Ouzx Posted March 7, 2013 Share Posted March 7, 2013 Looking at buying one of the above in the future. Enjoy the small compact size, and the looks of both. Any have major down sides or faults? Or which do you prefer? http://www.landwarriorairsoft.com/acatalog/KWA-KRISS-Vector-GBB---PRE-ORDER-DEPOSIT-EB_PDR.html#.UTkf5xwvUUU http://www.landwarriorairsoft.com/acatalog/KWA-Glock-17--Metal-Slide--DE_KRISSVECTOR.html#.UTkgExwvUUU Thank-you for looking. Link to comment Share on other sites More sharing options...
tandy Posted March 8, 2013 Share Posted March 8, 2013 The PDR is an aeg and the kriss is a GBB, take that into account, mags far more expensive for GBB but I have just had a friend buy a PDR an send it straight back because it broke within a couple of hours Link to comment Share on other sites More sharing options...
Ouzx Posted March 8, 2013 Author Share Posted March 8, 2013 I suppose, KRISS Vector mags are near £50 each and only hold 40 odd rounds. Link to comment Share on other sites More sharing options...
Sam_G Posted March 8, 2013 Share Posted March 8, 2013 I'd have the PDR of the Kriss. THe Kriss is UGLY!!! Plus side the PDR takes any M4 AEG mags! Link to comment Share on other sites More sharing options...
Supporters M_P Posted March 8, 2013 Supporters Share Posted March 8, 2013 Assuming it'd be a cqb gun I'd go with the kriss, it'd be far more satisfying to use. More espensive though. That and the kiss is much better looking Link to comment Share on other sites More sharing options...
Nickona Posted March 8, 2013 Share Posted March 8, 2013 Apparently the PDR is really iffy on mags.. Link to comment Share on other sites More sharing options...
Supporters TPI Posted March 8, 2013 Supporters Share Posted March 8, 2013 I know the UAR need mag's to be modified not heard of the PDR doing it but i have heard the PDR trigger mech is shit... still prefer a PDR to Kriss but only because of Mag compatibility If Only KWA re engineered the Glock's so they'ed be able to use the same mag's... Link to comment Share on other sites More sharing options...
Supporters M_P Posted March 8, 2013 Supporters Share Posted March 8, 2013 THey don't make a .45 glock as far as I'm aware so that's the issue. Loads of people complained that the kriss didn't take Glock mags but then the real one doesn't use 9mm ones anyway (unless they do a 9mm variant) Nick meant iffy as in feeding-wise I assume. The trigger issues will probably be due to the micro switch, assuming it uses a similar setup to the Masada. Link to comment Share on other sites More sharing options...
Chippins Posted March 8, 2013 Share Posted March 8, 2013 If you have broad shoulders I wouldnt go for either of them, particularly not the PDR, its tiny! Link to comment Share on other sites More sharing options...
Nickona Posted March 9, 2013 Share Posted March 9, 2013 Yea, apparently basically nothing feeds with them, beta project pmags don't feed not use on the PTS ones though.. Link to comment Share on other sites More sharing options...
Kaneweeks Posted March 10, 2013 Share Posted March 10, 2013 Externally and visual aspects, for me, its the Kriss, everyday of the week. Then I think of the power source, being a gbb RIF, then I start edging towards the Mapgul PDR. The main reason for this would be the cost and effort a gbb RIF requires, but I think that's because im a lazy son of a...... If I had the time and money to run with a gbb Kriss, I would, without a shadow of a doubt. But until then, its an aeg for me, so its got to the Magpul PDR . I've also heard quite a few owners say about the mag problem. Link to comment Share on other sites More sharing options...
the_robbo Posted March 10, 2013 Share Posted March 10, 2013 There will be an AEG version of the Kriss released and it will be a no brainer which one to go for Link to comment Share on other sites More sharing options...
Ouzx Posted March 10, 2013 Author Share Posted March 10, 2013 Any idea on the release date? Link to comment Share on other sites More sharing options...
Supporters TPI Posted March 10, 2013 Supporters Share Posted March 10, 2013 A couple of year's goinbg by their usual time's.. @M_P Doood how do you not know their are Glock's made in 45? *Respect Meter Failing* Link to comment Share on other sites More sharing options...
Supporters M_P Posted March 10, 2013 Supporters Share Posted March 10, 2013 I do, sorry I meant they as in KWA, That was my point lol Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.