Jump to content

TM NGRS 416 issue


THE FNG
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Posted

I have an issue with my 416.

With the magazine out, the gun cycles fully, recoil works, no issue.

Insert mag, gun may fire a few rounds and then it stops as if the mag is empty and the bolt catch is locked in place, but it won't release if you push it.

Appreciate that this one is a bit vague and could be anything. From what I've seen, the wiring is in order, as is the battery.

 

Edit - mags work flawlessly in my scar l

  • Supporters
Posted

Check the little lever inside the magwell is centred, sounds like it's jumping and hitting the magazine which is stopping it from coming down. 

Posted

 Quick photo of it in situ, look okay?

15283054322421187634744301267852.jpg

  • Supporters
Posted

Stock or up-graded ? 

Posted
2 hours ago, Druid799 said:

Stock or up-graded ? 

Only upgrade is an m95 spring, all else is stock

Posted
14 hours ago, THE FNG said:

 Quick photo of it in situ, look okay?

15283054322421187634744301267852.jpg

 

 

as @jcheeseright said, it look centered but it could also be the annoying fiddly spring that's slightly outside the gearbox itself! I ended up having to give it a bit of a stretch out when mine did this exact same thing.

  • Supporters
Posted
13 hours ago, THE FNG said:

Only upgrade is an m95 spring, all else is stock

I’m inklined to go with the lads saying it’s to do with the ‘wee’ spring as well .

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...