All Activity
- Past hour
-
Time Left: 6 days and 23 hours
- For sale
- Used
For sale is this LCT AS-VAL AEG. I purchased it for my collection and have hardly fired it. Single shot only. Tested at 330 FPS. Slightly weathered, it has two holes at the top of the receiver for attaching a scope mount, should you wish to do so. It comes with the original box, a manual and one magazine. Rifle: £295 Shipping & pp fee: £18 Welcome to collect from Southwest London and save on shipping costs.£295
-
Time Left: 6 days and 23 hours
- Swap only
- Used
Want to trade my UMP as dont really use it anymore, Skirmished a total of 3 times since i got it brand new in December. Includes 6 mags, Optic and Foregrip. All mags are gas tight. Looking to trade for a GHK AK74u, VFC AK74 or VFC PPSh. Based in South England PO12 but frequently travel up to Gunman Bravo/Alpha.NO VALUE SPECIFIED
- GB
-
Killer Adam left Positive feedback for Ronin0033
-
Time Left: 6 days and 23 hours
- For sale or swap
- Used
Looking to sell my dytac ak 105 this has a polarstar kythera engine inside. It also has an upgraded cnc hopup, maple leaf rubber and I also think it has an upgraded barrel but im not 100% sure. Also comes with 3 hi cap mags 2 pmag style and a standard mag I have this posted on other websites just to be clear This was purchased 2nd hand as I thought it would be a cool addition to the collection but I just cant seem to fall in love with it hoping someone else can get some fun out of it! Would possibly consider trading for a GBB m4 noveske/tm with a few mags. Price is slightly negotiable doesnt have box and postage is included with original price.£500
Chester - GB
-
ButcherBill reacted to a post in a topic: Load-Out / Loadout Picture topic
-
ruskitseller reacted to a post in a topic: Forum issues and down time
-
After the debacle with my order getting nicked from my mailbox because Evri thought it would be a good idea to leave it super visible on a very busy street just down from the rough part of town, I disputed the order and the seller basically just said they'd send me the products again. It was only £10 worth of cheapo Aliexpress inserts, but they have now arrived and my lightweight setup is complete. It's super easy to swap between weapons with the inserts and if I like it I may splash out on a proper Haley Strategic D3CRM plus inserts instead of the Aliexpress clone stuff here (I also have some 9mm SMG inserts as well for my mp9, but I mostly snipe or DMR so I only included those in the picture). Full loadout allows for 4 spare pistol mags, 5 spare MWS mags / 4 spare m700 mags, and my rangefinder in the chest rig and belt (waiting on a kydex radio pouch that will go on the belt too), then spare BBs, gas, tactical snacks etc. in the backpack that can be quickly removed when needed. It's super easy to swap between my MWSs and m700s as all I need to do is swap out the chest rig insert, as the rifle mag pouches on the belt fit both, though the m700 mags are quite tight! So just waiting on the kydex radio pouch to complete this (baofeng w/ extended battery, cheapo milspec PTT and clone Invisio m3 earpiece is my comms setup), but considering the only guns I use nowadays are MWSs or m700s, I really like this setup as it's super easy to switch between them. It basically accommodates all the guns I use, even my Kar98k with its weird mags that I just put in the admin part of the chest rig. Testing it this weekend with my civvie setup (cheapo not-jeans and a flannel shirt) and the entire loadout fits in a single gun bag plus the backpack I'll be taking into the games themselves.
- Today
-
ButcherBill reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
ButcherBill reacted to a post in a topic: custom gbb
-
Time Left: 6 days and 22 hours
- For sale
- Used
Tokyo Marui VZ61 Scorpion Compact AEP SMG, comes with First Factory Picatinny Rear Stock Base mounted on the back with a sling swivel on it, however also includes the original stock so you have the choice of stocks, and also includes a Tokyo Marui 7.2V 500mAh Micro Battery. Has only ever been shot in the garden a handful of times and so is still in great condition. Price includes postage.£130
- GB
-
-
Time Left: 6 days and 22 hours
- For sale
- Used
Most of the parts you see here have either been brought and never used or removed from a new APFG MPX I purchased and tested before I upgraded it. Anything purchased will include postage. Offers welcome 1 - USED Kydex customs FNX45 mag carrier with utpo 2.25" shooter belt mount - £15 2 - USED complete APFG MPX bolt carrier minus the nozzle, included is a new reinforcement plate and a upgraded buffer pad - £30 3 - NEW RGW 4.5 inch APFG MPX tri lug and 14mm ccw outerbarrel - £20 4 - USED APFG MPX/MCX ambi charge handle - £25 5 - USED APFG MPX complete hop unit with bucking - £25 6 - NEW APFG VFC GBB grip - £15 7 - NEW APS ultra thin Fiber Optic Sight RMR for glock ( AC102 ) - £15 8 - NEW zenitco A1 picatinny sling mount repo - £5 9 - USED picatinny redot riser- £10 10 - NEW CNC aluminium MAXX o-ring seal aeg nozzle 21.50mm - £10 11 - NEW Maxx CNC Titanium Adjustable Air Seal Nozzle 19mm - 22mm aeg - £15 07833894017 for more info on anythingNO VALUE SPECIFIED
Kempston, Bedford, Bedfordshire - GB
-
Time Left: 6 days and 22 hours
- For sale
- Used
Valken ASL TRG AEG M4 BONEYARD, has seen some fair use, doesn't feed when shooting so likely just an issue with the hop unit, the gearbox also doesn't sound the healthiest however that may have been due to the battery I was using, but worth a general service anyway. Comes with x2 spare Nuprol N-Mag 30/125rnd Mid-Cap Magazines. Price includes postage.£80
-
-
Time Left: 6 days and 22 hours
- For sale
- Used
G&G UMG AEG SMG BONEYARD, when connected to a battery the motor clicks however there is no response from the gearbox, likely meaning the gearbox has locked up, and is also missing the small pin that holds the bolt release in hence the electrical tape holding it on. Price includes postage.£100
Enfield, Middlesex - GB
-
Time Left: 6 days and 22 hours
- For sale
- Used
All 9 for sale, serviced 2 weeks ago by myself with no leaks. all v2.0 3 black 6 tan Happy to do knock money off multiple magazines and collection. 3 more black are also available however need new Seals/baseplates. Happy to provide more info for anyone interested. 2x Jaeger speed loader adapters also available for these. £55 each inc postage buyer covers PayPal fees.£55
-
-
Time Left: 6 days and 22 hours
- For sale
- Used
Umarex Glock 18C Gas Blowback Pistol, comes with a WE Glock magazine and a repro Surefire X300 Weapon Light (battery latch doesn't close unless it's on the pistol, however this doesn't affect function). Pistol has seen some light use, otherwise is still in great condition. Price includes postage.£120
Enfield, Middlesex - GB
-
-
Time Left: 6 days and 22 hours
- For sale
- As new
Bolster Tuned CYMA CM.041 SMG-5 AEG H, has a Magpul MP5 SL Handguard installed and comes with a cheap red dot sight. The gun is currently set to safe-semi-binary, however I can change it back to full auto/burst if you'd like. Upgrades include things like a Gate Aster mosfet, a Warhead 27k Brushless motor, etc. See here for information on the upgrades included - https://www.patrolbase.co.uk/cyma-cm-041-smg-5-patrol-base-x-gate-aster-upgraded-edition Has only been used a handful of times and so is still in great condition. Price includes postage.£375
Enfield, Middlesex - GB
-
custom gbb workshop TRW M79 Grenade Launcher Pirate Gun King arms airsoft
-
ruskitseller left Positive feedback for peter207
-
timski reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
timski reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
timski reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
Adolf Hamster reacted to a post in a topic: Forum issues and down time
-
The 'What have you just bought' Thread
ButcherBill replied to Cameron364's topic in Guns, Gear & Loadouts
No need to be jealous, it's a cheap Mac-10, it was a replacement for a two tone one I rattle canned & did a shit job of(it's hiding in my shed somewhere). Got a new gearbox and an ejection port cover for my M16A3 today, the Orion gear box was working fine but the join in the red wire prevented the motor sitting properly in the grip, I'm sure the rif was working before it was dismantled for posting but I'm damned if I could get the motor sitting properly. I'm no tech but it looks to me that this gearbox has been worked on, in fact I know it has as I can see through the spring access that teeth have been removed from the gear/s. -
Time Left: 6 days and 21 hours
- For sale or swap
- Used
G&G M4 Combat Machine [CM16L] - Polymer lightweight M4 with some internal upgrades FPS: 285.2 on .28g / 1.05j (~337 on .2g, no hop. Or ~325-330 with hop set for .28g) Serviced and Upgraded to sell Rear-wired to Deans New; ZCI Poly rotary hop unit Maple Leaf Macaron 60 w/XT Omega Nub FMA 107mm silencer ZCI 400rd Hi cap Flash mag Also comes with; Iron sights Grip bipod grip £140 Collected £155 Posted Optional: Tan Rifle bag - £15 great condition, other than one of the main compartment zippers is off the track, still closes with the other one Any questions, feel free to ask£140
Doncaster, South Yorkshire - GB
-
Man I'm way too Scottish to spend that on an end cap
-
Macks airsoft dreamers of the week thread
BYRNEMORGAN52 replied to Mack's topic in General Discussion
Yeah thats about right honestly. Missed the spitfire because I'm still just baffled by the pistol grip. -
Problems uploading photos and general forum issues.
ButcherBill replied to mightyjebus's topic in Forum Feedback
Every other week? only twice to my knowledge, both recently tbf but please remember... patience is a virtue. -
Time Left: 6 days and 21 hours
- For sale
- As new
Almost new, in great shape. I have installed a longer handguard to recess the silencer which has room for a tracer. Comes with the foregrip and pts enhanced grip. Extended battery cover and original mid cap mag Great quality with maple leaf hop and inline mosfet. P&p is £15 via pf48 or i can drop off in the Manchester area. Payment via PayPal Cheers£300
Manchester - GB
-
ButcherBill reacted to an advert: WANTED - VFC M16A1
-
ButcherBill reacted to a post in a topic: Forum issues and down time
-
Time Left: 6 days and 21 hours
- For sale
- As new
As new, never fielded. Illuminated and very clear optic. This will come with both the tan qd mount and the original black mount with the picatinny mounts for red dots. Comes with the lens caps and a honeycomb lens protector. The zoom ring is stiff as it is new. All in p&p and fees £95. Payment via PayPal Cheers£95
Manchester - GB
-
Am I just way out of touch with real steel prices or is £50 for the end cap of a torch the pisstake I think it is? https://airsoft-forums.uk/classifieds/item/66331-genuine-surefire-z68-tailcap-2-available-£50-each-£80-for-both/ £165 for a Spitfire also kinda on the high side ngl
-
The 'What have you just bought' Thread
Tank423 replied to Cameron364's topic in Guns, Gear & Loadouts
Perfect time to add one to the collection that's come from a collection and had 4 mags through it total 😉 Absolutely not jealous of the Mac 10 at all... I have a gas tube, bit pricey as it comes with a free DSR-1 😂