Wegalaxy Posted May 16 Posted May 16 Hello, I have had a new gear set in my ARP 9 which is a 1/14. These are high speed gears and they are in my ARP 9 with a gate aster installed. After I had them installed I fired 200 rounds on full auto bursts and semi on 11.1 lipos. Then nothing, The piston just stopped and a bb was waiting at the end of the nozzle. (I removed the BB). Now it doesn't beep when I plug in the battery and the aster just flashes red. It had the stock gears in and worked fine before the install. What has gone wrong? Any ideas? Thanks
Supporters Rogerborg Posted May 16 Supporters Posted May 16 Yup, always check the simple stuff first: connectors, and wire continuity: a basic multimeter will pay for itself the first time you use it to find a wiring fault.
Wegalaxy Posted May 16 Author Posted May 16 Thanks. I will have a look. Just a quick question. Using 11.1 lipos with 1/14 gears. Will this effect the gears life span in the long run? Are you only supposed to use 7.4s with 1/14? Thanks
Supporters Lozart Posted May 17 Supporters Posted May 17 16 hours ago, Wegalaxy said: Thanks. I will have a look. Just a quick question. Using 11.1 lipos with 1/14 gears. Will this effect the gears life span in the long run? Are you only supposed to use 7.4s with 1/14? Thanks Bad shimming and/or timing will make more of a difference. That and an over active Extensor indicis. Colin Allen 1
Recommended Posts