All Activity
- Past hour
-
Time Left: 6 days and 23 hours
- For sale
- As new
Title. Looking for Arcturus viytaz 74. Believe this should come with 11.1 battery, silencer.£1,234
- GB
-
zealousGG joined the community
-
Time Left: 6 days and 23 hours
- For sale
- Used
Hello here for sale is my collection of AR rifle parts with one complete gearbox & lower assembly. The uppers are all G&P (Clockwise threading on the barrels) and can be swapped out depending on which type of rifle you are looking to use. From top to bottom: -M4 flat top upper with adjustable 10.5" guarder steel barrel. I believe this was designed to account for the various airsoft tolerances with hand guards and rail sections. Not been made for many years now though. There are 2 grub screws on the top and bottom of this barrel that allow you to shorten or lengthen depending on what you are looking to fit. This is CCW 14mm threading. No inner barrel or hop up. -G&P XM177E2 upper and barrel section. Also with this is a shorter muzzle brake without vents. I would usually use the hop unit/inner barrel thats currently fitted to the complete RIF with this upper so no spare with this. -G&P Colt 602 slickside upper with correct chrome faux bolt plate. Spare front receiver magic pin fitted on this one. -G&P M653 with blue steel 14.5" pencil barrel. This was bought separately and swapped with an original aluminium one years ago. The gearbox has SHS high speed gears fitted and possibly some other upgraded parts but cant be sure without opening it up which I don't have the patience to do anymore. Rear wired to deans to the buffer tube, which is one of the nicer threaded cap ones. You will need a fairly small lipo to fit. I always used 1000mah 7.4v vapextech ones which usually lasted a whole skirmish day with a full charge. Looking to sell to someone who is interested in the classic ARs and would take the whole lot in one go. Took a while to accrue these parts as it usually meant taking parts from other RIFs. Looking for around £310 posted with paypal fees included. I will only split parts if its a very good offer. UKARA or next best valid defence will be required for sale to go ahead.£310
-
Rogerborg reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
Rogerborg reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
Rogerborg reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
Rogerborg reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
Rogerborg reacted to a post in a topic:
New to the forum
-
Rogerborg reacted to a post in a topic:
New to the forum
-
Rogerborg reacted to a post in a topic:
What grinds your gears on forums
-
Cfaul joined the community -
Oops. I missed that
-
Cannonfodder reacted to a post in a topic:
VFC PPsh 41 GBB
-
Macks airsoft dreamers of the week thread
Cannonfodder replied to Mack's topic in General Discussion
Probably the only boobs he's going to get his hands on without paying -
Baser reacted to a post in a topic:
Macks airsoft dreamers of the week thread
- Today
-
Hello all Does anyone know of any Russian style replica scopes that will fit onto a Cyma Vintorez without modification as I know the PSO1 replica I have on my SVD won't fit due to the lighting part that protrudes from the bottom? I currently have an eotech replica on an AK side mount which fits and if you squint hard enough can pass for a 1P87 sight which I am contemplating buying but would rather have the classic appearance with the scope Cheers
-
Time Left: 6 days and 22 hours
- For sale
- Used
Brand new never used Buyer to pay postage and PayPal fees or collection in person£50
- GB
-
Time Left: 6 days and 22 hours
- For sale
- Used
Venting gas from centre, I’ve spoken to some gunsmiths and they have said it’s an easy fix and pretty common. Comes with surefire handguard with integrated torch worth £200 Buyer to pay postage and PayPal fees or collection in person£200
- GB
-
Time Left: 6 days and 22 hours
- For sale
- Used
only been used for 1 & 1/2 full game days total !! custom work and upgrades carried out by patrol base machining barrel to shorten for short handguard Real steel Midwest industries short M-LOK handguard retail on handguard alone is £250 real steel HB industries mag release upgraded 6.01mm inner barrel upgrade asg evo trigger 9x asg mags with 3d printed magpul 1x suppressor adapter Comes with original handguard and other parts comes with original mag bases the fire selector might need looking at it came from patrol base. It is not broken just wants adjusting nothing major. Locks into place fine but may need tightening Buyer to pay postage and PayPal fees or collection in person£550
- GB
-
What do you think, pleased with it.
-
novioman reacted to a post in a topic:
VFC PPSH-41 GBBR
-
Time Left: 6 days and 22 hours
- For sale
- Used
Like new, very little use. Buyer to pay postage and PayPal fees or collection in person£200
- GB
-
I managed to get one imported with customs paid for £550
-
Time Left: 6 days and 21 hours
- For sale
- As new
Brand new/never been used. Bought to turn into shotgun but never got round to it. Buyer to pay postage and PayPal fees or can collect in person£120
- GB
-
Time Left: 6 days and 21 hours
- For sale
- Used
For sale due to some emergency dental bills. Has been a good go-to over the last few years. Cycles well, some scuffs as seen on the images. Has had some grip tape added and some Glock trademark stickers to the slide. Will come with 1 leak free mag. Won't come with the suppressor mount. Will clean off the mud where I dropped it at my last game day!!£60
-
Time Left: 6 days and 21 hours
- For sale
- As new
Hi guys, My ongoing OD clear out continues, this time it's a Pantac Wasatch vest/plate carrier. Great vest, built for real steel use & you can feel it in the quality, internal mag pouches that will take up to 10 stanag mags, adjustable to take larger mags. Loads of molle on the front & back for anything else you want to add, pockets for plates, real or fake. Manufacturers blurb: MOLLE Attachment 4 Full Size Internal Magazine Pouch ( Each Holds 2 M4 / M16 Mags ) 2 Half Size Internal Magazine / Radio Pouch ( Each Holds 1 M4 / M16 Mags ) 5 Removable & Adjustable Velcro Closure for Mags 1 Elastic Type Closure for Radio Adjustable size ( Shoulder to Waist: Approx. 45-60cm / Waistline: Approx. 85-130cm ) Front & Rear Plate Pocket Removable Shoulder Pad Condition is excellent, no signs of use. Price is all in, delivery will be a signed for service. Holler if you want any more info or pics. Cheers Mark£55
-
Thats what i want to do eventually but they don't have to be gold to start with. Just a little project I want to do.
-
Whew lad
-
Time Left: 6 days and 19 hours
- For sale or swap
- Used
G&G M4 Combat Machine [CM16L] - Polymer lightweight M4 with some internal upgrades FPS: 285.2 on .28g / 1.05j (~337 on .2g, no hop. Or ~325-330 with hop set for .28g) Serviced and Upgraded to sell Rear-wired to Deans New; ZCI Poly rotary hop unit Maple Leaf Macaron 60 w/XT Omega Nub FMA 107mm silencer ZCI 400rd Hi cap Flash mag Also comes with; Iron sights Grip bipod grip Tan Rifle bag - great condition, other than one of the main compartment zippers doesn't close the zip, still closes with the other one £150 Collected £165 Posted Any questions, feel free to ask£150
Doncaster, South Yorkshire - GB
-
Time Left: 6 days and 19 hours
- For sale
- As new
Recently paid for a Warrior Assault Systems Molle harness with webbing thinking I could combine it with a chest rig I own but it's not compatible and too large. Let alone I'm now leaving the sport as I have other priorities. It's brand new out of the box and never used on site, only used to size up. Size is M/ Medium Paid £280 but looking for £130 as looking for a quick sell. Postage is +£6 (for example £136). Collection from MK78ES WhatsApp me if interested on 07476294321 Original item link: https://www.uktactical.com/product/warrior-patrol-belt-kit-webbing-16918#?va riant=209£130
Milton Keynes - GB
-
Time Left: 6 days and 19 hours
- For sale
- Used
Licenced Warrior Assault Systems Multicam chest rig worth £170. Selling as I'm leaving the sport and planning to move. Has been through 5 games and doesn't have a single tear or spec of damage. Everything in the images is what you get. WhatsApp me on 07476294321 if interested Collection from MK78ES Postage is +£5 Original listing: https://www.uktactical.com/product/warrior-901-bravo-m4-multicam-7450£80
Milton Keynes - GB
-
Macks airsoft dreamers of the week thread
BYRNEMORGAN52 replied to Mack's topic in General Discussion
Bargain. Now make a silicone based tit and it'll be spot on. -
JamieD25 joined the community -
Time Left: 6 days and 19 hours
- For sale
- Used
Spare stock has been sitting in a draw for a while. Has been used but works as it should. £70 posted or best offer£65
-
Help trying to find 1911 v12 or similar
hitmanNo2 replied to evoteak's topic in Guns, Gear & Loadouts
Do you want screen accurate gold ones? -
-
Julien94700 joined the community -
Type 64 electric rifle , never used , slight makes.
CallumT20 commented on iesty2711's advert in Electric Rifles
Do you have a picture of the gun with the current date? -
Welcome ✋ Outdoors is a whole different experience. Slower paced and more strategic. Let us know how you get on
