All Activity
- Today
-
Time Left: 6 days and 22 hours
- FOR SALE
- USED
G&G MP5 magazines. x1 high cap x6 mid caps All magazines are in fantastic condition with very little use on them, I believe the high cap is something like 300rds and the mid caps are 50rds. Can confirm these feed flawlessly in my ICS MP5, friends Cyma MP5 and my G&G MP5 before I sold it. Reason for sale is I am drowning in mags so I need to let some go!80.00 GBP
-
Lyndication reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
Time Left: 6 days and 21 hours
- SALE OR SWAP
- USED
The venerable CM M4! This used to be the loaner gun for mates who were getting into Airsoft so they could get a feel for what it was all about, so it's been well used but still sturdy, no cracks or heavy damage. The last game it was used at was likely wet, then gun went away damp and since forgotten about hence the rust spots on the steel parts. The gun cycles fine and I am happy to send a video if needed but I would definitely recommend a service at this point as the old war horse deserves one as it has been languishing for at least a couple of years. Please view this as a project gun due to this! It will come with the foregrip, an ASG high cap and the original, grizzled G&G high cap both of which wind fine. If I can find one I'll also throw in a battery free of charge. These guns seem to retail at around £180-220 new now, thanks inflation! Please drop me a message if you have any questions.100.00 GBP
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
We g36 (g39) RAS GBBR comes with 3 mags (however one is missing parts and is boneyard) currently shooting 1.1j approximately 335fps (ish) on a .20 also comes with spare high power nozzle. Also has a full RA TECH steel triggerset. £220 posted Ono220.00 GBP
- GB
-
"Cheap" often becomes expensive down the line with GBBRs. You can get a Golden Eagle M4 with 2 or 3 additional mags for under £400 but the Western Arms gas platform it's based on is somewhat dated and getting spare parts and upgrades can be a challenge later on. Double Eagle's MWS-compatible GBBRs are arguably the most price-competitive you'll find at the moment and lots of parts can be shared across TM, including mag fill valves when they (not the gasket) leak. Upgrades are easy to do if you're reasonably technical. Vorsk has a AR-based GBBR due out next year (expected in the first half) with MWS mag compatibility but pricing and details on the hop unit, trigger box, etc are TBC. I'd guess these will be even more afforable than the DE MWS GBBRs. Another consideration you really ought to make is that now we're in much cooler if not colder temperatures, you should expect your running costs to go up. "Red" or "black" gas cost more money as green gas becomes less practical (if at all) in cooler temperatures. You can use hand warmers to keep your mags warm when you're running green gas but that's something you'll have to keep a close eye on to make sure you're not running a hot gun. Other expenses include lightweight bolts/carriers and with if you use higher pressure gas, there are NPAS and fixed power-down valves to throw into the mix.
-
Cannonfodder reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
VonGrimm reacted to a question on an advert: [PENDING] CAW MGL 40MM Grenade Launcher w/ six shells.
-
Enid_Puceflange reacted to a post in a topic: Is Discord a terrible alternative to forums or am I just using it wrong
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
Never taken out so is in brand new condition, only fired a few BBs at home to make sure it works. Comes with a bag, 5 mags, 6-24x50 illuminated scope (battery not included). Collection welcome but would be happy to post at extra cost. Box has been recycled but will be well packaged. Price includes PayPal fees.170.00 GBP
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
In good condition albeit for age related marks which actually give it a nice battle worn look. Will include a metal high cap mag (not pictured). Only safe and full auto work, semi will fire full auto. I’d imagine an easy fix if you know what you are doing. These retail for a high price so grab a bargain. Collection welcome but will post at extra cost. Original box has been recycled but will be well packaged. Price includes PayPal fees.150.00 GBP
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
In good condition albeit for a small number of marks on the upper, although not overly noticeable unless you are looking for them. A Gate Aster has been fitted but the performance is intermittent so probably just needs tweaking or just replacing if preferred. Comes with 2 mags and original box. Collection welcome but would be happy to post at extra cost. Price includes PayPal fees.130.00 GBP
-
Danhc92 reacted to a post in a topic: Propane gas
-
-
Time Left: 6 days and 20 hours
- FOR SALE
- USED
In great condition, comes with 2 mags. Just needs a new MOSFET as the original was replaced with a cheaper, low-end MOSFET that does not really work. Collection welcome but would be happy to post at extra cost. Original box has been recycled but will be well packaged. Price includes PayPal fees.120.00 GBP
-
GazzeG87 joined the community
-
Time Left: 6 days and 20 hours
- FOR SALE
- USED
Picatinny mounted scopecam 25mm lens with an optimum range of 12-40M. Case,3 batteries,charger,128GB card,flash back cable/remote with mount,leads,instructions and box. Easy to use and easy to edit.Latest software.Wifi.Resolution 1080P@60fps/1080P@30fps. The original battery will only charge in the unit not the charger due to some design differences,but they all work well. I have used it approx' 8 times with no issues,I'm only selling because a head/chest cam would suit my play better,I tend to shoot then hide(runaway),this is more of a sniper/static scope. Link to show the quality.Postage and fees included in the price as usual.80.00 GBP
- GB
-
Galvatron reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
Galvatron reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
adambeavis joined the community
-
ButcherBill reacted to a post in a topic: Ngal/Peq15 reproduction repairs
-
Don't worry, you're not alone. 🤝🏻
-
Anonymoose reacted to a post in a topic: Ngal/Peq15 reproduction repairs
-
Time Left: 6 days and 19 hours
- FOR SALE
- NEW
Gun is as new because i bought and plan to use it, but due to health issues it was never used Test fired in garden Great rof Fps 340 ish Great feel to it and great shooting position when held Nice sound Front hand grip that hold battery included 7.4lipo Very light forward metal gun with plastic folding stock What you get Gun like new as shown Two hi caps included Very long gun you need long arms lol Box has somecwear as been stored away for a while Post included in asking price paypal fee for buyer to pay165.00 GBP
- GB
-
Hello, I am guessing I should just give up on the slide release @Lyndication ??? Or do you know of any modifications I can do to fix it? Thanks
-
-
-
Galvatron reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
Macks airsoft dreamers of the week thread
Punisher3990 replied to Mack's topic in General Discussion
I will not relent on my comment spam on Anna. Think I have one on all thier ads now lol -
That will start eating into your pot metal slide even faster than the stock one does.
-
Hello, I am trying to make my ASG SP-01 very reliable. The slide catch does not work as it is a very common problem. I have seen this shadow 2 steel slide stop. https://shop.jkarmy.com/cl-project-steel-slide-stop-for-kj-shadow-2-gbbp-black.html Would this be compatible with my ASG SP-01? As I am getting a lot of opinions asking my tech friends, just wondering if anyone had already taken the leap as it is quite expensive. Many thanks
-
Wasn't/isn't there on for sale in the classifieds?
-
😭
-
https://www.dandbmilitaria.com/german-military-mg3-bipod-g1 - £50 Sadly AGM's are notoriously weak, putting a real bipod on will probably need some work though