BenBurnside Posted May 30, 2018 Posted May 30, 2018 When I pull the bolt back on my Well MB01 it is extremely stiff and requires a lot of force to even get it moving. Once I get it to slide its still very stiff and seems to make a grinding noise I have upgraded it internally slightly. I think I might need a new cylinder to fix the issues but I’m not sure. Hope someone can help All my upgrades: with ASPUK metal piston and spring guide, 90 degree trigger sear, 150 spring, and a new piston head and o-ring.
Root Admin proffrink Posted May 30, 2018 Root Admin Posted May 30, 2018 My guess would be that you've assembled your cylinder incorrectly or have put the spring retention pin/set pin (from the trigger mechanism) back incorrectly during reassembly. Look up a video and be sure that the set pin is correctly placed. Looks like this:
Supporters M_P Posted May 30, 2018 Supporters Posted May 30, 2018 Sounds like Proffrink is right, take it apart and put it back together again, making sure all is in the right order, 9 times out of 10 that fixes these kind of issues
Georgeturner2001 Posted May 30, 2018 Posted May 30, 2018 Extremely stiff and requires a lot to get it moving....sounds like my grandad!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.