All Activity
- Past hour
-
GraniteFraggle reacted to a post in a topic:
(Not quite a) UKAPU win
-
Convert reacted to a question on an advert:
WE SVD gbbr
-
Black Half-Finger Tactical Gloves with Reinforced Knuckles - Size Medium
PowderedAsh posted an advert in Gear
Time Left: 6 days and 23 hours
- For sale
- As new
Nothing fancy about these, they are just a new pair of black half-finger tactical gloves with that reinforced carbon fibre-looking knuckle part. Bought them for a particular loadout, then realised the loadout was more suited to coyote-coloured ones. Price includes shipping in the UK£5
, Kent - GB
-
Time Left: 6 days and 23 hours
- For sale
- As new
The stamp on the back notes a manufacture year of 1970, so we'll call this "New, Old Stock". It also notes the manufacturer's code, Factory 3522. The PLA was unusual in staying with stick-type grenades as their primary infantry hand grenade until fairly recently. One can still see load bearing gear issued to some PLA troops (especially lower priority units) which has grenade pouches designed to carry this pattern of stick grenade. The bag would have been standard issue for PLA troops since the 60s, having the same basic design philosophy and reach as the ubiquitous 'Chicom Chest Rig'. Good for a Vietnam look, Sino-Viet border conflicts, that kind of thing. The wooden training grenades are painted, so the 'screw cap' doesn't actually come off or anything like that. They are just a lump of kindling designed to mimic the real-deal for training. They look pretty cool arrayed in the bag though. Price includes shipping in the UK£20
, Kent
-
Austeyr reacted to a post in a topic:
Gun picture thread
-
Time Left: 6 days and 23 hours
- For sale
- As new
It's a waterproof/oil proof tough cloth or mat that you'd put down on your nice clean kitchen table to tinker with your guns so that the missus doesn't snap at you. I'm not sure if these are actually PLA issue, but they seem pretty nifty so I picked one up while I was there. The Chinese writing on the cloth says "Gun Cleaning Cloth (Type 191 Automatic Rifle)". The text below the rifle is an idiom meaning "Caring for Equipment is Everyone's Responsibility", and then some step-by-step instructions for gun cleaning. If you have a Type 191 Rifle, you could pop it on there. If you don't, I suppose you could use it as a mat for anything else. Price includes shipping in the UK£6
, Kent - GB
-
ButcherBill reacted to a post in a topic:
Gun picture thread
-
Time Left: 6 days and 23 hours
- For sale
- As new
For sale is my TM M4 SOPMOD NGRS. Only purchased this a few days ago and have decided to sell as I can’t part with my other M4 PDW. It’s in fantastic working condition, with the correct mags it locks back on empty and the recoil is a lovely feature. included in sale: - RIF (RRP £449.99) - holo sight (green and red and brightness adjustable). - Upgraded stock. - Original TM stock. - TM stubby grip. - 2 PTS EPM mags (RRP £27) - Original TM M4 mag (midcap). - Metal high cap mag. - Full metal suppresor (unsure of brand). - Metal angled rail extension. - Sling. - Nuprol hardcase (RRP £90). - Speedloader. -Original parts to fit original TM M4 batteries. It currently has a mod fitted to fit Tamiya. Local collection in Salisbury or Stafford is preferred however I will post. Postage cost will be above £20 die to the size and weight but I’ll arrange this and get a quote. I travel up to and from Stafford to Salisbury every weekend so I can meet in between for collection. any questions pls ask. Asking £350 collected.£350
- GB
-
Time Left: 6 days and 23 hours
- For sale
- As new
These are the standard issue tactical glasses issued by the PLA since 2021. When I bought them, I was assured by the manufacturer that they were ballistic rated polycarbonate lenses, UV filtering, all that good stuff. However, I have never tested their ballistic protective properties myself. The label on the front describes protection from UV and sand/dust. It also states the manufacture date, October 2023. In terms of design, they are basically a copy of ESS Crossbows. The PLA, as is often the case, takes the phrase "No need to reinvent the wheel" rather to heart. Sold as New, I only tried them on once. Price includes shipping in the UK£18
-
After thinning out some rifles I have ended up refilling the space they have left already but who doesn't love a nice classic rifle....
-
OK mate then in that case I have one, make me a sensible offer to include fees and postage. - Today
-
Time Left: 6 days and 22 hours
- For sale
- As new
So this is a pretty cool find I picked up while in China. It's the optic from a PF-89 80mm disposable anti-tank rocket launcher. The rocket launcher was the PLA's equivalent to the AT-4 from 1989 until the early 2010s, after which it was phased out in favour of the DZJ-08. As far as I can tell, each 2.5x scope was boresighted to each individual rocket launcher. Since the launcher was disposable, this implies the scope was too. A weirdly expensive solution for the oversized and underfunded PLA of the 1980s to issue disposable magnifying optics for rockets, but who am I to judge? If you were hoping to mount this on your RIS as a neat little low-power rifle optic... think again! There is no simple way to mount this to anything (unless you have an old PF-89 knocking around?) without significant modification. And even if you do, they were boresighted at the factory to each rocket, so there is no way to zero the scope. If you were working on your own rocket launcher project, or just like interesting military curios, this is for you. The scope housing is mostly made of plastic, probably ABS. The optic is very clear once you get your eyeball nice and snug in the rubber eyepiece, with the etched range and windage scale coming into focus only when your eye focuses on things in the distance, as a proper scope should. The sale includes the polystyrene box it came in. As far as anyone's guess, this one was manufactured in 1996 and has only been opened once (by me) to verify that its okay. It's therefore 'new, old stock'. Price includes shipping in the UK£40
, Kent - GB
-
Galvatron reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
sent another DM -
Running them on the batteries I didn’t covert it as first gun and just getting into it. I double checked the motor connections and even tightened the crimps on the wires to get a better connection. it’s weird it sometimes quietly hums when I have the trigger pulled like it wants to fire but not enough juice to cycle. I have changed batteries and mags and no mag etc and no change in symptoms.
-
Macks airsoft dreamers of the week thread
Enid_Puceflange replied to Mack's topic in General Discussion
And it only comes with 66.6% of the “tripod” -
Time Left: 6 days and 22 hours
- For sale
- As new
This is the standard issue 3-Point Sling for the QBZ-191 Rifle, currently standard issue for the PLA. It's new. I bought it while I was in China, but found that I don't like 3-Point slings. Figures. Price includes shipping in the UK£7.50
, Kent - GB
-
Time Left: 6 days and 22 hours
- For sale
- Used
This is the standard duty belt / trouser belt for the People's Liberation Army since 2017. Its a very simple design, with a single-piece metal buckle and a nylon 1.5" belt with a securing loop. Does the job, with no frills. Has the iconic PLA emblem on the buckle. If the stamps are of interest, the ones on the belt and buckle state it was manufactured in August 2018. The buckle features the manufacturer's name, Jihua 3543 Clothing & Accessories Company Ltd. I bought this while I was in China. Price includes shipping in the UK£7.50
, Kent - GB
-
ButcherBill reacted to a status update:
Putting this M4 lower reciever together, saying to myself "don't let the front pin de
-
Time Left: 6 days and 21 hours
- For sale
- As new
PARA BELLUM P226 Early Type - Collector's Edition, only test fire. Everything is stock.£200
-
LarryLobster joined the community -
Colin Allen reacted to a post in a topic:
The 'How Did Your Airsoft Day Go? Thread
-
ButcherBill reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
Nickolai joined the community -
Time Left: 6 days and 21 hours
- For sale
- Used
Selling due to barely playing airsoft anymore. Standard only change is sling points were removed because I found them irritatingly annoying and I never run a sling. 2 batts 1 standard mag and 1 drum (3000rnd!) mag included. Cash on collection preferred.£300
- GB
-
Cooperman26 reacted to a post in a topic:
Gun picture thread
-
Cooperman26 reacted to a post in a topic:
The 'What have you just bought' Thread
-
Time Left: 6 days and 21 hours
- For sale
- Used
Selling due to barely playing airsoft anymore. only defect is that the 'flash eliminator' is missing. We all know how good these things are out the box, it is standard with the exception of the charge handle spring has been adapted so it doesn't fall out. 1 battery 2 hicaps 4 standard mags and viper chest rig included. I would prefer cash on pick up as opposed to posting, but not against posting.£300
- GB
-
Time Left: 6 days and 20 hours
- For sale
- Used
Have for sale my S&T Kar98k. This has been used at a good handful events, has been weathered as well. Internally sound with the Bolt Action Dude upgrade kit and with an Maple Leaf M145 spring. Used Condition Comes with: Two Mags S&T ZF39 Sling and Bag Looking for £300 p&p Bolt Action Dude Kit -Stainless steel cylinder head -Aluminium piston -Aluminium spring guide with ball bearing -Steel Spring stand Compatible with standard VSR spring with 7 and 8mm inner diameter£275
-
https://www.usedairsoft.co.uk/rif-s/electric-powered/jg-sig-550-with-custom-apocalypse-paint-job_i84059 Pricing is meh but don't try and bullshit people. Even Stevie Wonder can see that "custom" paintjob is a roundabout way of you trying to conceal it's a green two-tone job.
-
Cheers, I forgot they had them, I've used sixmm before & assumed the borderforce had fecked up my order when they opened it up (had a scented candle in place of a tan grip)
-
So rare I ordered one from retail 4 weeks ago!!! W&S still produce them, marketing them as rare is incredibly wrong! People just don't look in the right places.
-
The 'What have you just bought' Thread
ButcherBill replied to Cameron364's topic in Guns, Gear & Loadouts
The front sight was stable but the gas tube was missing & the screw holding the handguard retainer to the front sight was sheared off so the wobble came from there mainly, simply having the gas tube in situ secured the retainer & stopped the wobble by 95%. The M16A3 now has 98% ish of the parts it should, including a new gearbox, it'll never be used in a game but I like my toys to be working if possible, prob have 3-4 more that need some tlc but the M16A3 annoyed me because it arrived as a box of bits (but not all the bits). -
Greek joined the community -
Time Left: 6 days and 19 hours
- For sale or swap
- Used
We SVD Dragunov WILLING TO TRADE FOR VFC AK-74M -Used maybe three or four times since I've bought it. -Comes with 7 leak free magazines -6 WE HPA taps for magazines -Side rail mount -1.5x-4x Scope, brand unknown. -barrel wrap -spare inner barrel and hop unit -original box INTERNALS: -TNT APS-X WEPSTAS HOP-UP RETROFIT with 650mm barrel -New clutch precision steel trigger unit -New fresh WE NPAS installed reason for selling is due to impracticality on my local and non local fields for sniping and such, Would rather sell it and buy a short rifle. willing to negotiate price if reasonable willing to ship£700
Mullingar, Westmeath - IE
-
I reckon the pin hole has maybe been drilled out to get the hand guard to fit, it's probably from a different model/brand. I had to do similar to swop hand guards on mine.
-
i'll have you know... it's SUPER RARE.
-
Td5damo joined the community
