Emergencychimps Posted July 7 Share Posted July 7 Check which generation mags they are (assuming they're tm stanags). The ones I had (generation 3) were picky about which gas nozzle I could load from, plastic worked but certain metal ones didn't. Is the MWS stock? Is it brand new? Link to comment Share on other sites More sharing options...
Austeyr Posted July 7 Share Posted July 7 (edited) 11 hours ago, Emergencychimps said: Check which generation mags they are (assuming they're tm stanags). The ones I had (generation 3) were picky about which gas nozzle I could load from, plastic worked but certain metal ones didn't. Is the MWS stock? Is it brand new? Gen 3, using Nuprol 2.0 with the metal nozzle. Stock except BavTac 140% return nozzle springs Yeah, first time running it since I got it 4 odd months ago When I filled the mags at home they was weighing in at 460 - 465g (No BB's) and after the first time all 4 mags did what they did, I purged them all and ran into the same issue afterwards Edited July 7 by Austeyr Link to comment Share on other sites More sharing options...
SSPKali Posted Wednesday at 20:38 Share Posted Wednesday at 20:38 (edited) Had a couple of odd failures recently - broke a nozzle guide (think it was AG) snapped off the front part that sits in the BCG and guides the nozzle. Not surprised AG item broke so popped a spare GM one on. That failed tonight when I was checking the FPS. Again snapped in the same place! Fitted my last spare, a G&P one, but took a small round file and added a radius to the inside corner where the others had failed. Now have a couple of Unicorn ones on order from JKArmy but will probably never need them 😂 Anyone else had this? Nozzle springs, nozzle feed pokey bit, hell even the tiny screw through the nozzle holding the internals in….just never seen one of these fail before! UPDATED: The Guns Modify failed at the sharp corner and cracked there (circled red areas) then slowly got worse and worse over next X shots as shown by the rough, almost tree ring lines, area across the middle 80% The Angry Gun one (grey) broke rapidly (as evidenced by lack to brassing / tide marks as on the GM one) and appears to have failed at the inclusion / void highlighted. AG had radiused the corners…but then used shitty plastic Edited 13 hours ago by SSPKali Evidence / pics Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now