Pivic Posted April 10, 2021 Share Posted April 10, 2021 Hi guys, new to airsoft, recently bought Double eagle M904G and I want to improve the range. I guess I should change rubber and tensioner. Are all AEG rubbers and tensionirs compatible for this replica? I thought to go with maple leaf super macaron 70° Do you recommend something else and also which tensioner would be good. Maybe maple leaf omega? I have 1.3J with 0.3bb if that means anything to you. Note: I am not from UK. Link to comment Share on other sites More sharing options...
Shamal Posted April 10, 2021 Share Posted April 10, 2021 38 minutes ago, Pivic said: Hi guys, new to airsoft, recently bought Double eagle M904G and I want to improve the range. I guess I should change rubber and tensioner. Are all AEG rubbers and tensionirs compatible for this replica? I thought to go with maple leaf super macaron 70° Do you recommend something else and also which tensioner would be good. Maybe maple leaf omega? I have 1.3J with 0.3bb if that means anything to you. Note: I am not from UK. Hi and welcome @Pivic. I expect someone on here will answer your query very soon. Have fun with your new hobby 👍 Regards Link to comment Share on other sites More sharing options...
Supporters Lozart Posted April 13, 2021 Supporters Share Posted April 13, 2021 On 10/04/2021 at 11:38, Pivic said: Hi guys, new to airsoft, recently bought Double eagle M904G and I want to improve the range. I guess I should change rubber and tensioner. Are all AEG rubbers and tensionirs compatible for this replica? I thought to go with maple leaf super macaron 70° Do you recommend something else and also which tensioner would be good. Maybe maple leaf omega? I have 1.3J with 0.3bb if that means anything to you. Note: I am not from UK. Hi! I'd say that 70deg might be a bit hard, maybe go with the 60deg. Also you will need the Omega tensioner nub as it's designed to work with the design of the Maple Leaf rubber. Other than that it's a pretty standard V2/M4 style hop unit. Link to comment Share on other sites More sharing options...
Mikewhh Posted April 25, 2021 Share Posted April 25, 2021 You could try a modify flat hop set Link to comment Share on other sites More sharing options...
38super Posted April 26, 2021 Share Posted April 26, 2021 This is what I've done to my M904G ZCI rotary hop chamber ZCI 260mm inner barrel Maple Lear MR bucking 60 degree silicone Omega nub SHS double o ring nozzle (21.4mm) First time I've done anything like this so I don't have anything to compare it to. I was getting pretty much 100% hit rate at 35m but that dropped off hugely at 40m. Bad wolf 0.3g bb's. No idea what I should be getting. Hop seemed to be very sensitive but again no experience of what it should be like. I've had to fit an M95 spring as it was doing 370fps with .2's so too hot for the UK. Still a work in progress as I need to polish the barrel properly and haven't tested the accuracy with the new spring. I'll also be trying Geoff's BB's to see if there's a difference. Link to comment Share on other sites More sharing options...
Pivic Posted April 30, 2021 Author Share Posted April 30, 2021 I changed only Rubber to super macaron 60° and it increased range pretty good. Omega nub doesn't fit at all!!!!! Even after cutting its edges, it still misfeeds and spits double shots, so I returned old red nub until I find one which will fit Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.