All Activity

Jungle Tigerstripe G3 set. Top is medium reg, Bottom 32W 30L. £45 posted

Evolution Gear Nightforce Atacr 1-8x FFP LPVO. Comes with NF mount and Badger Ordnance C1 mount both by EG as well. C1 mount comes with attachment for offset red dot/RMR. £280 open to offers

For sale is this BOLT B4 DEVGRU Basic — brand new in box. This was an impulse purchase, but I’ve realised I still prefer my AK platforms. This EBB rifle features the Bolt Recoil Shock System (BRSS), which simulates realistic recoil by transferring kinetic energy from the piston to a reciprocating weight inside the stock. This mechanism creates a highly effective recoil simulation with every shot. I connected a battery just to test the recoil — and the kick was seriously strong. The rifle has never been fired, and the magazine is still sealed in its original packaging. It’s rear-wired, with the battery housed in the stock (since the buffer tube contains the BRSS recoil system). The recoil activates every time the trigger is pulled. The outer barrel assembly, handguard, receiver, buffer tube, and other trim parts are made from a mix of alloy, aluminium, and steel, while the pistol grip, foregrip, and stock are constructed from high-density polymer. Comes with the original vertical foregrip and box. More info on this model can be found here: https://www.b-sas.co.uk/product-page/bolt-b4-devgru-basic Rifle: £280 Shipping & pp fee: £20

I offer an aseembled device of Button Domination Timer 2.0 (DOMINATOR). It is suitable for Airsoft playground, events even large-scale events with duration up to 4 full days. Device is based on following components: PCB of RFID DOMINATOR 2.0 Drilled box of RFID DOMINATOR 2.0 (2x 16 mm holes for buttons) Arduino Nano V3.0 LCD 2004A with blue backlight (can swap for yellow if interested) 2x 16 mm button with LED backlight, red and blue 4x LED diodes 5V piezo buzzer 25 mm tree mounting tie-belt with auto-lock spring mechanism additonal parts like standoff spacer screws, M3 screws, pin headers Buttons are clearly visible even in complete darkness, so can be used during night events without a problem and are used as user-input for occupying the DOMINATOR point. The occupation starts counting the total time of the occupation of the point for the given team (i.e. the time continues from the moment where the last total time ended). The point is occupied by holding the button for 5 seconds continuously. If the hold is interrupted, the player must hold it again for 5 seconds. The progress of the occupation is also dynamically shown on the display by a bar. If the DOMINATOR has already been occupied by another team, holding the button for at least 50% of time will neutralize the point, meaning the original team is no longer active on the point and there is no more time counting for that team even if the occupation is interrupted (between 51 and 99%). Buzzer signals the successful occupation fo the point, when archived. The active team is also indicated by a separate LED diode for the given team in the right part of the DOMINATOR. Within the hardware, I will deliver also a BOM file and firmware in .hex format, which will be uploaded in the device also. I do not supply the source code .ino. You can clone DOMINATOR to any number of your own devices. I can also sell GERBER files for PCB production or .STL file for 3D printing the box (ask for the price). DOMINATOR's timer has a second resolution in which it counts and can visualize up to 99 hours, 59 minutes, 59 seconds. It can therefore also be used for several-day events such as LARP, MilSim. The referee can neutralize the point by pressing both buttons simultaneously. If both buttons are held down for an additional 5 seconds, the time counters for the blue and red teams will be reset - erasing process. I can include the name of your team or the area where it will be operated in the firmware. I can also set a 3-letter team name if you do not want to use BLU for the blue team and RED for the red team. Box dimensions 124x123x48 mm, weight 300 grams. DOMINATOR can be mounted on a tree, pipe through a strap with a spring mechanism. DOMINATOR should be placed at eye level for a good viewing angle. DOMINATOR has an accessible contrast potentiometer from the back (necessary to change to summer and winter mode). It has modular design that allow you to replace all main components and buttons without needing to solder anything. You can just unplug the component and plug in the new one. DOMINATOR is powered via a USB miniUSB cable (not supplied). Consumption 70 mAh. Suitable for power supply from a power bank. You can power it up also using 9V power supply such as Lipo batteries (necessary to solder the connector and cables). By changing the wiring, you can also achieve different behavior of the button's LED backlight, where it can light up or go out when pressed, etc. It's up to you. Post fees are not included within the price https://www.youtube.com/watch?v=KUVEdYwC2Ec

Assume repro unless otherwise stated. £5 everything, torches £15 These are RS: BCM pistol grip £10 Arsaka 1913 rail hand stop £10 magpul mlok hand guard things £10 Pistol and mag pouches £8 each Magpul tan 1913 foregrip £19 Barrels are from VFC GBBRs AU barrels with out the guide hop just what you can see, 11.5 and 14.5. £15 each Any questions just ask. Just shoot be offers tbh, be reasonable and big discount for bulk purchases as I just need to cut all this stuff down. Thanks!

Selling my WE M4 gas blow-back RIF rifle, along with several attachments: Genuine Magpul butt stock, handguard, and fore grip FAB defence grooved pistol grip Brugger & Thomet rotex silencer Flip up front iron sight NcStar red+green dot sight Madbull bb’s 2x Predator vertex gas bottles Airsoft gun is barely used, internals all good. Few scratches on exterior but nothing major.

For sale is this CYMA CM708-U spring-powered sniper rifle. I purchased it for collection, and it is in excellent condition. This is the upgraded version of the original CM.708, featuring a steel cylinder with a low-friction coating, a brass cylinder head, an aluminium piston with a rubber shock-absorbing pad, and a 90-degree piston catch/sear. This airsoft model is based on the Russian Orsis T-5000 bolt-action sniper rifle used by the FSB and FSO. Tested at 484fps and supplied with 3 x magazines. It features: - Alloy barrel, bolt, stock tube and barrel - High-density polymer body - 14mm CCW thread - Enlarged alloy muzzle brake - VSR style magazine placement - Harris-style bipod lug More information about the CM708-U can be found here: https://www.patrolbase.co.uk/cyma-cm-708-u-upgraded-version Rifle: £120 Shipping & pp fee: £15

Selling my WE M4 gas blow-back RIF rifle, along with several attachments: Genuine Magpul butt stock, handguard, and fore grip FAB defence grooved pistol grip Brugger & Thomet rotex silencer Flip up front iron sight NcStar red+green dot sight Madbull bb’s 2x Predator vertex gas bottles Airsoft gun is barely used, internals all good. Few scratches on exterior but nothing major.

As new, never fielded. Illuminated and very clear optic. This will come with both the tan qd mount and the original black mount with the picatinny mounts for red dots. Comes with the lens caps and a honeycomb lens protector. The zoom ring is stiff as it is new. All in p&p and fees £95. Payment via PayPal Cheers

Almost new, in great shape. I have installed a longer handguard to recess the silencer which has room for a tracer. Comes with the foregrip and pts enhanced grip. Extended battery cover and original mid cap mag Great quality with maple leaf hop and inline mosfet. P&p is £15 via pf48 or i can drop off in the Manchester area. Payment via PayPal Cheers