inside the barrel nut and keeps the NGRS barrel from falling out
  45. whlbob
    whlbob joined the community
  46. Anonymoose
    Where'd you find it? I searched for one for ages and could only find it on an E&C 416C. I bought a complete one but wasn't too happy with it and sent it back.
  47. Darren1183
    Darren1183 joined the community
  48. HZR13
    Gun stands out well and no shadows, looks good to me
  49. ButcherBill
    Any pics I post are always a bit naf so trying something a little different. Don't really have a 'studio' area I can use & don't fancy trudging up & down stairs to utilise the garden (esp in a wet & windy Scotland) or the tiled flooring in my conservatory so my mancave floor will have to do. Honest opinions on the simple carpet background please...
  50. tside
    Cheers for the info I have the same handguards on a boneyard ak so might have to liberate em
  51. Tackle
  1. Load more activity
×
×
  • Create New...