Tactical Pith Helmet Posted March 18, 2021 Share Posted March 18, 2021 Anyone have an clue if the Tokyo Marui G3 SELECTOR LEVER SWITCH part G-14 would fit a JG? The tiny machine screw that sits in the shaft of the pin that the selector lever sits on has snapped off, and I have nothing small enough to remove it. I'd need about a 0.75 mm screw extractor to have a chance I think. Smallest I can find is 2.5mm. I don't think that I even have a tap that small. Drilling the broken screw out and helicoiling seems a bit damn much too, if they are available in that size. Link to comment Share on other sites More sharing options...
Supporters Lozart Posted March 19, 2021 Supporters Share Posted March 19, 2021 10 hours ago, Tactical Pith Helmet said: Anyone have an clue if the Tokyo Marui G3 SELECTOR LEVER SWITCH part G-14 would fit a JG? The tiny machine screw that sits in the shaft of the pin that the selector lever sits on has snapped off, and I have nothing small enough to remove it. I'd need about a 0.75 mm screw extractor to have a chance I think. Smallest I can find is 2.5mm. I don't think that I even have a tap that small. Drilling the broken screw out and helicoiling seems a bit damn much too, if they are available in that size. Do you mean this part? https://www.airsoftclub.gr/en/product/g3-selector-lever-2/ Link to comment Share on other sites More sharing options...
Speedbird_666 Posted March 19, 2021 Share Posted March 19, 2021 Fire-support states that the JG lever is compatible with TM, so in theory a TM lever should work with a JG. But this is airsoft.....nothing ever quite 'works' between manufacturers as it is supposed to. Link to comment Share on other sites More sharing options...
Tactical Pith Helmet Posted March 19, 2021 Author Share Posted March 19, 2021 Thanks fellas. I'll get that JG part Loozart and a spare too I think. You are right Speedbird, in airsoft just because it should, doesn't mean that it will... Link to comment Share on other sites More sharing options...
Hatchet Posted March 20, 2021 Share Posted March 20, 2021 Could you superglue a pin to it to unscrew? Other than that, if you're going to replace it you might want to consider trying to source the selector from the G3 SAS since it's one sided (like M16, MP5) and doesn't have the axle so you avoid this whole issue in future. Link to comment Share on other sites More sharing options...
Tactical Pith Helmet Posted March 20, 2021 Author Share Posted March 20, 2021 Cheers mate. I'll have a look! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.