All Activity

so, i have been neglecting to post updates for the past few months, so i will blast them all in one post.... i bought a laylax thread adapter to fit on my KWA beretta M93r from firesupport. (thank you @strykerles for the link). only downside is the threads are 14mm clockwise, and tracers are 14mm counter clockwise threads, but i was able to make an acetech fit through brute force XD then i bought the Umarex walther PPK and 2 spare mags from landwarrior and a Crusader silencer form airsoftworld to go with it along with it. currently trying to figure out a way to mount a tracer in the silencer without the inner barrel poking through and preventing tracer working (and without taking a hacksaw to it so i can use it without tracer at a later date if i choose) had to buy a new gun at AI500 in Flambards after i took a tumble and managed to snap my KWA Skorpion in two... so i bought the KWA Mac11 with spare mags... and it was the only gun i had with me at the event that didnt malfunction constantly.=/ i also bought a G&G ESG10 from my local surplus shop (who also sells some airsoft gear) for use at AI500, expecting more close quarters battles than i actually encountered, so it didnt get a lot of use.. plus i found the mag release is way too sensitive. whenever i had it slung on my back as a backup, it would constantly drop the mag, so it was mostly left at respawn to be used as needed, but i ended up just running the mac 11 all weekend after getting home from AI500, i bought a new reciever for the Skorpion from BZtactical, and have swapped the internals from the broken Skorpion, but now it needs fettling as i cant get the trigger to reset, and the valve knocker is sticky, so it wont fire at the moment =/ a shame, as i loved the little Skorp... evil little beastie deciding i wanted to display my guns, and consign many of the boxes to the loft, i bought a bunch of hookwall panels, brackets and hooks, which my brother and i mounted on the wall in my living room over the bank holiday weekend. need to order some different sized hooks and get another wall mount brracket as somehow had one missed out of my order, but they have been helpful when i contacted them. all bought from unishop.co.uk finally, i bought a WE Apache A5 from onlyairsoft along with a claw mount and 6 spare mags. to complete it, i bough a cheap red dot scope from Amazon and then a collapsible stock from KYairsoft which arrived today. hoping to run this tomorrow for the first time no pics at the moment as i cannot crop them down to meet the forum file size limits, and fed up of hosting the images from discord, only for them to stop working after a couple of days...

@Arek_ your thread is locked, you need to make a new one in the correct category: https://airsoft-forums.uk/classifieds/category/12-hpa/ & also consider whether putting your phone number in the public domain is wise ?, number redacted for now.

You have some lovely grips on that one James.

For sale £515 including postage and fees. In original box. Originally purchased in May 2023, has been skirmished well. Purchased from High Pressure Airsoft in Scunthorpe. hasn’t been used in over 6 months because I just haven’t played. Happy to provide additional photos. Unable to provide videos of shooting due to no air, Sorry. Please contact me on WhatsApp for additional information:

I won't lie, short range (3m for testing) accuracy is not great - from my testing maybe a 1.5" group at that range. It's understandably not as good as the 3.5 but I'm likely to add that back into the collection at some point, along with the upcoming 6" 🤞🏻

An Amorex style G series holster and Mag holder for my SSP18

You’re probably right mate, I have zero experience with co2 so literally have no clue. I’m just going by the description on the proact site about the bulbs, vs the thread size listed on the co2 site. Shame if it’s not right, 45g would have probably been a decent middle ground without much need to chop and change too frequently.

I'm going to say that from the picture those capsules are not the right thread size , you need M16 x 1.5 threads. The big 88g ones are the correct threads but are too long to fit in the box without modifying it. I've used adapters and smaller cartridges but found I went through them very fast .

I've used them a bunch of times and had no issues at all.

Don't know about the G36s, but my VFC MP5s didn't come with an NPAS. ☹️ Is it because they have the lugs to join them and the sides aren't flat? I cut all the lugs off my 55s mags and they're still a pain to get into most pouches.

Mine has a maple leaf crazy jet barrel , ML rubber and from memory a ML omega nub in it . Range etc is as good as any of my other GBBRs. Pretty sure I put a RATec NPAS in it (all my other WEs have them) TBH I very rarely game it now as I absolutely hate G36 mags ! not specifically the GBBR ones , just G36 mags in general . It does get loaned out though when folk want to try a GBBR for a day . I know lots of people have issues with WE parts quality , but I have never had a failure that wasn't my own fault on any of my WE GBBRs and I've got 6 of 'em.

I think no matter what you use to coat the artwork it'll wear off. Don't know how quickly, but it'll wear. For example, this gun's probably done 6-7 games and there's already anodizing wearing off the handguard.

https://www.usedairsoft.co.uk/air-guns/air-rifles_1/bolster-armouries-aegis-advanced-m4-aeg_i78585 1) Seller watched a YouTube video and thought spending more money ensures you get the best gun 2) Seller gets fed up after blowing £1500 on a custom RIF built to his spec and putting 5,000 BBs through it 3) Seller tries to sell his custom gun for £1200, thinking he's doing us a favour when: He's only reselling the gun minus VAT He had the gun built to his specifications so unless he finds that unlikely buyer who wants exactly what he has or something really close to his build, it's not even close to worth that/ 4) Seller gets ridiculed on a WhatsApp sales group and doesn't understand only putting 5,000 rounds through his gun doesn't mean it preserves the value he thinks. TLDR: Another Bolster Armouries special doesn't meeting the seller's expectations on trying to resell it

Hey guys, thanks for the thread it’s been super handy! Got my 249 and co2 box on the way (little scared about the horror stories you guys mentioned about WGC and UPS). I came across these 45g bulbs, I’m no expert but I think I found a thread somewhere about the size of the 67g bulbs and I think these have the same thread size 5/8-18UNF. If anyone knows more about co2 and if that’s right let me know, but I’m tempted to order some and give it a go once it all arrives https://www.discountcream.co.uk/threaded-5-8-inch-45g-co2-cartridge-1?utm_source=Google Shopping&utm_campaign=Google Shopping&utm_medium=cpc&utm_term=3842&gad_source=1&gad_campaignid=20513790673&gbraid=0AAAAAD3Qfu4DoWe3-oTBIK_sdAIUsvt5R&gclid=CjwKCAjwz_bABhAGEiwAm-P8Yc2HDQ_tLI-YOYLzPGe39gmgG2ZBxO7sU-HFJCdnmWfY7V1nplHEthoCo8EQAvD_BwE

More open top viper mag pouches to go on my belt as I was sweating buckets under my chest rig last week. 2x 1100 mah 11.1v batteries and a 1 point sling as I am taking a mate to airsoft for the first time tomorrow so need to be able to field both guns at the same time instead of choosing between them.