6sh117 Posted August 23, 2020 Posted August 23, 2020 Hello,So my problem is: I bought a brand new airsoft LCT SR3M. I took gearbox out to change for a softer spring. This gun doesn't have quick spring change system so I had to open it. I have opened gearboxes before and everything looked fine for me?* when I put all that back together. I also installed a SHS long aluminium nozzle.When i started shooting, gun acted strangely, like nozzle delaying and so. At first semi shot bullet didn't shot out, after that all semi shots were fine. When i switched to a auto then there were a feeding problems. Nozzle were in different positions in hopup chamber? maybe there were even a double feed or times when bullet didnt flew out at all..Before spring changing, all were fine like normal gun should act. Magazine is brand new aswell and feed auto shots fine. using 9,6 volt battery. 20g bbI'm not a really expert but something to do with bad aoe or do i have install a delay chip?
DerDer Posted August 23, 2020 Posted August 23, 2020 Was the LCT nozzle the same length as the SHS nozzle you replaced it with?
6sh117 Posted August 23, 2020 Author Posted August 23, 2020 LCT nozzle is maybe 1-2 mm shorter than a SHS one
6sh117 Posted August 23, 2020 Author Posted August 23, 2020 Alright, I will install the LCT one back, and will try to shoot again. But so far, really thanks about that!
EvilMonkee Posted August 24, 2020 Posted August 24, 2020 Why change the nozzle anyway? Leave it alone till something breaks.
Speedbird_666 Posted August 24, 2020 Posted August 24, 2020 46 minutes ago, EvilMonkee said: Why change the nozzle anyway? Leave it alone till something breaks. This 1000%. If it aint broke...
Supporters Adolf Hamster Posted August 24, 2020 Supporters Posted August 24, 2020 1 hour ago, EvilMonkee said: Why change the nozzle anyway? Leave it alone till something breaks. agreed, the whole point of a higher end manufacturer like lct is that odds are the stock nozzle is probably just fine. i know i'm planing on some lct tinkering in the future but nozzle changing ain't part of it....
DerDer Posted August 24, 2020 Posted August 24, 2020 Pretty much as above, try placing the old part back in and see how you get on. From my experience the LCT parts are very decent inside the gearbox. Find the barrel and the motor can be shoddy but the LCT gearbox is a performer.
EvilMonkee Posted August 24, 2020 Posted August 24, 2020 Owning any number of LCT, generally the only thing I do to mine is swap out the hop rubber.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.