Classifieds rule 5 - adverts must have the username and date in photos. Adverts failing rule 5 will be deleted
All Activity
- Past hour
-
davidf reacted to an advert:
VFC HK416A5 GBBR
-
Should add some for rule against stunts like that. Something like posts dprice must be the actual price, if unsure post £1234. Wow that is belter, reckon he was ripped of if he paid that new, let alone trying to flog it for that. lol
-
BigAl reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
BigAl reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
Yeah, that could be the problem I mentioned of a short in the body. With the motor in place try pushing the main wire around to see if that makes a difference.
-
Red circles, the main screws to keep it into place. As soon as I go over half way into them, it again dies and nothing happens. Take them back out and sit motor in place and it’s fine. 😩
-
Hmm, that IS strange. What do you mean, 'screw it in half way'? What about if you pull it out slightly so the screw holes don't line up? Also try moving the wire with each trigger pull.
-
I don’t 😭 it’s now working when in the pistol grip position. But as soon as I screw it in half way it again stops. Won’t lie, it’s giving me a headache 🤕
-
That indicates there is a short in the body. Do you have a multimeter? If so check continuity between the body and each motor wire.
- Today
-
(13).thumb.jpeg.75ef132bc651ce6b889e9b7e50c71aeb.jpeg)
Time Left: 6 days and 22 hours
- WANTED
- USED
Stock ish saiga 12k + mags ideally NO HPA Have a GHK URGI 10.3 V2 fully upgraded internally (no mags) for trade if interestedAsk for price
-
Gunboat Diplomat reacted to a post in a topic:
If you could change the joule limit, would you?
-
Tommy_Rockstar joined the community -
Travel The World joined the community -
Austeyr reacted to a post in a topic:
Cybergun Thompson
-
No joy. when it’s out on its own no issue works. as soon as I attached it into the grip position nothing. I cant see any wires broken or anything
-
canystore joined the community -
Cannonfodder reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
Morning sir! I shall have a look! Thankyou for an option
-
Hawke joined the community -
Schorah joined the community - Yesterday
-
Gloucestertaxis joined the community -
cotswoldminibus joined the community -
Time Left: 6 days and 14 hours
- FOR SALE
- NEW
Victor optics 1-6 x24. Lvpo. Illuminated reticle, throw lever, clone geisellle high mount, 1 of the tabs on rhe mount is missing, but its still secure. £90 all in posted90.00 GBP
-
This advert is COMPLETED!
- FOR SALE
- USED
Mp9 gbb, fully working. Just serviced it, fully working, mag is gas tight. Holo has been shot but still works, just a few extra reticle. Has 14mmccw outer barrel and orginal outer barrel included. Originally 2 tone, most of the blue is off £140 all in posted140.00 GBP
-
Time Left: 6 days and 14 hours
- FOR SALE
- USED
Tm 416 delta ngrs, fully working. Used, couple of scratches. Dean's conversion, fps soft air piston and piston head, m95 spring, prommy barrel and begady bucking. 1 aeg epm1 mag, aeg mag adapter included. Last round sear broken (replacements are £6), this doesn't effect operation. £330 all in posted330.00 GBP
-
From what I remember (Cyma/Cybergun same pew?) I had to shim my Cyma Thompson screw as it was able to be tightened too much to the point it wouldn’t fire but if it was loose the grip was also loose. The same happened on the dodgy KA one I bought off of here a while back, to the point there was at least half a centimetre gap from receiver to pistol grip to get it to work. Not a guarantee it’s the same issue, obviously, but that was my issue so maybe the same for you?
-
There aren't any, you gotta import them
-
Impulse reacted to a post in a topic:
If you could change the joule limit, would you?
-
Yeah if that solves the problem try it for a while. It will loosen up but hopefully still do the job
-
I wonder what a none working SomoGear MK1 Ngal would bring ? Thank you to everyone who has replied to my original post I genuinely appreciate the advice and guidance.
-
Maybe im going mad, but really struggled to find a madbull adaptor that is in the UK
-
My god! Stress levels 100000x fitted the wood kit, a few amendments needed not an issue. Plug her in, ran a few mags no issues. Then just went dead. Took her apart, checked the fuse, checked the connections, no issues, took the motor out where it sits plugged in, Pew pew! Awesome! Screwed motor back into place, attached battery, NOTHING. Took the motor back out, tested again, ABSOLUTELY FINE. Put it back in position, DEAD. Did this numerous times. Am I missing something blindingly obvious!?
-
The more you use it, the Velcro will wear in and make it easier whilst still securing it better
-
Cheers for the reply all, to answer @EDcase, no I can't pull the mag out. I had some velcro strip laying around, have shoved some of that in the magwell, seems to have removed the play, bit too late to test atm though, might upset neighbours. Only trouble is it has made it a bit of a pain to get the mag out, but is something I can live with
-
Time Left: 6 days and 12 hours
- WANTED
- NEW
Looking for a p-10c, with extra mags if possible1,234.00 GBP
-
I think the 'click'is just the mag touching the top of the mag space. When the mag is in can you pull it out without pressing on the mag release? Rather than modify all the mags out might be possible to add a shim or JBWeld to the top of the mag catch
-
Austeyr reacted to a reply to a status update:
Lovely T2 1911 clone I’m selling on!
-
TommyPee reacted to a reply to a status update:
Lovely T2 1911 clone I’m selling on!
-
PopRocket123 reacted to a post in a topic:
Gun picture thread
-
Shotround joined the community -
Time Left: 6 days and 11 hours
- FOR SALE
- USED
Medium Price includes postage and fees.30.00 GBP
Leeds
-
Two possible solutions: 1. Find a hop unit with a somewhat longer feed tube. 2. Shim the top edge of the mag catch recess on the mags.
