Samuelol Posted November 18, 2016 Share Posted November 18, 2016 Hi guys, So my current HPA DMR is pictured below. Whilst it may be a little too operatorrr for some, I really enjoy it. Thoughts are welcome! I'm also putting together a more lightweight, mixed black/dark earth, full magpul version of this DMR. I will be using the same magpul lower with HPA/flat-hop/orga internals but will be swapping out: Stock for - Magpul PRS sniper stock in dark earth Grip for - Whichever dark earth grip I fall in love with... Currently the G&P sniper grip. I know, not magpul! But I love it! Spikes tactical rail for - Magpul moe rifle length handguard in dark earth. Anyone know if I would have any compatibility issues with my G&P VTOL upper? I'd like to keep my OCC suppressor for the angular goodness my diet so desires but I'm unsure as to whether I can free float my barrel/sink my suppressor, like I have in my current build but in the Magpul moe handguard? Again, any compatibility advice is awesome guys. I'm most concerned about the diameter of the suppressor as it's.. rather thick! I will probably use the Magpul setup as more of a 'battle rifle', whatever that means... And so would most likely drop it down sub 350fps. Considering the FPS drop, I'm eager to have an alternate optics option! So, OCC octagonal 4x9 for - who knows!? I really like the idea of an Aimpoint/Magnifier setup.. but I'd rather not have to throw quite as much cash as an aimpoint requests! Google, in it's vast and often questionable wisdom, has many suggestions but I'll always draw my final conclusion from you guys. Any suggestions chaps and chirls? I'd like a fair quality aimpoint clone and suitable 4x magnifier fo the reserved budget of around £150. I'd say that's the upper limit. I have attached a reference image regarding the optic setup I am eager to emulate. I enjoy the somewhat 'seamless' look. Whilst the magnifier is up, it almost blends into a solid scope. Advice in regards to how to achieve such an effect, which will most likely require a method of leveling the two optics, is again gratefully received. And that's that! I really would appreciate thoughts regarding my current and future build, good for bad. Any advice regarding the issues I have posed is also seriously appreciated.. As are you, for reading this positively wall like wall of text... Cheers guys! Big love. Link to comment Share on other sites More sharing options...
Guest PT247 Posted November 18, 2016 Share Posted November 18, 2016 Holosun. Link to comment Share on other sites More sharing options...
GiantKiwi Posted November 18, 2016 Share Posted November 18, 2016 Unless you already have the PRS stock, get something else. You'll never find one second hand airsoft version (I had one a while back, and sold it for twice it's original price, before i'd even listed it for sale) and the Magpul USA one will come to about £300. Link to comment Share on other sites More sharing options...
Samuelol Posted November 18, 2016 Author Share Posted November 18, 2016 Thanks both. Kiwi, are you able to direct me as to where I'd get one from the states. If that's what it'll cost, that's what it'll cost. Thanks again guys. Link to comment Share on other sites More sharing options...
Guest PT247 Posted November 18, 2016 Share Posted November 18, 2016 Thanks both. Kiwi, are you able to direct me as to where I'd get one from the states. If that's what it'll cost, that's what it'll cost. Thanks again guys. just google it, there are many many places you can get a real steel version if money isn't an issue. Link to comment Share on other sites More sharing options...
Samuelol Posted November 18, 2016 Author Share Posted November 18, 2016 Cheers bud, I didn't doubt that. I wasn't aware that I'd have no issues with a real steel version. Link to comment Share on other sites More sharing options...
Alpha.s1 Posted November 18, 2016 Share Posted November 18, 2016 Just to save you a heap of cash, i came across a prs replica ish, by ics http://shop.ehobbyasia.com/ics-uksr-sniper-stock-for-m4-sliding-tube.html#.WC-T8rTfWhA Link to comment Share on other sites More sharing options...
Guest PT247 Posted November 18, 2016 Share Posted November 18, 2016 just run a milspec buffer tube Link to comment Share on other sites More sharing options...
Samuelol Posted November 18, 2016 Author Share Posted November 18, 2016 Interesting! Struggling to see whether they make it in dark earth but it's a potential for extreme cash savings! Link to comment Share on other sites More sharing options...
Alpha.s1 Posted November 19, 2016 Share Posted November 19, 2016 If its more the look than anything, then a good krylon paint job can sort that, if cash isnt an issue as pts247 said, then go real, though at a third of the cost even after import, duties and possible custom charges, and the spraypaint, i'd probably go for the ics. That being said this is your build, so do what you want with it, just thought i'd share that potential saving with you Link to comment Share on other sites More sharing options...
GiantKiwi Posted November 19, 2016 Share Posted November 19, 2016 Thanks both. Kiwi, are you able to direct me as to where I'd get one from the states. If that's what it'll cost, that's what it'll cost. Thanks again guys. Better yet, I can direct you to a place in the UK, just found it for £280 - http://www.blackrifle.co.uk/Magpul-PRS-p/mag-prs.htm If its more the look than anything, then a good krylon paint job can sort that, if cash isnt an issue as pts247 said, then go real, though at a third of the cost even after import, duties and possible custom charges, and the spraypaint, i'd probably go for the ics. That being said this is your build, so do what you want with it, just thought i'd share that potential saving with you ICS one is for AEG's only, OP is building off what appears to be a G&P WOC (GBBR) Link to comment Share on other sites More sharing options...
Samuelol Posted November 19, 2016 Author Share Posted November 19, 2016 If its more the look than anything, then a good krylon paint job can sort that, if cash isnt an issue as pts247 said, then go real, though at a third of the cost even after import, duties and possible custom charges, and the spraypaint, i'd probably go for the ics. That being said this is your build, so do what you want with it, just thought i'd share that potential saving with you Damn good shout mate thank you. I may well go down that rate. The donor gun under all this junk is an AEG G&P Sentry so I don't think I should have any issues. Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted November 19, 2016 Supporters Share Posted November 19, 2016 With an AEG base gun you're going to have a LOT of issues. A real PRS stock will not go on to your gun, the ICS one probably isn't the right size either. Link to comment Share on other sites More sharing options...
Samuelol Posted November 19, 2016 Author Share Posted November 19, 2016 Why does this stock hate me so.... What makes you think the ICS wouldn't fit mate? Link to comment Share on other sites More sharing options...
Alpha.s1 Posted November 19, 2016 Share Posted November 19, 2016 By the sounds of it, to use either prs stock , you'd have to replace your buffer tube, which buffer tube you need and how easy it is to replace i honestly have no idea, though i am following with interest as i'd like to fit the ics to a non ics rifle in the near future As to why the stock hates you so much, its quite simple, its different therefore is stupidly difficult to get hold of or fit Link to comment Share on other sites More sharing options...
Supporters ImTriggerHappy Posted November 19, 2016 Supporters Share Posted November 19, 2016 http://www.snitactical.com/index.php?main_page=advanced_search_result&search_in_description=0&zenid=70a09dec1ce3e303f43c9a0ddcde8031&keyword=Magpul+prs&x=0&y=0 Link to comment Share on other sites More sharing options...
Samuelol Posted November 19, 2016 Author Share Posted November 19, 2016 I had also found that but I'm very uncomfortable about it. The stock level seems unrealistic and just... Too good to be true. Anyone have any experience with them? Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted November 19, 2016 Supporters Share Posted November 19, 2016 They don't seem to have ANYTHING out of stock. I'd be sceptical about that. As for why an ICS won't go onto a G&P, they're made to completely different specifications and the dimensions are normally different. Link to comment Share on other sites More sharing options...
Root Admin proffrink Posted November 19, 2016 Root Admin Share Posted November 19, 2016 I've used them before for some stuff - it got here but it was wrong and their service was horrible. I'd avoid. Link to comment Share on other sites More sharing options...
Supporters ImTriggerHappy Posted November 20, 2016 Supporters Share Posted November 20, 2016 A few times with no issues personally but maybe I was just lucky. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.