GreenDragon Posted October 7, 2016 Share Posted October 7, 2016 Hi I fancy having a go at my first upgraded gun but I'm a little unsure on the gearbox. The gun I'm going to up grade is cm.028u I want to try and get it to a support weapon. So far for my own amusement I've got the following upgrades, hopup and rubber, inner barrel, spring 100/m , Now I want to speed up the rate of fire with a high speed short motor..... Here's where I'm stuck do I need to upgrade the gears or can I run with the original factory fitted kit by CYMA??? Link to comment Share on other sites More sharing options...
Supporters Samurai Posted October 7, 2016 Supporters Share Posted October 7, 2016 You can run it with original gears, but make sure everything runs smoothly and AOE is correct. Link to comment Share on other sites More sharing options...
GreenDragon Posted October 7, 2016 Author Share Posted October 7, 2016 AOE? Link to comment Share on other sites More sharing options...
GreenDragon Posted October 7, 2016 Author Share Posted October 7, 2016 Its OK I worked it out. Cheers for the advice. Link to comment Share on other sites More sharing options...
ikarma70 Posted October 31, 2016 Share Posted October 31, 2016 Changing the plugs to deans will help the ROF and it's very cheap to do if you can solder and if you can't, here is a good opportunity to learn. Link to comment Share on other sites More sharing options...
Supporters ImTriggerHappy Posted October 31, 2016 Supporters Share Posted October 31, 2016 Changing the plugs to deans will help the ROF and it's very cheap to do if you can solder and if you can't, here is a good opportunity to learn.No it won't changing to deans has a very slight difference on trigger response because its a cleaner path. For higher rof it's about gearing ratios and motor speed. You can increase motor speed by using a higher voltage battery but the change to deans is too small to affect rof in a noticeable way. Especially as most airsofters can't solder for crap and create some great dry joints the make the change pointless and that includes a lot of shop techs. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.