Extended barrel/suppressor

[Potential Threat]

Morning all

 

I've fitted the Dangerwerx cqb valve to my vector to drop the fps. It was firing at 380fps now with the valve it's down to about 270fps. A bit to much for my liking. I've been told to look for an extended barrel/suppresor but not having much luck. Can anybody enlighten me. I've been told itll bring the fps back up to about 330-340 which would be perfect.

[Russe11]

could you not have just used 144a gas?

[cavninja]

I'm guessing the Dangerwerx valve is not adjustable? Can the Vector be fitted with an NPAS? I've tried all the different gas types, none make a real difference. The NPAS offers an adjustable solution. I also looked at muzzle velocity reducing flash hiders, they come with different spacer bands that allow you to adjust the amount of reduction, it's not ideal, but it may work for you.

 

Good luck!

[Lozart]

They CAN be fitted with an NPAS if you can find one in stock.

[Potential Threat]

I was looking for an npas kit originally but couldn't find anywhere that was sticking them. After a month of looking I gave in and bought the Dangerwerx kit. I've tried different gasses too. I'm only getting minor changes though. The extended barrel/suppressor would be great if it works

[M_P]

Npas systems tend to not be that great as well.

There are definitely suppressors available for the vectors, and id assume the inner barrels are the same cut as kwa pistols/gbbrs.

[Lozart]

Buddy of mine has a Vector that runs around 270 after being fitted with a flute valve. He just runs it on green gas to bump it back up. Works well even on the lower FPS to be honest.

[Potential Threat]

I tried it with the nuprol 3.0 which is supposed to be the more powerful but still not getting any higher than 280.

[straffham]

Take it its the floating valve in the blowback unit? Could it be reduced in diameter a little by turning/filing/sanding to allow more gas flow?

[GiantKiwi]

I tried it with the nuprol 3.0 which is supposed to be the more powerful but still not getting any higher than 280.

 

Sounds like you muffed the install then. I've done it to 6 vectors now, and all of them were floating around 380-390 at stock. With the CQB valve and Green Gas, none of them has done any less than 320fps. Nuprol 3 should bump that to more like 360-370..

[Potential Threat]

 

Sounds like you muffed the install then. I've done it to 6 vectors now..

Which valve did you fit? Rah tech or Dangerwerx?

[GiantKiwi]

Dangerwerx. The RAT is junk.