strykerles Posted October 3, 2020 Share Posted October 3, 2020 As above, after firing the trigger seems to stick back and won't return 75% of the time. Ive cleaned and lubed the mech but it hasn't changed. Also the slide won't lock back on empty, slide doesn't seem to go back far enough Starting to regret getting this gun as I've had nothing but problems since I first used it where it performed great 20201003_160448.mp4 Link to comment Share on other sites More sharing options...
Keithlag Posted October 4, 2020 Share Posted October 4, 2020 is the hammer forward at the start of the video ? Link to comment Share on other sites More sharing options...
strykerles Posted October 4, 2020 Author Share Posted October 4, 2020 4 hours ago, Keithlag said: is the hammer forward at the start of the video ? I'm starting to think it's to do with the fact the slide doesn't travel all the way back to force the hammer down. If I manually pull the hammer back the trigger moves is this to do with the decocker? I'm not very clued up on these tbh Link to comment Share on other sites More sharing options...
Keithlag Posted October 4, 2020 Share Posted October 4, 2020 it has not got a decocker but has got a double stage trigger. if you pull back the slide slowley is it catching on the hammer ? what gas are you using ? Link to comment Share on other sites More sharing options...
Schnakey Posted October 4, 2020 Share Posted October 4, 2020 That definitely has a decocker. Looks to be functioning normally but low on gas? Trigger should be back/in single action for any subsequent shots to your first DA shot. Link to comment Share on other sites More sharing options...
Keithlag Posted October 4, 2020 Share Posted October 4, 2020 28 minutes ago, Schnakey said: That definitely has a decocker. Looks to be functioning normally but low on gas? Trigger should be back/in single action for any subsequent shots to your first DA shot. please show me a decocker on a m9 Link to comment Share on other sites More sharing options...
hitmanNo2 Posted October 4, 2020 Share Posted October 4, 2020 35 minutes ago, Keithlag said: please show me a decocker on a m9 Link to comment Share on other sites More sharing options...
Schnakey Posted October 4, 2020 Share Posted October 4, 2020 All the TM ones since the M9a1 have had a working decocker. My Albert (which is identical to the OP's) has a working decocker as it's M9A1 based. Link to comment Share on other sites More sharing options...
EDcase Posted October 4, 2020 Share Posted October 4, 2020 The WE also has functioning decocker Link to comment Share on other sites More sharing options...
strykerles Posted October 5, 2020 Author Share Posted October 5, 2020 22 hours ago, Keithlag said: it has not got a decocker but has got a double stage trigger. if you pull back the slide slowley is it catching on the hammer ? what gas are you using ? using WE green gas with proper marui mags, the slide just doesn't go back far enough but goes back fine manually could always try red gas.......................... 😂 Link to comment Share on other sites More sharing options...
Schnakey Posted October 5, 2020 Share Posted October 5, 2020 Mine is quite reluctant to cycle well unless on green gas too. Think it's extra pressure from the different hammer on the Albert. Could try a WE mag, they have a less convoluted gas router so put out a little more poke. Link to comment Share on other sites More sharing options...
strykerles Posted October 5, 2020 Author Share Posted October 5, 2020 18 minutes ago, Schnakey said: Mine is quite reluctant to cycle well unless on green gas too. Think it's extra pressure from the different hammer on the Albert. Could try a WE mag, they have a less convoluted gas router so put out a little more poke. I tried this as I have a WE samurai edge but it doesn't like the mags and won't fire properly Link to comment Share on other sites More sharing options...
Schnakey Posted October 5, 2020 Share Posted October 5, 2020 May be a lack of mass in the hammers then, mine just laughs at 144a. Link to comment Share on other sites More sharing options...
strykerles Posted October 5, 2020 Author Share Posted October 5, 2020 could the recoil spring be the culprit and stopping the slide travelling enough? Link to comment Share on other sites More sharing options...
Schnakey Posted October 5, 2020 Share Posted October 5, 2020 I saw a chap on Reddit had an issue with the weight in the front of the slide moving, could be that? Spring feels the same as my samurai edge. Link to comment Share on other sites More sharing options...
strykerles Posted October 6, 2020 Author Share Posted October 6, 2020 after taking it apart and putting it back together I'm 90% sure it's the slide not travelling back far enough to load the next bb, whichever gas i use it makes no difference If I manually rack the slide it fires every time Link to comment Share on other sites More sharing options...
BigStew Posted October 6, 2020 Share Posted October 6, 2020 Is the recoil spring guide sitting properly. That can affect slide travel. Link to comment Share on other sites More sharing options...
Keithlag Posted October 6, 2020 Share Posted October 6, 2020 On 04/10/2020 at 21:32, hitmanNo2 said: i stand corected i have the tm m92f that don`t do that Link to comment Share on other sites More sharing options...
strykerles Posted October 6, 2020 Author Share Posted October 6, 2020 3 hours ago, BigStew said: Is the recoil spring guide sitting properly. That can affect slide travel. Yes it's sitting correctly Link to comment Share on other sites More sharing options...
BigStew Posted October 8, 2020 Share Posted October 8, 2020 only thing i can think of is the trigger return spring or the trigger bar return spring. Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.