top rail for Type 56-2?

[two_zero]

So yea.. got a Real Sword Type 56-2 and I want to mount an optic on it.. which rails will fit? I was thinking maybe if there's anyway to get a top rail onto the handguard? preferable without any side/bottom rails. I don't want to change the appearance/tacticool-it more than necessary.

[jcheeseright]

get a real one, it's a real norinco receiver so it'll go on without any issue.

[Unrustle_Thine_Jimmies]

But do note that Norinco AKs are slightly different in small tolerances and dimensions than Russian,Bulgarian and Romanian AKs. You might have to do a bit of filing,but otherwise,real parts should fit with no massive hassle.

[two_zero]

Where from? thing about using a real one is they tend to be pretty costy? and since I more likely than not will have to file some anyway?

it's a real norinco receiver

I'm so damn excited to get to use this gun.....!

[Unrustle_Thine_Jimmies]

Swedes are not allowed guns and parts(without a license all all that cack) it might be a bugger to get. You can try importing from Finland or somewhere where funs are allowed.

[two_zero]

not sure about the gunparts.. I've been away too long thou, gotta read up on the laws. Funny thing what's seen as a gun part.. I dunno about the type56, but I udnerstand the SVD has it's barrel cut in such way that it can't be used.. so is this a gunpart? while a friend of mine (legally and with license) converted a .22 airpistol into a .22 lr. yet the airpistol barrel would not have counted as a gunpart... and anyone could make a crud pistol from what can be found in a home.. and that gun would be illegal, even thou it probably would be less dangerous (for whatever aimed at atleast) than a legal airgun.

anyway...back to topic.. think something like this clamped to the gas tube in front of the upper handguard could work?

[two_zero]

not sure if you can weld on that, but even welding a longer rail on top of that that extends a bit over the handguard, so to fit the optic