My new toy....TM CQBR

[Sam_G]

This will be a bit of an ongoing project.

 

Picked up a slightly tired TM CQBR recoil.

 

The internals are solid and the recoil is nice and crisp. BUT the externals are a little worn.

 

Bit for it so far are just out of my kit bag and left over form my old VFC SR-16.

 

EOTech 552

KAC fore grip

Weapon light in Element mount

 

it came with:

 

Genuine Magpul MBUS rear sight

Clone ARMS folding front sight

and a mega rare Eagle 6 7.4 3200 lipo.

 

 

Internals are going to be upgarded once funds permit.

[Sam_G]

This thing is dam accurate. Putting out 290fps.

[Happy]

It's a TM they're all accurate

 

What sort of range is this hitting consistent groupings?

[Sam_G]

I'll do a proper test later today. Need to be careful as i dont have the charger adapter for my lipo yet and unsure on its charge level at the mo.

[Sam_G]

 

Now she's green!

 

[Sam_G]

This is turning into a right lemon!

 

Had feeding issues with all mags and have had to place a small piece of soft side velcro in the mag well to force the mags forward for it to feed. So that is sorted if a little bodged!

 

Now the thing is eating fuses. 4 in a day. I have taken the stock off......this is where the issues start.

 

The rear connector on the stock tube has not been tightened properly which meant i have damaged them taking the stock off! The wire cover, which is the bit with the stock position holes in it, has 2 screws holding it in place. These screws have been threaded and the internal threads on the tube are so badly damaged they have fallen apart!

 

Now i need a new stock tube and will be rewiring it to remove the quick change battery set up so i can use normal lipos.

 

few pics of the issues: