Stu000000 Posted July 17, 2020 Share Posted July 17, 2020 I have my spare m14 that’s been lying about and not fired for 9+ years.. Thinking of carrying out some sort of EBR conversion? Never done anything like this before and ideas and pointers that’s good to know? Attached the only picture of it I have on the wall cheers stu! Link to comment Share on other sites More sharing options...
DerDer Posted July 17, 2020 Share Posted July 17, 2020 One thing to consider if the sheer heft of the thing. The first word to come to mind when I think of it is heavy. It can be disheartening to put money and time into a project and find it just doesn't gel with you. If you have handled one in the past, then you can pretty much discard my musings. Link to comment Share on other sites More sharing options...
AK47frizzle Posted July 17, 2020 Share Posted July 17, 2020 There aren't really any ebr conversion kits lying around, assuming it's for an aeg. There's a G&P version but that's rare and uber expensive. You're literally better off buying a cyma ebr. Link to comment Share on other sites More sharing options...
BigStew Posted July 17, 2020 Share Posted July 17, 2020 47 minutes ago, AK47frizzle said: There aren't really any ebr conversion kits lying around, assuming it's for an aeg. There's a G&P version but that's rare and uber expensive. You're literally better off buying a cyma ebr. Pretty much this. Unless you can find a bone yard EBR. Link to comment Share on other sites More sharing options...
PureSilver Posted July 17, 2020 Share Posted July 17, 2020 @AK47frizzle is spot on. You can get replica EBR chassis for the WE M14 from $450 for the chassis alone up to $1,400 for a fully upgraded gun, but the only AEG conversion kits I'm aware of were the rare, long out of production and eye-wateringly expensive G&P kits for the TM-and-clone M14s. You're going to be better off buying a whole new AEG that comes with the chassis. The good ones are the G&Gs from about $500 on up, the cheap ones are the CYMAs from about $225 on up. Link to comment Share on other sites More sharing options...
Stu000000 Posted July 18, 2020 Author Share Posted July 18, 2020 Nice one cheers for the reply folks! It’s currently sitting in bits now so I’ll clean it up and maybe just turn it into a sniper and run it with a bi pod, decent barrel and scope! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.